MICROCIRCUIT DATA SHEET Original Creation Date: 01/05/98 Last Update Date: 03/09/99 Last Major Revision Date: 01/05/98 MV54ACT175-X REV 0A0 Quad D Flip-Flop General Description The 54ACT175 is a high-speed quad D flip-flop. The device is useful for general flip-flop requirements where clock and clear inputs are common. The information on the D inputs is stored during the LOW-to-HIGH clock transition. Both true and complemented outputs of each flip-flop are provided. A Master Reset input resets all flip-flops, independent of the Clock or D inputs, when LOW. Industry Part Number NS Part Numbers 54ACT175 54ACT175E-QMLV* 54ACT175J-QMLV** 54ACT175W-QMLV*** Prime Die J175 Controlling Document 5962-89693 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 C +125 C -55 C +25 C +125 C -55 C +25 C +125 C -55 C +25 C +125 C -55 C MICROCIRCUIT DATA SHEET MV54ACT175-X REV 0A0 Features - Edge-triggered D-type inputs Buffered positive edge-triggered clock Asynchronous common reset True and complement output Outputs source/sink 24 mA ACT175 has TTL-compatible inputs Standard Military Drawing (SMD) - ACT175: 5962-8969301V2A*, VEA**, VFA*** 2 MICROCIRCUIT DATA SHEET MV54ACT175-X REV 0A0 (Absolute Maximum Ratings) (Note 1) Supply Voltage (Vcc) -0.5V to +7.0V DC Input Vi = Vi = DC Input Diode Current (Iik) -0.5V Vcc +0.5V Voltage (Vi) -20 mA +20 mA -0.5V to Vcc +0.5V DC Output Diode Current (Iok) Vo = -0.5V Vo = Vcc +0.5V DC Output Voltage (Vo) -20 mA +20 mA -0.5V to Vcc +0.5V DC Output Source or Sink Current (Io) +50 mA DC Vcc or Ground Current per Output Pin (Icc or Ignd) +50 mA Storage Temperature (Tstg) -65 C to +150 C Junction Temperature (Tj) CDIP Thermal Resistance, junction-to-case 175 C See Mil-Std-1835 Maximum Power Dissipation (pd) 500 mW Lead Temperature soldering, 10 seconds +300C Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACT TM circuits outside databook specifications. Recommended Operating Conditions Supply Voltage (Vcc) 4.5V to 5.5V Input Voltage (Vi) 0V to Vcc Output Voltage (Vo) 0V to Vcc Operating Temperature (Ta) -55 C to +125 C Minimum ACT Vin Vcc Input Edge Rate (Delta V/Delta t) Devices from 0.8V to 2.0V @ 4.5V, 5.5V 125 mV/ns 3 MICROCIRCUIT DATA SHEET MV54ACT175-X REV 0A0 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. SYMBOL IIH IIL VOL PARAMETER High Level Input Current Low Level Input Current Low Level Output Voltage CONDITIONS NOTES VCC=5.5V, VM=5.5V PINNAME MIN MAX UNIT SUBGROUPS 1, 2 INPUT 0.1 uA 1 1, 2 INPUT 1.0 uA 2, 3 1, 2 INPUT -0.1 uA 1 1, 2 INPUT -1.0 uA 2, 3 VCC=4.5V, IOL=50.0uA, VIL=0.8V, VIH=2.0V 1, 2 OUTPUT .10 V 1, 2, 3 VCC=5.5V, IOL=50.0uA, VIL=0.8V, VIH=2.0V 1, 2 OUTPUT .10 V 1, 2, 3 VCC=4.5V, IOL=24.0mA, VIL=0.8V, VIH=2.0V 1, 2 OUTPUT .36 V 1 1, 2 OUTPUT .50 V 2, 3 1, 2 OUTPUT .36 V 1 1, 2 OUTPUT .50 V 2, 3 1.65 V 1, 2, 3 VCC=5.5V, VM=0.0V VCC=5.5V, IOL=24.0mA, VIL=0.8V, VIH=2.0V VIOL Dynamic output current LOW VCC=5.5V, VIL=0.8V, VIH=2.0V, IOL=50.0mA 1, OUTPUT 2, 5 VOH High Level Output Voltage VCC=4.5V, VIL=0.8V, VIH=2.0V, IOH=-50.0uA 