ZXTN5551G 160V, SOT223, NPN high voltage transistor Summary BVCEO > 160V BVEBO > 6V IC(cont) = 600mA PD = 2W Complementary part number ZXTP5401G Description C A high voltage NPN transistor in a high power dissipation surface mount package B Features • 160V rating • SOT223 package E Applications • E High voltage amplification Ordering information Device C Reel size (inches) Tape width (mm) Quantity per reel ZXTN5551GTA 7 12 1000 ZXTN5551GTC 13 12 4000 C B Pinout - top view Device marking ZXTN 5551 Issue 1 - August 2007 © Zetex Semiconductors plc 2007 1 www.zetex.com ZXTN5551G Absolute maximum ratings Parameter Symbol Limit Unit Collector-base voltage VCBO 180 V Collector-emitter voltage VCEO 160 V Emitter-base voltage VEBO 6 V Continuous collector current(a) IC 600 mA Power dissipation at TA = 25°C(a) PD 2 W 16 mW/°C Tj, Tstg -55 to 150 °C Symbol Value Unit RJA 62.5 °C/W Linear derating factor Operating and storage temperature range Thermal resistance Parameter Junction to ambient(a) NOTES: (a) For a device surface mounted on 50mm x 50mm x 1.6mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions. Issue 1 - August 2007 © Zetex Semiconductors plc 2007 2 www.zetex.com ZXTN5551G Characteristics Issue 1 - August 2007 © Zetex Semiconductors plc 2007 3 www.zetex.com ZXTN5551G Electrical characteristics (at Tamb = 25°C unless otherwise stated). Parameter Symbol Min. Typ. Collector-base breakdown BVCBO voltage 180 270 V IC = 100A Collector-emitter breakdown voltage (base open) BVCEO 160 200 V IC = 1mA (*) Emitter-base breakdown voltage BVEBO 6 7.85 V IE = 10A Collector cut-off current ICBO Collector-emitter saturation voltage VCE(Sat) Base-emitter saturation voltage VBE(Sat) Static forward current transfer ratio hFE Transition frequency fT Output capacitance COBO Small signal hFE <1 Max. Unit Conditions 50 nA VCB = 120V 50 A VCB = 120V, Tamb= 100°C 65 150 mV IC = 10mA, IB = 1mA (*) 115 200 mV IC = 50mA, IB = 5mA (*) 760 1000 mV IC = 10mA, IB = 1mA (*) 840 1200 mV IC = 50mA, IB = 5mA (*) 80 135 80 140 30 65 IC = 1mA, VCE = 5V (*) 250 IC = 50mA, VCE = 5V (*) 130 6 50 IC = 10mA, VCE = 5V (*) MHz IC = 10mA, VCE = 10V f = 100MHz pF VCB = 10V, f = 1MHz (*) 260 IC = 10mA, VCE = 10V, f=1kHz (†) Delay time t(d) 95 ns Rise time t(r) 64 ns Storage time t(s) 1256 ns Fall time t(f) 140 ns VCC = 10V. IC = 10mA, IB1 = IB2= 1mA NOTES: (*) Measured under pulsed conditions. Pulse width 300s; duty cycle 2%. (†) Periodic sample test only. Issue 1 - August 2007 © Zetex Semiconductors plc 2007 4 www.zetex.com ZXTN5551G Typical Characteristics Issue 1 - August 2007 © Zetex Semiconductors plc 2007 5 www.zetex.com Intentionally left blank Issue 1 - August 2007 © Zetex Semiconductors plc 2007 6 www.zetex.com Package outline - SOT223 Dim. Millimeters Inches Dim. Millimeters Inches Min. Max. Min. Max. Min. Max. Min. Max. A - 1.80 - 0.071 D 6.30 6.70 0.248 0.264 A1 0.02 0.10 0.0008 0.004 e 2.30 BSC 0.0905 BSC A2 1.55 1.65 0.0610 0.0649 e1 4.60 BSC 0.181 BSC b 0.66 0.84 0.026 0.033 E 6.70 7.30 0.264 0.287 b2 2.90 3.10 0.114 0.122 E1 3.30 3.70 0.130 0.146 C 0.23 0.33 0.009 0.013 L 0.90 - 0.355 - Note: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches Issue 1 - August 2007 © Zetex Semiconductors plc 2007 7 www.zetex.com ZXTN5551G Definitions Product change Zetex Semiconductors reserves the right to alter, without notice, specifications, design, price or conditions of supply of any product or service. Customers are solely responsible for obtaining the latest relevant information before placing orders. Applications disclaimer The circuits in this design/application note are offered as design ideas. It is the responsibility of the user to ensure that the circuit is fit for the user’s application and meets with the user’s requirements. No representation or warranty is given and no liability whatsoever is assumed by Zetex with respect to the accuracy or use of such information, or infringement of patents or other intellectual property rights arising from such use or otherwise. Zetex does not assume any legal responsibility or will not be held legally liable (whether in contract, tort (including negligence), breach of statutory duty, restriction or otherwise) for any damages, loss of profit, business, contract, opportunity or consequential loss in the use of these circuit applications, under any circumstances. Life support Zetex products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Zetex Semiconductors plc. