HRS FH19SC-15S

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
0.5mm pitch, 0.9mm above the board,
Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
FH19C & FH19SC Series
Actuator color: Brown
FH19SC – FPC/FFC thickness: 0.3±0.03mm
Actuator color: Black
■Features
● 0.9mm high
1. Low-profile 0.5mm pitch FPC/FFC Connectors
Miniaturization of portable equipment and personal mobile
devices has created increased demand for a low profile,
high density, and high reliability connectors.
2. Conductive traces on the PCB can run under
the connector
0.9mm
17m
m
m
3m
*The design of this connector has been made thinner and
smaller, with a height of 0.9mm and width of 3mm.
*PCB footprint: Reduced approximately 48% (as compared with
Hirose Electric's 0.5mm pitch FH12 Series connectors)
*Connector weight: Reduced approximately 78% (as compared
with Hirose Electric's 0.5mm pitch FH12 Series connectors)
● Can be mounted over conductive traces
All bottom surface of the connector is solid, without any
exposure of the contact.
3. Proven Flip-Lock Actuator System assures
easy and reliable operation
Rotating actuator permits easy insertion and reliable
connection with the FPC & FFC.
Tactile sensation confirms complete mechanical locking of
the actuator and the electrical connection.
Enclosed construction
(No exposed contacts)
Metal fittings
(Leadless)
4. Accepts 0.2mm & 0.3mm thick FPC/FFC
No exposed contacts on the bottom of the connector.
The connector will also terminate with 0.2mm thick Flat
Flexible Cable (FFC).
5. Board placement with automatic equipment
Flat upper surface and tape and reel packaging facilitate
vacuum pick-up and placement. Standard reel packaging
contains 5000 connectors.
6. Halogen-free * (FH19C,FH19SC(11 to 50pos.))
● Metal Fittings (Leadless Type)
No protrusions on the sides
allows close side-by-side
board placement.
● Actuator Temporary Hold Mechanism
*As defined by IEC61249-2-21
Br-900ppm maximum, Cl-900ppm maximum,
Actuator stays open during insertion of the FPC/FFC.
2010.9
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Product Specifications
Operating temperature range
-55ç to +85ç (Note 2)
Operating humidity range
Relative humidity 90% max. (No condensation)
Current rating 0.5 A (Note1)
Rating
Voltage rating 50 V AC
Recommended
FPC, FFC
FH19C Series
Thickness: = 0.2 ± 0.03mm Gold plated
FH19SC Series
Thickness: = 0.3 ± 0.03mm Gold plated
Storage temperature range
-10ç to +50ç (Note 3)
Storage humidity range
Relative humidity 90% max. (No condensation)
Item
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
Specification
500 M ohms min.
No flashover or insulation breakdown
100 m ohms max.
*Including FPC/FFC conductor resistance
100 V DC
150 V AC/1 minute
Conditions
4. Durability
(insertion/ withdrawal)
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
20 cycles
5. Vibration
No electrical discontinuity of 1 µs or more.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
Frequency: 10 to 55 Hz, single amplitude of
0.75mm, 10 cycles in each of the 3 directions
6. Shock
No electrical discontinuity of 1 µs. min.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
Acceleration of 981 m/s2, 6 ms duration, sine halfwave waveform, 3 cycles in each of the 3 axis.
7. Humidity
(Steady state)
Contact resistance: 100 m ohms max.
Insulation resistance: 100 M ohms min.
No damage, cracks, or parts dislocation.
96 hours at temperature of 40ç and humidity of
90 to 95%
8. Temperature cycle
Contact resistance: 100 m ohms max.
Insulation resistance: 100 M ohms min.
No damage, cracks, or parts dislocation.
