RCD ZJ2

ZERO-OHM JUMPERS, 2A to 25A
RESISTORSCAPACITORSCOILSDELAY LINES
ZJ SERIES - INSULATED
Z SERIES - UNINSULATED
RoHS
Industry’s widest range of zero-ohm jumpers
Low cost, delivery from stock
Commercial & military applications
3 standard styles- insulated, uninsulated, &
surface mount (also refer to ZC Series for thickfilm chip jumpers and ZCF for cylindrical MELF)
Horizontal and vertical tape & reel available
Custom models to 50A available
L
.95 [24] Min.
D
d
Inch [mm]
Term.W is
RoHS
compliant
& 260°C
compatible
RCD “zero-ohm” jumpers were developed for use as interconnection devices
between points on a PCB when separated by circuit paths, or when the pcb
layout has been changed requiring new point connections. Specify ZJ Series
(insulated bodies) when jumpers are in close proximity with conductor paths.
Specify Z Series (uninsulated tin plated copper) for circuits involving higher
current levels. In addition to the 4 standard wire sizes listed (18-22 awg),
Series Z is available in a wide range of custom sizes (12-26awg). RCD’s
Z1206 SM jumper achieves the industry’s highest current rating in a 1206size due to the heavy duty tin plated copper element. The ultra low resistance
of type Z1206 (.00012Ω) is 25-400 times better than conventional models!
Z1206 is formed into a U-shape to provide 500V isolation clearance.
SERIES ZJ INSULATED JUMPER SPECIFICATIONS
RCD
Type
ZJ1
ZJ1B
ZJ2
ZJ2B
ZJ3
Military
Type
L
±.015 [.4]
.145 [3.4]
AA55502 .145 [3.4]
.250 [6.4]
AA55501 .250 [6.4]
.335 [8.5]
D
d
Maximum Amp. Rating Dielectric
±.012 [.3] ±.003 [.08] Resistance
@70°C*
Strength
.061 [1.55] .020 [.5]
.02Ω
2A
300V
.061 [1.55] .020 [.5]
.01Ω
5A
300V
.090 [2.3]
.024 [.6]
.02Ω
3A
500V
.090 [2.3]
.024 [.6]
.01Ω
10A
500V
.110 [2.8] .025 [.63]
.02Ω
5A
500V
Operating Temp.
R an g e
-55 to +155°C
-55 to +155°C
-55 to +155°C
-55 to +155°C
-55 to +155°C
Qty per
Reel, Typ.
5000
5000
5000
5000
4000
* Increased current ratings available
.126±.008
[3.2±0.20]
2.36 ±.12 [60 ±3]*
.050±.008
[1.27±0.20]
.200
[5]
d
.016±.002
[.40±0.05]
.062±.004
[1.57±0.10]
2.06 [52.4] std, 26-100mm avail.
* Lengths from 0.2” to 6” [5 to 152mm] are avail.
SERIES Z UNINSULATED JUMPER SPECIFICATIONS
RCD
Type
d ±.003
[.08]
≈Wire
Gauge
Z22
.024 [.6] 22 AWG
Resistance Max. Amp
Qty per
(Ω
Ω / inch) Rating 25°C Reel, Typ.
≈.0015Ω
10A
10,000
Z21
.028 [.7] 21 AWG
≈.0011Ω
15A
8,000
Z20
.031 [.8] 20 AWG
≈.0009Ω
20A
8,000
Z18
.040 [1]
≈.0006Ω
25A
5,000
18 AWG
SERIES Z1206 SM JUMPER SPECIFICATIONS
Resistance (25°C, no load)
Current Rating †
Inductance
Isolation Voltage
Soldering Temp.
Operating Temp. Range
Amperage Derating
†
Requires suitably heavy-duty conductor paths to carry high currents
SERIES Z and ZJ Cut & Form Options
P/N DESIGNATION:
Most popular sizes are listed below but any W & H dimension from 0.2 to 1”
[5 to 25mm] is available. Custom forming with standoffs also available.
RCD Type
C & F C ode
C2
C 12
C 25
C4
C5
W
.200 [5]
.25 [6.3]
.30 [7.6]
.40 [10]
.50 [12.7]
H
.250 [6.3]
.250 [6.3]
.250 [6.3]
.250 [6.3]
.250 [6.3]
120uS (0.00012S)
25A at 25°C
5nH
500V
260°C 10 Sec
-55°C to +175°C
Derate .667%/deg>25°C
ZJ2 -
T
W
Packaging: B = Bulk, T = Tape & Reel
H
W ± .02 [.5]
±.04 [1]
Optional Cut & Form Codes: C2 - C25, per
table. Leave blank if no forming (not applicable to
Z1206 which are formed as standard)
Termination: W= Lead-free, Q= Tin/Lead (leave
blank if either is acceptable)
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected]
FA066B
57
Sale of this product is in accordance with GF-061. Specifications subject to change without notice.