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Reproduction The product specifications contained in this publication are issued to provide outline information only which (unless agreed by the company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned. Terms and Conditions All products are sold subjects to Zetex’ terms and conditions of sale, and this disclaimer (save in the event of a conflict between the two when the terms of the contract shall prevail) according to region, supplied at the time of order acknowledgement. For the latest information on technology, delivery terms and conditions and prices, please contact your nearest Zetex sales office. Quality of product Zetex is an ISO 9001 and TS16949 certified semiconductor manufacturer. To ensure quality of service and products we strongly advise the purchase of parts directly from Zetex Semiconductors or one of our regionally authorized distributors. For a complete listing of authorized distributors please visit: www.zetex.com/salesnetwork Zetex Semiconductors does not warrant or accept any liability whatsoever in respect of any parts purchased through unauthorized sales channels. ESD (Electrostatic discharge) Semiconductor devices are susceptible to damage by ESD. Suitable precautions should be taken when handling and transporting devices. The possible damage to devices depends on the circumstances of the handling and transporting, and the nature of the device. The extent of damage can vary from immediate functional or parametric malfunction to degradation of function or performance in use over time. Devices suspected of being affected should be replaced. Green compliance Zetex Semiconductors is committed to environmental excellence in all aspects of its operations which includes meeting or exceeding regulatory requirements with respect to the use of hazardous substances. Numerous successful programs have been implemented to reduce the use of hazardous substances and/or emissions. All Zetex components are compliant with the RoHS directive, and through this it is supporting its customers in their compliance with WEEE and ELV directives. Product status key: “Preview” Future device intended for production at some point. Samples may be available “Active” Product status recommended for new designs “Last time buy (LTB)” Device will be discontinued and last time buy period and delivery is in effect “Not recommended for new designs” Device is still in production to support existing designs and production “Obsolete” Production has been discontinued Datasheet status key: “Draft version” This term denotes a very early datasheet version and contains highly provisional information, which may change in any manner without notice. “Provisional version” This term denotes a pre-release datasheet. It provides a clear indication of anticipated performance. However, changes to the test conditions and specifications may occur, at any time and without notice. “Issue” This term denotes an issued datasheet containing finalized specifications. However, changes to specifications may occur, at any time and without notice. Zetex sales offices Europe Americas Asia Pacific Corporate Headquarters Zetex GmbH Kustermann-park Balanstraße 59 D-81541 München Germany Telefon: (49) 89 45 49 49 0 Fax: (49) 89 45 49 49 49 [email protected] Zetex Inc 700 Veterans Memorial Highway Hauppauge, NY 11788 USA Zetex (Asia Ltd) 3701-04 Metroplaza Tower 1 Hing Fong Road, Kwai Fong Hong Kong Zetex Semiconductors plc Zetex Technology Park, Chadderton Oldham, OL9 9LL United Kingdom Telephone: (1) 631 360 2222 Fax: (1) 631 360 8222 [email protected] Telephone: (852) 26100 611 Fax: (852) 24250 494 [email protected] Telephone: (44) 161 622 4444 Fax: (44) 161 622 4446 [email protected] © 2007 Published by Zetex Semiconductors plc Issue 1 - August 2007 © Zetex Semiconductors plc 2007 8 www.zetex.com