ZXTN19100CFF 100V, SOT23F, NPN high gain power transistor Summary BVCEX > 200V BVCEO > 100V BVECO > 5V IC(cont) = 4.5A VCE(sat) < 60mV @ 1A RCE(sat) = 38m⍀ PD = 1.5W Complementary part number ZXTP19100CFF Description C Advanced process capability has been used to maximise the performance of this transistor. The SOT23F package is compatible with the industry standard SOT23 footprint but offers lower profile and higher dissipation for applications where power density is of utmost importance B Features E • High forward blocking voltage • Low saturation voltage • High gain • Low profile high dissipation package E Applications C • Relay and solenoid driving • DC fans • Industrial and automotive switching B Pinout - top view Ordering information Device ZXTN19100CFFTA Reel size (inches) Tape width (mm) Quantity per reel 7 8 3000 Device marking 1E5 Issue 1 - January 2007 © Zetex Semiconductors plc 2007 1 www.zetex.com ZXTN19100CFF Absolute maximum ratings Parameter Symbol Limit Unit Collector-base voltage VCBO 200 V Collector-emitter voltage (forward blocking) VCEX 200 V Collector-emitter voltage VCEO 100 V Emitter-collector voltage (reverse blocking) VECO 5 V Emitter-base voltage VEBO 7 V Continuous collector current(c) IC 4.5 A Base current IB 1 A ICM 6 A Peak pulse current 0.84 Power dissipation at Tamb = 25°C(a) Linear derating factor PD 6.72 W 1.34 mW/°C 10.72 W 1.5 mW/°C 12.0 W 2 mW/°C PD 16.0 W Tj, Tstg - 55 to 150 °C Symbol Limit Unit Junction to ambient(a) R⍜JA 149.3 °C/W Junction to ambient(b) R⍜JA 93.4 °C/W Junction to ambient(c) R⍜JA 83.3 °C/W Junction to ambient(d) R⍜JA 60 °C/W Power dissipation at Tamb = 25°C(b) Linear derating factor PD Power dissipation at Tamb = 25°C(c) Linear derating factor PD Power dissipation at Tamb = 25°C(d) Linear derating factor Operating and storage temperature range Thermal resistance Parameter NOTES: (a) For a device surface mounted on 15mm x 15mm x 1.6mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions. (b) Mounted on 25mm x 25mm x 1.6mm FR4 PCB with a high coverage of single sided 2 oz copper in still air conditions. (c) Mounted on 50mm x 50mm x 1.6mm FR4 PCB with a high coverage of single sided 2 oz copper in still air conditions. (d) As (c) above measured at t<5secs. Issue 1 - January 2007 © Zetex Semiconductors plc 2007 2 www.zetex.com ZXTN19100CFF Characteristics Issue 1 - January 2007 © Zetex Semiconductors plc 2007 3 www.zetex.com ZXTN19100CFF Electrical characteristics (at Tamb = 25°C unless otherwise stated) Parameter Symbol Min. Typ. Collector-base breakdown voltage BVCBO 200 240 V IC = 100A Collector-emitter breakdown voltage (forward blocking) BVCEX 200 240 V IC = 100A, RBE < 1k⍀ or -1V < VBE < 0.25V Collector-emitter breakdown voltage (base open) BVCEO 100 120 V IC = 10mA (*) Emitter-base breakdown voltage BVEBO 7 8.3 V IE = 100A Emitter-collector breakdown voltage (reverse blocking) BVECX 6 8.3 V IE = 100A, RBC < 1k⍀ or 0.25V > VBC > -0.25V Emitter-collector breakdown voltage (base open) BVECO 5 8 V IE = 100A, Collector-base cut-off current ICBO 50 nA VCB = 160V 20 A VCB = 160V, Tamb= 100°C <1 Max. Unit Conditions Collector-emitter cut-off current ICEX <1 100 nA VCE = 160V, RBE < 1k⍀ or -1V < VBE < 0.25V Emitter-base cut-off current IEBO <1 50 nA VEB = 5.6V Collector-emitter saturation voltage VCE(sat) 45 60 mV IC = 1A, IB = 100mA(*) 105 135 mV IC = 1A, IB = 20mA(*) 170 235 mV IC = 4.5A, IB = 450mA(*) Base-emitter saturation voltage VBE(sat) 950 1050 mV IC = 4.5A, IB = 450mA(*) Base-emitter turn-on voltage VBE(on) 880 1000 mV IC = 4.5A, VCE = 2V (*) Static forward current transfer ratio hFE 200 350 500 130 250 IC = 1A, VCE = 2V (*) 25 IC = 5A, VCE = 2V (*) Transition frequency fT 150 Input capacitance Cibo 305 Output capacitance Cobo 15.7 Delay time td Rise time IC = 0.1A, VCE = 2V (*) MHz IC = 100mA, VCE = 10V f =50MHz pF VEB = 0.5V, f = 1MHz (*) pF VCB = 10V, f = 1MHz (*) 28.3 ns tr 23.6 ns Storage time ts 962 ns VCC = 10V. IC = 500mA, IB1 = IB2= 50mA. Fall time tf 133 ns 25 NOTES: (*) Measured under pulsed conditions. Pulse width ⱕ300s; duty cycle ⱕ2%. Issue 1 - January 2007 © Zetex Semiconductors plc 2007 4 www.zetex.com ZXTN19100CFF Typical characteristics Issue 1 - January 2007 © Zetex Semiconductors plc 2007 5 www.zetex.com ZXTN19100CFF Intentionally left blank Issue 1 - January 2007 © Zetex Semiconductors plc 2007 6 www.zetex.com ZXTN19100CFF Package outline - SOT23F c D b e1 b e L1 L E E1 b E2 A1 R A Dim. Millimeters Inches Min. Max. Min. Max. A 0.80 1.00 0.0315 0.0394 A1 0.00 0.10 0.00 b 0.35 0.45 c 0.10 D 2.80 e e1 Millimeters Inches Min. Max. Max. Max. E 2.30 2.50 0.0906 0.0984 0.0043 E1 1.50 1.70 0.0590 0.0669 0.0153 0.0161 E2 1.10 1.26 0.0433 0.0496 0.20 0.0043 0.0079 L 0.48 0.68 0.0189 0.0268 3.00 0.1102 0.1181 L1 0.30 0.50 0.0153 0.0161 R 0.05 0.15 0.0019 0.0059 O 0° 12° 0° 12° 0.95 ref 1.80 Dim. 2.00 0.0374 ref 0.0709 0.0787 Note: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches Issue 1 - January 2007 © Zetex Semiconductors plc 2007 7 www.zetex.com ZXTN19100CFF Definitions Product