MICROCIRCUIT DATA SHEET Original Creation Date: 07/03/96 Last Update Date: 01/21/00 Last Major Revision Date: 01/06/00 MN54ACT573-X REV 3A0 Octal D-Type Latch With TRI-State Outputs General Description The ACT573 is a high speed octal latch with buffered common Latch Enable (LE) and buffered common Output Enable (OE) inputs. This device is functionally identical to the ACT373 but has inputs and outputs on opposite sides. Industry Part Number NS Part Numbers 54ACT573 54ACT573DMQB* 54ACT573DMQB-RH* 54ACT573FMQB** 54ACT573FMQB-RH** 54ACT573LMQB*** 54ACT573LMQB-RH*** Prime Die J573 Controlling Document 5962-87664 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 C +125 C -55 C +25 C +125 C -55 C +25 C +125 C -55 C +25 C +125 C -55 C MICROCIRCUIT DATA SHEET MN54ACT573-X REV 3A0 Features - Icc and Ioz reduced by 50% Inputs and outputs on opposite sides of package allowing easy interface with microprocessors. Useful as input or output port for microprocessors Functionally identical to ACT373 TRI-STATE outputs for bus interfacing Outputs source/sink 24 mA ACT573 has TTL-compatible inputs Standard Military Drawing (SMD) - ACT573: 5962-8766401RA*, SA**, 2A*** - ACT573: 5962R8766401RA*, SA**, 2A*** 2 MICROCIRCUIT DATA SHEET MN54ACT573-X REV 3A0 (Absolute Maximum Ratings) (Note 1) Supply Voltage (Vcc) -0.5V to +7.0V DC Input Vi = Vi = DC Input Diode Current (Iik) -0.5V Vcc +0.5V Voltage (Vi) -20 mA +20 mA -0.5V to Vcc +0.5V DC Output Diode Current (Iok) Vo = -0.5V Vo = Vcc +0.5V DC Output Voltage (Vo) -20 mA +20 mA -0.5V to Vcc +0.5V DC Output Source or Sink Current (Io) +50 mA DC Vcc or Ground Current per Output Pin (Icc or Ignd) +50 mA Storage Temperature (Tstg) -65 C to +150 C Junction Temperature (Tj) CDIP Note 1: 175 C Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACT TM circuits outside databook specifications. Recommended Operating Conditions Supply Voltage (Vcc) 4.5V to 5.5V Input Voltage (Vi) 0V to Vcc Output Voltage (Vo) 0V to Vcc Operating Temperature (Ta) -55 C to + 125 C Minimum ACT Vin Vcc Input Edge Rate (Delta V/ Delta t) Devices from 0.8V to 2.0V @ 4.5V, 5.5V 125 mV/ns 3 MICROCIRCUIT DATA SHEET MN54ACT573-X REV 3A0 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED BUT NOT TESTED. SYMBOL IIH IIL VOL PARAMETER High Level Input Current Low Level Input Current Low Level Output Voltage CONDITIONS NOTES VCC=5.5V, VM=5.5V PINNAME MIN MAX UNIT SUBGROUPS 1, 2 INPUT 0.1 uA 1 1, 2 INPUT 1.0 uA 2, 3 1, 2 INPUT -0.1 uA 1 1, 2 INPUT -1.0 uA 2, 3 VCC=4.5V, VIL=0.8V, VIH=2.0V, IOL=50.0uA 1, 2 OUTPUT .10 V 1, 2, 3 VCC=5.5V, VIL=0.8V, VIH=2.0V, IOL=50.0uA 1, 2 OUTPUT .10 V 1, 2, 3 VCC=4.5V, VIL=0.8V, VIH=2.0V, IOL=24.0mA 1, 2 OUTPUT .36 V 1 1, 2 OUTPUT .50 V 2, 3 1, 2 OUTPUT .36 V 1 1, 2 