SUNLED ZUR56W-1

Part Number:
www.SunLED.com
ZUR56W-1
3. 0mmx1.0 mm RIGHT ANGLE SMD CHIP LED LAMP
PRELIMINARY SPEC
Features
z 3.0mm x 1.0mm RIGHT ANGLE SMT LED, 2.5mm
THICKNESS.
z LOW POWER CONSUMPTION.
z WIDE VIEWING ANGLE.
z IDEAL FOR BACK LIGHT AND INDICATOR.
z VARIOUS COLORS AND LENS TYPES AVAILABLE.
zPACKAGE : 2000PCS / REEL.
zMOISTURE SENSITIVITY LEVEL : LEVEL 3.
zRoHS COMPLIANT.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.15(0.006") unless otherwise noted.
3.Specifications are subject to change without notice.
Absolute Maximum Ratings
(TA=25°C)
Operating Characteristics
(TA=25°C)
UR
(GaAsP/GaP)
Unit
UR
(GaAsP/GaP)
Unit
Forward Voltage (Typ.)
(IF=20mA)
VF
2.0
V
Reverse Voltage
VR
5
V
Forward Current
IF
30
mA
Forward Voltage (Max.)
(IF=20mA)
VF
2.5
V
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
iFS
160
mA
Reverse Current (Max.)
(VR=5V)
IR
10
uA
Power Dissipation
PT
75
mW
λP
627
nm
Operating Temperature
TA
-40 ~ +85
Wavelength Of Peak
Emission (Typ.)
(IF=20mA)
Tstg
-40 ~ +85
Wavelength Of Dominant Emission (Typ.)
(IF=20mA)
λD
625
nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=20mA)
Δλ
45
nm
Capacitance (Typ.)
(VF=0V, f=1MHz)
C
15
pF
Storage Temperature
Part
Number
ZUR56W-1
Emitting
Color
Red
Published Date : FEB 25,2008
Emitting
Material
GaAsP/GaP
°C
Lens-color
Water Clear
Drawing No :SDSA6242
Luminous
Intensity
(IF=20mA)
mcd
min.
typ.
10
19
V1
Wavelength
nm
λP
Viewing
Angle
2 θ 1/2
627
30°
Checked : B.L.LIU
P.1/4
Part Number:
www.SunLED.com
ZUR56W-1
3. 0mmx1.0 mm RIGHT ANGLE SMD CHIP LED LAMP
™ UR
Published Date : FEB 25,2008
Drawing No :SDSA6242
V1
Checked : B.L.LIU
P.2/4
Part Number:
www.SunLED.com
ZUR56W-1
3. 0mmx1.0 mm RIGHT ANGLE SMD CHIP LED LAMP
™ Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
™ The device has a single mounting surface. The device
must be mounted according to the specifications.
™ Tape Specification (Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : FEB 25,2008
Drawing No :SDSA6242
V1
Checked : B.L.LIU
P.3/4
Part Number:
www.SunLED.com
3. 0mmx1.0 mm RIGHT ANGLE SMD CHIP LED LAMP
PACKING & LABEL SPECIFICATIONS
Published Date : FEB 25,2008
ZUR56W-1
Drawing No :SDSA6242
ZUR56W-1
V1
Checked : B.L.LIU
P.4/4