Temperature: -55ç / +15ç to +35ç / +85ç / +15ç to +35ç
Time
: -30 /
2 to 3
/ +30 / 2 to 3(Minutes)
5 cycles
9. Resistance to
soldering heat
No deformation of components affecting performance. Manual soldering: 350ç±5ç for 5 seconds
1 mA
Reflow: At the recommended temperature profile
Note 1: When passing the current through all of the contacts, use 70% of the current rating.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term “storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.Information
Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
■Materials
Part
Insulator
Material
LCP
Actuator
PPS/LCP
Contacts
Metal fittings
Phosphor bronze
Phosphor bronze
Finish
Color: Beige
Color: Brown (FH19C Series)
Color: Black (FH19SC Series)
Gold plated
Pure tin reflow plated
Remarks
UL94V-0
-------------
■Ordering information
FH 19 C - 30S - 0.5 SH (05)
1
2
3
4
5
1 Series name :
FH
5 Contact pitch : 0.5mm
2 Series No. :
19
6 Terminal type
3
FPC/FFC thickness : 0.2mm
FPC/FFC thickness : 0.3mm
C :
SC :
7
SH: SMT horizontal mounting type
7 Material and plating specifications :
4 No. of contacts : 4 to 50
PPS
LCP
Contact: Gold plated
Actuator material
------
(05)
Contact: Gold plating with nickel barrier
------
(10)
FH19SC Contact: Gold plated
4 to 10 pos. Contact: Gold plating with nickel barrier
FH19SC Contact: Gold plated
(05)
------
(06)
------
------
(05)
11 to 50 pos. Contact: Gold plating with nickel barrier
------
(09)
FH19C
2
6
Halogen Free
YES
NO
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Connector Dimension
[FH19C Series]
3
A±0.15
B
+0.15
0
(0.15)
2.5±0.15
(1)
0.15 G
0.5
0.5
0.9±0.1(Including contact terminal leads)
G
∞Number of contacts
Polarizing mark indicator
(0.5)
A
(130°)
(1.6)
Number of contacts indicator
(0.15)
(C: FPC insertion slot dimension)
2
0.15MAX
1
0.15MAX
D±0.1
(1.3)
1
2
S
2.15±0.2
Notes 1 The coplanarity of each terminal lead and metal fitting is within 0.1
2 The contact terminal lead position indicates the dimension from the bottom surface of the insulator body.
3 Difference between terminal contact to be max. 0.1mm.
4 Packaged on tape and reel only. Check packaging specification.
5 Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector.
6 After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit: mm
A
B
C
D
4
4
1.5
2.57
3.35
5
4.5
2
3.07
3.85
6
5
2.5
3.57
4.35
7
5.5
3
4.07
4.85
8
6
3.5
4.57
5.35
9
6.5
4
5.07
5.85
580-0412-7-**
10
7
4.5
5.57
6.35
580-0413-0-**
12
8
5.5
6.57
7.35
FH19C-13S-0.5SH(**)
580-0405-1-**
13
8.5
6
7.07
7.85
FH19C-15S-0.5SH(**)
580-0406-4-**
15
9.5
7
8.07
8.85
FH19C-17S-0.5SH(**)
580-0408-0-**
17
10.5
8
9.07
9.85
11.35
Part Number
CL No.
Number of Contacts
FH19C-04S-0.5SH(**)
580-0410-1-**
FH19C-05S-0.5SH(**)
580-0418-3-**
FH19C-06S-0.5SH(**)
580-0409-2-**
FH19C-07S-0.5SH(**)
580-0411-4-**
FH19C-08S-0.5SH(**)
580-0404-9-**
FH19C-09S-0.5SH(**)
580-0403-6-**
FH19C-10S-0.5SH(**)
FH19C-12S-0.5SH(**)
FH19C-20S-0.5SH(**)
580-0402-3-**
20
12
9.5
10.57
FH19C-21S-0.5SH(**)
580-0414-2-**
21
12.5
10
11.07
11.85
FH19C-24S-0.5SH(**)
580-0407-7-**
24
14
11.5
12.57
13.35
FH19C-27S-0.5SH(**)
580-0401-0-**
27
15.5
13
14.07
14.85
FH19C-30S-0.5SH(**)
580-0400-8-**
30
17
14.5
15.57
16.35
FH19C-34S-0.5SH(**)
580-0419-6-**
34
19
16.5
17.57
18.35
FH19C-40S-0.5SH(**)
580-0416-8-**
40
22
19.5
20.57
21.35
FH19C-50S-0.5SH(**)
580-0417-0-**
50
27
24.5
25.57
26.35
Note1: Embossed tape reel packaging (5,000 pieces/reel).
Order by number of reels.
Note2: **Specification. Refer to ordering information.