1, 2 OUTPUT 4.40 V 1, 2, 3 VCC=5.5V, VIL=0.8V, VIH=2.0V, IOH=-50.0uA 1, 2 OUTPUT 5.40 V 1, 2, 3 VCC=4.5V, VIL=0.8V, VIH=2.0V, IOH=-24.0mA 1, 2 OUTPUT 3.86 V 1 1, 2 OUTPUT 3.70 V 2, 3 1, 2 OUTPUT 4.86 V 1 1, 2 OUTPUT 4.70 V 2, 3 3.85 V 1, 2, 3 VCC=5.5V, VIL=0.8V, VIH=2.0V, IOH=-24.0mA VIOH Dynamic output current HIGH VCC=5.5V, VIL=0.8V, VIH=2.0V, IOH=-50.0mA 1, OUTPUT 2, 5 ICCH Supply Current Outputs HIGH VCC=5.5V 1, 2 VCC 100 nA 1 1, 2 VCC 160 uA 2, 3 1, 2 VCC 100 nA 1 1, 2 VCC 160 uA 2, 3 1, 2 VCC 100 nA 1 1, 2 VCC 160 uA 2, 3 1, 2 VCC 1.0 mA 1 1, 2 VCC 1.6 mA 2, 3 -1.50 V 1 ICCL ICCF ICCT VIC- Supply Current Outputs LOW Supply Current Functional Supply Current per Input Negative Input Clamp Voltage VCC=5.5V VCC=5.5V VCC=5.5V, VIHT=VCC-2.1V VCC=Open, IM=-1.0mA 8, 9 INPUT 4 -0.40 MICROCIRCUIT DATA SHEET MV54ACT175-X REV 0A0 Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. SYMBOL VIC+ PARAMETER Positive Input Clamp Voltage CONDITIONS NOTES VCC=0.0V, IM=1.0mA PINNAME 8, 9 INPUT 5 MIN 0.40 MAX 1.5 UNIT V SUBGROUPS 1 MICROCIRCUIT DATA SHEET MV54ACT175-X REV 0A0 Electrical Characteristics AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pF, RL=500 OHMS, TRISE/TFALL=3.0ns, Temp Range: -55C to 125C. SYMBOL PARAMETER tpLH(1) CONDITIONS Propagation Delay tpHL(1) Propagation Delay tpLH(2) Propagation Delay tpHL(2) Propagation Delay ts(H/L) Setup Time HIGH or LOW NOTES VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V PINNAME MIN MAX UNIT SUBGROUPS 3, CP to 4, 7 Qn or Qn 1.5 10.0 ns 9 3, CP to 4, 7 Qn or Qn 1.5 11.5 ns 10, 11 3, CP to 4, 7 Qn or Qn 1.5 10.0 ns 9 3, CP to 4, 7 Qn or Qn 1.5 12.5 ns 10, 11 3, MR to 4, 7 Qn or Qn 1.5 9.5 ns 9 3, MR to 4, 7 Qn or Qn 1.5 11.5 ns 10, 11 3, MR to 4, 7 Qn or Qn 1.5 9.5 ns 9 3, MR to 4, 7 Qn or Qn 1.5 11.0 ns 10, 11 6 Dn to CP 3.0 ns 9 6 Dn to CP 3.5 ns 10, 11 th(H/L) Setup Time HIGH or LOW VCC=4.5V 6 Dn to CP 1.5 ns 9, 10, 11 tw(H/L)(1) Pulse Width or LOW VCC=4.5V 6 CP 5.0 ns 9, 10, 11 tw(L)(2) MR Pulse Width LOW VCC=4.5V 6 MR 5.0 ns 9, 10, 11 tREC Recovery Time VCC=4.5V 6 MR to CP 1.0 ns 9 6 MR to CP 1.5 ns 10, 11 95 ns 9, 10, 11 fMAX HIGH Maximum Clock Frequency Note 1: Note 2: Note 3: VCC=4.5V 6 SCREEN TESTED 100% ON EACH DEVICE AT +25C & +125C TEMPERATURE, SUBGROUPS 1, 2, 7, & 8. SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C, +125C, & -55C TEMPERATURE, SUBGROUPS A1, 2, 3, 7, & 8. SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY, SUBGROUP A9. 6 MICROCIRCUIT DATA SHEET MV54ACT175-X REV 0A0 (Continued) Note 4: Note Note Note Note Note 5: 6: 7: 8: 9: SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C, +125C, & -55C TEMPERATURE, SUBGROUPS A9, 10 & 11. TRANSMISSION LINE DRIVING TEST, GUARDBAND LIMITS SET FOR +25C, 2 MSEC DURATION MAX. GUARANTEED BUT NOT TESTED. (DESIGN CHARACTERIZATION DATA) MIN LIMITS GUARANTEED FOR 5.5V BY GUARDBANDING 4.5V MINIMUM LIMITS. SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY, SUBGROUP A1. SAMPLE TESTED (METHOD 5005, TABLE 1) AT +25C TEMPERATURE ONLY, SUBGROUP A1. 7