Part Number: ZM2CY53W 1.6x0.8mm SMD CHIP LED LAMP www.SunLED.com PRELIMINARY SPEC Features z1.6mmX0.8mm SMT LED, 1.1mm THICKNESS. zLOW POWER CONSUMPTION. zWIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE: 2000PCS / REEL . zMOISTURE SENSITIVITY LEVEL : LEVEL 3. zRoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). Operating Characteristics (TA=25°C) 2. Tolerance is ± 0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength Of Peak Emission (Typ.) (IF=20mA) λP 590 nm Wavelength Of Dominant Emission (Typ.) (IF=20mA) λD 589 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 20 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 45 pF IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation PT 84 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Published Date : FEB 28,2008 V 2.8 Forward Current Yellow 2.3 VF V ZM2CY53W VF Forward Voltage (Max.) (IF=20mA) 5 Emitting Color Forward Voltage (Typ.) (IF=20mA) Unit VR Part Number Unit M2CY (AlInGaP) Reverse Voltage Storage Temperature M2CY (AlInGaP) 140 Emitting Material AlInGaP mA mW °C Lens-color Water Clear Drawing No : SDSA6192 Luminous Intensity (IF=20mA) mcd min. typ. 110 297 V1 Wavelength nm λP Viewing Angle 2 θ 1/2 590 120° Checked : B.L.LIU P.1/4 Part Number: ZM2CY53W 1.6x0.8mm SMD CHIP LED LAMP www.SunLED.com M2CY Published Date : FEB 28,2008 Drawing No : SDSA6192 V1 Checked : B.L.LIU P.2/4 Part Number: ZM2CY53W 1.6x0.8mm SMD CHIP LED LAMP www.SunLED.com Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 28,2008 Drawing No : SDSA6192 V1 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com PACKING & LABEL SPECIFICATIONS Published Date : FEB 28,2008 ZM2CY53W 1.6x0.8mm SMD CHIP LED LAMP Drawing No : SDSA6192 ZM2CY53W V1 Checked : B.L.LIU P.4/4