change Zetex Semiconductors reserves the right to alter, without notice, specifications, design, price or conditions of supply of any product or service. Customers are solely responsible for obtaining the latest relevant information before placing orders. Applications disclaimer The circuits in this design/application note are offered as design ideas. It is the responsibility of the user to ensure that the circuit is fit for the user’s application and meets with the user’s requirements. No representation or warranty is given and no liability whatsoever is assumed by Zetex with respect to the accuracy or use of such information, or infringement of patents or other intellectual property rights arising from such use or otherwise. Zetex does not assume any legal responsibility or will not be held legally liable (whether in contract, tort (including negligence), breach of statutory duty, restriction or otherwise) for any damages, loss of profit, business, contract, opportunity or consequential loss in the use of these circuit applications, under any circumstances. Life support Zetex products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Zetex Semiconductors plc. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Reproduction The product specifications contained in this publication are issued to provide outline information only which (unless agreed by the company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned. Terms and Conditions All products are sold subjects to Zetex’ terms and conditions of sale, and this disclaimer (save in the event of a conflict between the two when the terms of the contract shall prevail) according to region, supplied at the time of order acknowledgement. For the latest information on technology, delivery terms and conditions and prices, please contact your nearest Zetex sales office. Quality of product Zetex is an ISO 9001 and TS16949 certified semiconductor manufacturer. To ensure quality of service and products we strongly advise the purchase of parts directly from Zetex Semiconductors or one of our regionally authorized distributors. For a complete listing of authorized distributors please visit: www.zetex.com/salesnetwork Zetex Semiconductors does not warrant or accept any liability whatsoever in respect of any parts purchased through unauthorized sales channels. ESD (Electrostatic discharge) Semiconductor devices are susceptible to damage by ESD. Suitable precautions should be taken when handling and transporting devices. The possible damage to devices depends on the circumstances of the handling and transporting, and the nature of the device. The extent of damage can vary from immediate functional or parametric malfunction to degradation of function or performance in use over time. Devices suspected of being affected should be replaced. Green compliance Zetex Semiconductors is committed to environmental excellence in all aspects of its operations which includes meeting or exceeding regulatory requirements with respect to the use of hazardous substances. Numerous successful programs have been implemented to reduce the use of hazardous substances and/or emissions. All Zetex components are compliant with the RoHS directive, and through this it is supporting its customers in their compliance with WEEE and ELV directives. Product status key: “Preview” Future device intended for production at some point. Samples may be available “Active” Product status recommended for new designs “Last time buy (LTB)” Device will be discontinued and last time buy period and delivery is in effect “Not recommended for new designs” Device is still in production to support existing designs and production “Obsolete” Production has been discontinued Datasheet status key: “Draft version” This term denotes a very early datasheet version and contains highly provisional information, which may change in any manner without notice. “Provisional version” This term denotes a pre-release datasheet. It provides a clear indication of anticipated performance. However, changes to the test conditions and specifications may occur, at any time and without notice. “Issue” This term denotes an issued datasheet containing finalized specifications. However, changes to specifications may occur, at any time and without notice. Zetex sales offices Europe Americas Asia Pacific Corporate Headquarters Zetex GmbH Kustermann-park Balanstraße 59 D-81541 München Germany Telefon: (49) 89 45 49 49 0 Fax: (49) 89 45 49 49 49 [email protected] Zetex Inc 700 Veterans Memorial Highway Hauppauge, NY 11788 USA Zetex (Asia Ltd) 3701-04 Metroplaza Tower 1 Hing Fong Road, Kwai Fong Hong Kong Zetex Semiconductors plc Zetex Technology Park, Chadderton Oldham, OL9 9LL United Kingdom Telephone: (1) 631 360 2222 Fax: (1) 631 360 8222 [email protected] Telephone: (852) 26100 611 Fax: (852) 24250 494 [email protected] Telephone: (44) 161 622 4444 Fax: (44) 161 622 4446 [email protected] © 2007 Published by Zetex Semiconductors plc Issue 1 - January 2007 © Zetex Semiconductors plc 2007 8 www.zetex.com