DIALIGHT PART NUMBER DIM "A" TERMINAL TYPE COLLAR & FLANGE NUT FINISH 508-7438-504 .865 [21,74] FIG. 1 BLACK ANODIZE 508-7438-604 .865 [21,74] FIG. 1 CLEAR ANODIZE 508-7445-504 .942 [23,92] FIG. 1 BLACK ANODIZE 508-7445-604 .942 [23,92] FIG. 1 CLEAR ANODIZE 508-7538-504 .834 [21,18] FIG. 2 BLACK ANODIZE 508-7538-604 .834 [21,18] FIG. 2 CLEAR ANODIZE 508-7545-504 .920 [23,37] FIG. 2 BLACK ANODIZE 508-7545-604 .920 [23,37] FIG. 2 CLEAR ANODIZE 508-8738-504 .848 [21,54] FIG. 3 BLACK ANODIZE 508-8738-604 .848 [21,54] FIG. 3 CLEAR ANODIZE 508-8745-504 .934 [23,72] FIG. 3 BLACK ANODIZE 508-8745-604 .934 [23,72] FIG. 3 CLEAR ANODIZE REV ECN NO REVISIONS A DRN CKD APP AJF KLJ NEW RELEASE DATE NO 12-20-10 .160 [4,06] ALUMINUM MOUNTING BUSHING BLACK ANODIZE FINISH DIM "A" #.040 [ #1,0] 3/8-32 NEF THREAD HEX NUT BRASS, WHITE NICKEL FINISH INTERNAL TOOTH LOCKWASHER WHITE NICKEL FINISH FIG.2 - SOLDER CUP TERMINALS FLANGE NUT, KNURLED SEE TABLE FOR FINISH COLLAR SEE TABLE FOR FINISH .500 [12,7] .312 [7,92] FIG.3 - TURRET TERMINALS NOTES: 1. DIALIGHT PART NUMBERS: 508-74XX-504, 508-74XX-604, 508-75XX-504, 508-75XX-604, 508-87XX-504 & 508-87XX-604. 2. MAXIMUM PANEL THICKNESS: .156" 3. RECOMMENDED MOUNTING HOLE SIZE: .380 #.002". THIS DRAWING AND THE CONTENTS HEREIN ARE CONFIDENTIAL AND THE SOLE PROPERTY OF DIALIGHT. REPRODUCTION OF THIS DRAWING OR CONSTRUCTION OF ANY PARTS WITHIN THIS DRAWING ARE FORBIDDEN WITHOUT THE WRITTEN CONSENT OF DIALIGHT. SCALE: 4.000 C-17895 TOLERANCES: UNLESS OTHERWISE SPECIFIED FIG.1 - SOLDER BLADE TERMINALS FRACTIONS: #1/64 DECIMALS (.XX): #.01 DECIMALS (.XXX): #.005 DECIMALS (.XXXX): #.0005 ANGLES: #1 $ REV DRAWING NUMBER ALL DIM'S IN: INCHES (MM) TITLE A 508 SERIES DATALAMP HOLDER MATERIAL FINISH: 1501 ROUTE 34 SOUTH FARMINGDALE, NJ 07727 FSCM 83330 SHEET 1 OF 1 FAMILY TABLE: