ZXTN19100CG 100V NPN low sat medium power transistor in SOT223 Summary BVCEX > 200V BVCEO > 100V BVECO > 5V IC(cont) = 5.5A VCE(sat) < 65mV @ 1A RCE(sat) = 43mΩ PD = 3.0W Complementary part number ZXTP19100CG Description C Packaged in the SOT223 outline this new low saturation NPN transistor offers extremely low on state losses making it ideal for use in DC-DC circuits and various driving and power management functions. B Features • Higher power dissipation SOT223 package • High peak current • Low saturation voltage • Highforward blocking voltage E Applications E • PSU start up switch • Motor drive • Lamp, relay and solenoid drive C C B Ordering information Device ZXTN19100CGTA Reel size (inches) Tape width (mm) Quantity per reel 7 12 1000 Pinout - top view Device marking ZXTN19 100C Issue 1 - February 2008 © Zetex Semiconductors plc 2008 1 www.zetex.com ZXTN19100CG Absolute maximum ratings Parameter Symbol Limit Unit Collector-Base voltage VCBO 200 V Collector-Emitter voltage (forward blocking) VCEX 200 V Collector-Emitter voltage VCEO 100 V Emitter-Collector voltage (reverse blocking) VECX 6 V Emitter-Base voltage VEBO 7 V Continuous Collector current(c) IC 5.5 A Base current IB 1 A Peak pulse current ICM 10 A Power dissipation at TA =25°C(a) PD 1.2 W 9.6 mW/°C 1.6 W 12.8 mW/°C 3.0 W 24 mW/°C 5.3 W 42 mW/°C 10.2 W 81 mW/°C Tj, Tstg -55 to 150 °C Linear derating factor PD Power dissipation at TA =25°C(b) Linear derating factor PD Power dissipation at TA =25°C(c) Linear derating factor PD Power dissipation at TA =25°C(d) Linear derating factor PD Power dissipation at TC =25°C(e) Linear derating factor Operating and storage temperature range Thermal resistance Parameter Symbol Limit Unit Junction to ambient(a) R⍜JA 104 °C/W Junction to ambient(b) R⍜JA 78 °C/W Junction to ambient(c) R⍜JA 42 °C/W Junction to ambient(d) R⍜JA 23.5 °C/W Junction to case(e) R⍜JC 12.3 °C/W NOTES: (a) For a device surface mounted on 15mm x 15mm x 0.6mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions. (b) Mounted on 25mm x 25mm x 0.6mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions. (c) Mounted on 50mm x 50mm x 0.6mm FR4 PCB with high coverage of single sided 2oz copper, in still air conditions. (d) As (c) above measured at t<5seconds. (e) Junction to case (collector tab). Typical. Issue 1 - February 2008 © Zetex Semiconductors plc 2008 2 www.zetex.com ZXTN19100CG Thermal characteristics Issue 1 - February 2008 © Zetex Semiconductors plc 2008 3 www.zetex.com ZXTN19100CG Electrical characteristics (at Tamb = 25°C unless otherwise stated). Parameter Symbol Collector-Base breakdown BVCBO Voltage Collector-Emitter BVCEX breakdown voltage (forward blocking) Min. 200 Typ. 240 200 240 V IC = 100A, RBE < 1kΩ or -1V < VBE < 0.25V Collector-Emitter breakdown voltage Emitter-Collector breakdown voltage (reverse blocking) BVCEO 100 120 V IC = 10mA (*) BVECX 6 8.3 V Emitter-Collector breakdown voltage (reverse blocking) Emitter-Base breakdown voltage Collector-Base cut-off current BVECO 5 8 V IE = 100A, RBC < 1kΩ or 0.25V > VBC > -0.25V IE = 100A BVEBO 7 8.3 V IE = 100A Collector-Emitter cut-off current ICEX Emitter cut-off current Collector-Emitter saturation voltage IEBO VCE(sat) Base-Emitter saturation voltage Base-Emitter turn-on voltage Static forward current transfer ratio Transition frequency fT 150 Input capacitance Cibo 305 400 pF VEB = 0.5V, f = 1MHz(*) Output capacitance Cobo 15.7 25 pF VCB = 10V, f = 1MHz(*) Delay Time Rise time Storage time Fall time t(d) t(r) t(s) t(f) 28.3 23.6 962 133 ns ns ns ns IC = 500mA, VCC = 10V, IB1 = -IB2 = 50mA ICBO Unit V Conditions IC = 100A 50 0.5 nA A 100 nA <1 50 110 245 50 65 140 430 nA mV mV mV VBE(sat) 1005 1100 mV IC = 5.5A, IB = 550mA(*) VBE(on) 950 1050 mV IC = 5.5A, VCE = 2V(*) 300 190 25 500 hFE <1 Max. 200 130 MHz VCB = 200V VCB = 200V, Tamb= 100°C VCE = 200V, RBE < 1kΩ or -1V < VBE < 0.25V VEB = 5.6V IC = 1A, IB = 100mA(*) IC = 1A, IB = 20mA(*) IC = 5.5A, IB = 550mA(*) IC = 100mA, VCE = 2V(*) IC = 1A, VCE = 2V(*) IC = 5.5A, VCE = 2V(*) IC = 50mA, VCE = 10V f = 100MHz NOTES: (*) Measured under pulsed conditions. Pulse width ≤ 300µs; duty cycle ≤ 2%. Issue 1 - February 2008 © Zetex Semiconductors plc 2008 4 www.zetex.com ZXTN19100CG Typical characteristics Issue 1 - February 2008 © Zetex Semiconductors plc 2008 5 www.zetex.com ZXTN19100CG Intentionally left blank Issue 1 - February 2008 © Zetex Semiconductors plc 2008 6 www.zetex.com ZXTN19100CG Package outline - SOT223 Dim. Millimeters Inches Dim. Millimeters Inches Min. Max. Min. Max. Min. Max. Min. Max. A - 1.80 - 0.071 D 6.30 6.70 0.248 0.264 A1 0.02 0.10 0.0008 0.004 e 2.30 BSC 0.0905 BSC A2 1.55 1.65 0.0610 0.0649 e1 4.60 BSC 0.181 BSC b 0.66 0.84 0.026 0.033 E 6.70 7.30 0.264 0.287 b2 2.90 3.10 0.114 0.122 E1 3.30 3.70 0.130 0.146 C 0.23 0.33 0.009 0.013 L 0.90 - 0.355 - Note: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches Issue 1 - February 2008 © Zetex Semiconductors plc 2008 7 www.zetex.com ZXTN19100CG Definitions Product change Zetex Semiconductors