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
[FH19SC Series]
3
A±0.15
(0.15)
2.5±0.15
(1)
0.15 G
0.5
0.5
+0.15
0
G
∞Number of contacts
0.93±0.1(Including contact terminal leads)
B
A
Polarizing mark indicator
(0.5)
5
(130°)
(1.6)
Number of contacts indicator
(0.15)
(C: FPC insertion slot dimension)
2
1
0.15MAX
D±0.1
0.15MAX
(1.3)
1
S
2.15±0.2
Notes 1
2
3
4
5
6
7
The coplanarity of each terminal lead and metal fitting is within 0.1
The contact terminal lead position indicates the dimension from the bottom surface of the insulator body.
Difference between terminal contact to be max. 0.1mm.
Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector.
The contacts are protruding. 0.03mm max. from the housing top surface.
Packaged on tape and reel only. Check packaging specification.
After reflow, the terminal plating may change color, however this does not represent a quality issue.
CL No.
Number of Contacts
A
B
C
D
FH19SC-04S-0.5SH(**)
580-0517-5-**
4
4
1.5
2.57
3.35
FH19SC-05S-0.5SH(**)
580-0515-0-**
5
4.5
2
3.07
3.85
FH19SC-06S-0.5SH(**)
580-0501-5-**
6
5
2.5
3.57
4.35
FH19SC-08S-0.5SH(**)
580-0520-0-**
8
6
3.5
4.57
5.35
FH19SC-09S-0.5SH(**)
580-0507-1-**
9
6.5
4
5.07
5.85
FH19SC-10S-0.5SH(**)
580-0508-4-**
10
7
4.5
5.57
6.35
FH19SC-12S-0.5SH(**)
580-0512-1-**
12
8
5.5
6.57
7.35
FH19SC-13S-0.5SH(**)
580-0518-8-**
13
8.5
6
7.07
7.85
FH19SC-14S-0.5SH(**)
580-0509-7-**
14
9
6.5
7.57
8.35
FH19SC-15S-0.5SH(**)
580-0503-0-**
15
9.5
7
8.07
8.85
FH19SC-16S-0.5SH(**)
580-0521-2-**
16
10
7.5
8.57
9.35
FH19SC-17S-0.5SH(**)
580-0504-3-**
17
10.5
8
9.07
9.85
FH19SC-18S-0.5SH(**)
580-0519-0-**
18
11
8.5
9.57
10.35
FH19SC-20S-0.5SH(**)
580-0502-8-**
20
12
9.5
10.57
11.35
FH19SC-21S-0.5SH(**)
580-0505-6-**
21
12.5
10
11.07
11.85
FH19SC-22S-0.5SH(**)
580-0506-9-**
22
13
10.5
11.57
12.35
FH19SC-24S-0.5SH(**)
580-0511-9-**
24
14
11.5
12.57
13.35
FH19SC-26S-0.5SH(**)
580-0510-6-**
26
15
12.5
13.57
14.35
FH19SC-27S-0.5SH(**)
580-0516-2-**
27
15.5
13
14.07
14.85
FH19SC-28S-0.5SH(**)
580-0513-4-**
28
16
13.5
14.57
15.35
FH19SC-30S-0.5SH(**)
580-0500-2-**
30
17
14.5
15.57
16.35
FH19SC-32S-0.5SH(**)
580-0514-7-**
32
18
15.5
16.57
17.35
FH19SC-40S-0.5SH(**)
580-0522-5-**
40
22
19.5
20.57
21.35
FH19SC-45S-0.5SH(**)
580-0523-8-**
45
24.5
22
23.07
23.85
FH19SC-50S-0.5SH(**)
580-0524-0-**
50
27
24.5
25.57
26.35
Note1: Embossed tape reel packaging (5,000 pieces/reel) .
Order by number of reels.
Note2: **Specification. Refer to ordering information.
4
Unit: mm
Part Number
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Recommended PCB Land and Metal Mask Dimensions
[Common to FH19C & FH19SC Series]
Recommended metal mask thickness: 0.10 mm.
