Document 311 -1 RFID Transponder Coils – 5315TC The 5315TC is Coilcraft’s most rugged and lowest cost antenna coil designed for RFID applications at 125 kHz. The wrap-around terminals have large mounting surfaces to ensure excellent board adhesion. The coil is wound on a plastic base, providing great durability and allowing this part to withstand harsh mechanical shock. Their robust construction and 125°C rating make these parts suitable for use in the most severe environments. They were developed for automotive applications, including tire pressure monitoring systems. In addition to the standard models shown, Coilcraft can design transponder coils to operate at other frequencies. Coilcraft Designer’s Kit C369 contains four samples each of the standard parts shown. To order, contact Coilcraft or visit http://order.coilcraft.com. Inductance2 Read Matching distance3 at 125 kHz Sensitivity4 capacitor5 Part number1 ±2% (mH) Q min2(inches/cm) (mV/µT) (pF) 5315TC-374XGL_ 0.37 8 16 / 40.6 8.32 4380 5315TC-404XGL_ 0.40 8 17 / 43.2 8.67 4050 5315TC-704XGL_ 0.70 12 21 / 53.3 11.43 2320 5315TC-904XGL_ 0.90 12 21 / 53.3 13.35 1800 5315TC-105XGL_ 1.00 12 23 / 58.4 14.07 1600 5315TC-115XGL_ 1.08 13 23 / 58.4 14.65 1500 5315TC-205XGL_ 1.97 14 25 / 63.5 21.28 820 5315TC-245XGL_ 2.38 12 26 / 66.0 23.97 680 5315TC-335XGL_ 3.30 14 27 / 68.6 29.70 490 5315TC-415XGL_ 4.15 15 29 / 73.7 34.95 390 5315TC-495XGL_ 4.90 15 28 / 71.1 40.00 330 5315TC-685XGL_ 6.80 13 30 / 76.2 53.87 240 5315TC-715XGL_ 7.10 14 30 / 76.2 55.41 220 5315TC-725XGL_ 7.20 17 30 / 76.2 56.74 220 1. When ordering, please specify packaging code: 5315TC-715XGLD Packaging:D=13″ machine-ready reel. EIA-481 embossed plastic tape (3000 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance and Q measured using Agilent/HP 4192A impedance analyzer at 125 kHz. For recommended test procedures, contact Coilcraft. 3. Read distance measured using the KEELOQ® Transponder Evaluation Kit part number DM303005 from Microchip. Distance was recorded as the voltage across the resonant circuit dropped below 10 mV. DCR max6 (Ohms) 24 25 33 38 40 40 70 80 95 103 150 180 176 165 SRF typ7 (kHz) 7100 7300 4500 3800 2500 2300 2300 2400 1800 1260 1550 1350 890 880 4. Sensitivity measured in accordance with Coilcraft application note “Measuring Sensitivity of Transponder Coils.” 5. Matching capacitor value required for parallel resonant circuit operating at 125 kHz. 6. DCR measured on micro-ohmmeter. 7. SRF measured using Agilent/HP 8753D network analyzer. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 311-1 Revised 02/19/09 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 311-2 RFID Transponder Coils – 5315TC Dimensions Typical L vs Frequency 14 0.536 13,61 Inductance (mH) 12 10 XXX 0.15 3,81 -725 0.10 ±0.002 2,54 ±0,05 8 -415 0.089 max 2,26 6 4 0.10 2,54 -115 -404 2 0.33 8,38 Unless specified, tolerance is ±0.010 (±0,25). 0.56 14,22 0 10 100 1000 0.12 3,05 10000 Frequency (kHz) Recommended Land Pattern 0.16 4,06 Terminations RoHS compliant gold over nickel over phos bronze. Weight 260 – 300 mg Ambient temperature –40°C to +125°C Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Temperature coefficient of inductance +300 to +1100 ppm/°C Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 3000 per 13″ reel Plastic tape: 24 mm wide, 0.3 mm thick, 8 mm pocket spacing, 2.74 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. Dimensions are in 0.32 8,13 inches mm US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 311-2 Revised 02/19/09 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.