reserves the right to alter, without notice, specifications, design, price or conditions of supply of any product or service. Customers are solely responsible for obtaining the latest relevant information before placing orders. Applications disclaimer The circuits in this design/application note are offered as design ideas. It is the responsibility of the user to ensure that the circuit is fit for the user’s application and meets with the user’s requirements. No representation or warranty is given and no liability whatsoever is assumed by Zetex with respect to the accuracy or use of such information, or infringement of patents or other intellectual property rights arising from such use or otherwise. Zetex does not assume any legal responsibility or will not be held legally liable (whether in contract, tort (including negligence), breach of statutory duty, restriction or otherwise) for any damages, loss of profit, business, contract, opportunity or consequential loss in the use of these circuit applications, under any circumstances. Life support Zetex products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Zetex Semiconductors plc. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Reproduction The product specifications contained in this publication are issued to provide outline information only which (unless agreed by the company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned. Terms and Conditions All products are sold subjects to Zetex’ terms and conditions of sale, and this disclaimer (save in the event of a conflict between the two when the terms of the contract shall prevail) according to region, supplied at the time of order acknowledgement. For the latest information on technology, delivery terms and conditions and prices, please contact your nearest Zetex sales office. Quality of product Zetex is an ISO 9001 and TS16949 certified semiconductor manufacturer. To ensure quality of service and products we strongly advise the purchase of parts directly from Zetex Semiconductors or one of our regionally authorized distributors. For a complete listing of authorized distributors please visit: www.zetex.com/salesnetwork Zetex Semiconductors does not warrant or accept any liability whatsoever in respect of any parts purchased through unauthorized sales channels. ESD (Electrostatic discharge) Semiconductor devices are susceptible to damage by ESD. Suitable precautions should be taken when handling and transporting devices. The possible damage to devices depends on the circumstances of the handling and transporting, and the nature of the device. The extent of damage can vary from immediate functional or parametric malfunction to degradation of function or performance in use over time. Devices suspected of being affected should be replaced. Green compliance Zetex Semiconductors is committed to environmental excellence in all aspects of its operations which includes meeting or exceeding regulatory requirements with respect to the use of hazardous substances. Numerous successful programs have been implemented to reduce the use of hazardous substances and/or emissions. All Zetex components are compliant with the RoHS directive, and through this it is supporting its customers in their compliance with WEEE and ELV directives. Product status key: “Preview” Future device intended for production at some point. Samples may be available “Active” Product status recommended for new designs “Last time buy (LTB)” Device will be discontinued and last time buy period and delivery is in effect “Not recommended for new designs” Device is still in production to support existing designs and production “Obsolete” Production has been discontinued Datasheet status key: “Draft version” This term denotes a very early datasheet version and contains highly provisional information, which may change in any manner without notice. “Provisional version” This term denotes a pre-release datasheet. It provides a clear indication of anticipated performance. However, changes to the test conditions and specifications may occur, at any time and without notice. “Issue” This term denotes an issued datasheet containing finalized specifications. However, changes to specifications may occur, at any time and without notice. Zetex sales offices Europe Americas Asia Pacific Corporate Headquarters Zetex GmbH Kustermann-park Balanstraße 59 D-81541 München Germany Telefon: (49) 89 45 49 49 0 Fax: (49) 89 45 49 49 49 [email protected] Zetex Inc 700 Veterans Memorial Highway Hauppauge, NY 11788 USA Zetex (Asia Ltd) 3701-04 Metroplaza Tower 1 Hing Fong Road, Kwai Fong Hong Kong Zetex Semiconductors plc Zetex Technology Park, Chadderton Oldham, OL9 9LL United Kingdom Telephone: (1) 631 360 2222 Fax: (1) 631 360 8222 [email protected] Telephone: (852) 26100 611 Fax: (852) 24250 494 [email protected] Telephone: (44) 161 622 4444 Fax: (44) 161 622 4446 [email protected] © 2008 Published by Zetex Semiconductors plc Issue 1 - February 2008 © Zetex Semiconductors plc 2008 8 www.zetex.com