0.8±0.05
B ∞Number of contacts
H
(0.2)
(0.15)
0.8±0.05
3.3±0.05
(0.05)
J±0.1
(3)
(0.15)
0.3±0.05 (Land)
0.25±0.05 (Metal mask)
(0.15) (0.15)
0.1 H
(2.5)
0.5
K±0.1
(A)
■Recommended FPC, FFC Dimensions
[Common to FH19C & FH19SC Series]
L±0.05
FH19C Series FH19SC Series
0.2±0.03
0.3±0.03
(X)
3.5 min. (Stiffener)
2.5±0.3
(Exposed traces)
2R0
0.35±0.03(FPC)
0.3±0.03(FFC)
0.5±0.03
3.5 min. (Stiffener)
B±0.03
.2
0.5±0.07
Note 1: Stiffener dimension should be 3.5mm min., and X dimension should be 0.5mm for improved flexibility of FPC.
Unit: mm
Number of Contacts
4
5
6
7
8
9
10
12
13
14
15
16
17
18
A
4.0
4.5
5.0
5.5
6.0
6.5
7.0
8.0
8.5
9.0
9.5
10.0
10.5
11.0
B
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.5
6.0
6.5
7.0
7.5
8.0
8.5
J
3.1
3.6
4.1
4.6
5.1
5.6
6.1
7.1
7.6
8.1
8.6
9.1
9.6
10.1
K
3.9
4.4
4.9
5.4
5.9
6.4
6.9
7.9
8.4
8.9
9.4
9.9
10.4
10.9
L
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.5
7.0
7.5
8.0
8.5
9.0
9.5
Unit: mm
Number of Contacts
20
21
22
24
26
27
28
30
32
34
40
45
50
A
12.0
12.5
13.0
14.0
15.0
15.5
16.0
17.0
18.0
19.0
22.0
24.5
27.0
B
9.5
10.0
10.5
11.5
12.5
13.0
13.5
14.5
15.5
16.5
19.5
22.0
24.5
J
11.1
11.6
12.1
13.1
14.1
14.6
15.1
16.1
17.1
18.1
21.1
23.6
26.1
K
11.9
12.4
12.9
13.9
14.9
15.4
15.9
16.9
17.9
18.9
21.9
24.4
26.9
L
10.5
11.0
11.5
12.5
13.5
14.0
14.5
15.5
16.5
17.5
20.5
23.0
25.5
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■FH19C & FH19SC Series FPC/FFC Construction (Recommended Specifications)
1. Using Single-sided FPC
FPC : Flexible Printed Circuit
Material
Material Name
Covering layer film
Polyimide
1 mil thick
Cover adhesive
(25)
(25)
(25)
3
3
35
35
Surface treatment
Copper foil
Cu
Base adhesive
Thermosetting adhesive
25
25
Base film
Polyimide
1 mil thick
25
25
Reinforcement material adhesive Thermosetting adhesive
30
30
75
175
193
293
Polyimide
1oz
FH19C : 3mil
FH19SC: 7mil
Total
FPC : Flexible Printed Circuit
Material Name
Covering layer film
Cover adhesive
Material
Polyimide
1 mil thick
Thickness (µm)
FH19C FH19SC
(25)
(25)
(25)
(25)
3
3
15
15
Surface treatment
Nickel under plated 1 to 5µm /
Gold plated 0.2µm
Through-hole copper
Cu
Copper foil
Cu
18
18
Base adhesive
Thermosetting adhesive
18
18
Base film
Polyimide
25
25
1/2oz
1 mil thick
Base adhesive
18
18
Copper foil
Cu
18
18
Cover adhesive
Thermosetting adhesive
25
25
Covering layer film
Polyimide
1 mil thick
25
25
Reinforcement material adhesive
Thermosetting adhesive
25
50
25
100
197
297
Polyimide
Stiffener
1/2oz
FH19C : 1mil
FH19SC: 4mil
Total
3. Using FFC (Flexible Flat Cable)
(25)
Nickel under plated 1 to 5µm /
Gold plated 0.2µm
Stiffener
2. Using Double-sided FPC
Thickness (µm)
FH19C FH19SC
FFC : Flexible Flat Cable
Material Name
Material
Polyester film
Adhesive
Polyester thermoplastic type
(Nickel under plated / Gold plated), soft copper film
Adhesive
Polyester
Thickness (µm)
FH19C FH19SC
(12)
(12)
(30)
(30)
35
35
30
30
12
12
Adhesive
Polyester
30
30
Stiffener
Polyester
100
188
Total
207
295
Polyester
* Practical tolerance of thickness dimension is ±20µm (i.e., 187 to 227µm).
4. Precautions
1. This specification is a recommendation for the construction of the FH19C/
Series FPC and FFC (t=0.2±0.03).
2. For details about the construction, please contact the FPC/FFC manufacturers.
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Packaging Specifications
[Common to FH19C & FH19SC Series]
● Embossed Carrier Tape Dimensions
8±0.1
(Q)
Ø1
.5
(0.3)
(3.3)
Flat surface for placement
with automatic equipment
(4.3)
Unreeling direction
M±0.3
1.75±0.1
2±0.15
+
0.
0 1
4±0.1
N±0.1
(1.7)
(1)
(Ø1
3)
●Reel Dimensions
(Ø80)
(Ø380)
(R:INSIDE)
(T:OUTSIDE)
End cection
Blank cection
Mounting cection
Embossed carrier tape
(10 pockets min.)
Lead cection (400 mm min.)
Blank cection
Top cover tape
(10 pockets min.)
Unit: mm
Number of Contacts
4
5
6
7
8
9
10
12
13
14
15
16
17
18
M
16
16
16
16
16
16
16
16
16
16
16
24
24
24
N
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
11.5
11.5
11.5
Q
4.3
4.8
5.3
5.8
6.3
6.8
7.3
8.3
8.8
9.3
9.8
10.3
10.8
11.3
R
17.4
17.4
17.4
17.4
17.4
17.4
17.4
17.4
17.4
17.4
17.4
25.4
25.4
25.4
T
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
29.4
29.4
29.4
Unit: mm
Number of Contacts
20
21
22
24
26
27
28
30
32
34
40
45
50
M
24
24
24
24
24
24
24
24
32
32
44
44
44
N
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
14.2
14.2
20.2
20.2
20.2
Q
12.3
12.8
13.3
14.3
15.3
15.8
16.3
17.3
18.3
19.3
22.3
24.8
27.3
R
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
33.4
33.4
45.4
45.4
45.4
T
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
37.4
37.4
49.4
49.4
49.4
Note: 5,000 pieces per reel.
Embossed tape 32 mm or wider will have perforated feed holes on two sides.
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Recommended Temperature Profile
[For FH19C & FH19SC Series]
MAX 250ç
250
230ç
Temperature(ç)
200
HRS test condition
Solder method
Solder composition
(Senju Metal Industry, Co., Ltd.’s Part
Number:M705-221CM5-32-10.5)
200ç
150
150ç
:Reflow, IR/hot air
:Paste, 96.5%Sn/3.0%Ag/0.5%Cu
Test board
:Glass epoxy 45mm∞100mm∞1.6mm thick
Land dimensions
Metal mask
:0.3mm∞0.8mm
:0.25mm∞0.8mm∞0.1mm
This temperature profile is based on the above conditions.
100
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and board
size/thickness. Consult tour solder paste and equipment
50
25ç (60 sec.)
90 sec. to 120 sec.
(60 sec.)
0
Start
Preheating
Time (Seconds)
8
Soldering
manufacturer for specific recommendations.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Operation and Precations
Operation
1. FPC/FFC Termination procedure.
Connector installed on the board.
Precautions
1) Do not apply excessive force or use any type of
tool to operate the actuator.
1) Lift up the actuator. Use thumb or index finger.
2) Assure that the FPC/FFC is fully inserted parallel
to mounting surface, with the exposed conductive
traces facing down.
2) The connector will assure reliable performance
when the actuator is open to 130° maximum.
Do not exceed this angle, as this may cause
permanent damage to the connector.
FPC conductor surface
(Bottom side)
3) Rotate down the actuator until firmly closed.
It is critical that the inserted FPC/FFC is not moved
and remains fully inserted. Should the FPC/FFC be
moved, open the actuator and repeat the process,
starting with Step 1 above.
3) Application of excessive force to the inserted
FPC/FFC may cause damage to connector and
may affect the reliability of electrical connection.
If specific application
requires continuous or
repeated pull or bend of
the inserted FPC/FFC,
assure that the forces are
NOT transmitted directly
to the connector.
2. FPC/FFC Removal
1) Lift up the actuator.
2) Carefully remove the FPC/FFC.
9