OUTPUT .50 V 2, 3 1.65 V 1, 2, 3 VCC=5.5V, VM=0.0V VCC=5.5V, VIL=0.8V, VIH=2.0V, IOL=24.0mA VIOL Dynamic output current Low VCC=5.5V, VIL=0.8V, VIH=2.0V, IOL=50.0mA 1, OUTPUT 2, 5 VOH High Level Output Voltage VCC=4.5V, VIL=0.8V, VIH=2.0V, IOH=-50.0uA 1, 2 OUTPUT 4.40 V 1, 2, 3 VCC=5.5V, VIL=0.8V, VIH=2.0V, IOH=-50.0uA 1, 2 OUTPUT 5.40 V 1, 2, 3 VCC=5.5V, VIL=0.8V, VIH=2.0V, IOH=-24.0mA 1, 2 OUTPUT 4.86 V 1 1, 2 OUTPUT 4.70 V 2, 3 1, 2 OUTPUT 3.86 V 1 1, 2 OUTPUT 3.70 V 2, 3 3.85 V 1, 2, 3 VCC=4.5V, VIL=0.8V, VIH=2.0V, IOH=-24.0mA VIOH Dynamic output current High VCC=5.5V, VIL=0.8V, VIH=2.0V, IOH=-50.0mA 1, OUTPUT 2, 5 IOZH Maximum TRI-STATE VCC=4.5V, VIH=2.0V, VM=4.5V 1, 2 OUTPUT 0.25 uA 1 1, 2 OUTPUT 5.0 uA 2, 3 1, 2 OUTPUT 0.25 uA 1 1, 2 OUTPUT 5.0 uA 2, 3 1, 2 OUTPUT -0.25 uA 1 1, 2 OUTPUT -5.0 uA 2, 3 1, 2 OUTPUT -0.25 uA 1 1, 2 OUTPUT -5.0V uA 2, 3 VCC=5.5V, VIH=2.0V, VM=5.5V IOZL Maximum TRI-STATE VCC=4.5V, VIH=2.0V, VM=0.0V VCC=5.5V, VIH=2.0V, VM=0.0V 4 MICROCIRCUIT DATA SHEET MN54ACT573-X REV 3A0 Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED BUT NOT TESTED. SYMBOL ICCH ICCL ICCZ ICCT PARAMETER Supply Current Outputs HIGH Supply Current Outputs LOW Supply Current Outputs Tri-State Supply Current per Input CONDITIONS NOTES VCC=5.5V VCC=5.5V VCC=5.5V VCC=5.5V, VIHT=VCC-2.1V 5 PINNAME MIN MAX UNIT SUBGROUPS 1, 2 VCC 4.0 uA 1 1, 2 VCC 80 uA 2, 3 1, 2 VCC 4.0 uA 1 1, 2 VCC 80 uA 2, 3 1, 2 VCC 4.0 uA 1 1, 2 VCC 80 uA 2, 3 1, 2 VCC 1.0 mA 1 1, 2 VCC 1.6 mA 2, 3 MICROCIRCUIT DATA SHEET MN54ACT573-X REV 3A0 Electrical Characteristics AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pF, RL=500 OHMS, TR/TF=3.0nS, Temp range: -55C to +125C. NOTE: -55C TEMPERATURE, SUBGROUP 11 IS GUARANTEED BUT NOT TESTED. SYMBOL tpLH(1) tpHL(1) tpLH(2) tpHL(2) tpZH tpZL tpHZ tpLZ ts(H/L) th(H/L) PARAMETER Propagation Delay Propagation Delay Propagation Delay Propagation Delay Output Enable Time Output Enable Time Output Disable Time Output Disable Time Setup Time HIGH or LOW Hold Time HIGH or LOW CONDITIONS NOTES VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V 6 PINNAME MIN MAX UNIT SUBGROUPS 3, Dn to 4, 7 On 1.5 10.5 ns 9 3, Dn to 4, 7 On 1.5 13.5 ns 10, 11 3, Dn to 4, 7 On 1.5 10.5 ns 9 3, Dn to 4, 7 On 1.5 13.5 ns 10, 11 3, Le to 4, 7 On 1.5 10.5 ns 9 3, Le to 4, 7 On 1.5 13.0 ns 10, 11 3, Le to 4, 7 On 1.5 9.5 ns 9 3, Le to 4, 7 On 1.5 12.0 ns 10, 11 3, OE to 4, 7 On 1.5 10.0 ns 9 3, OE to 4, 7 On 1.5 11.5 ns 10, 11 3, OE to 4, 7 On 1.5 9.5 ns 9 3, OE to 4, 7 On 1.5 11.0 ns 10, 11 3, OE to 4, 7 On 1.5 11.0 ns 9 3, OE to 4, 7 On 1.5 13.5 ns 10, 11 3, OE to 4, 7 On 1.5 8.5 ns 9 3, OE to 4, 7 On 1.5 10.5 ns 10, 11 6 Dn to LE 4.0 ns 9 6 Dn to LE 4.5 ns 10, 11 6 Dn to LE 0.5 ns 9 6 Dn to LE 1.0 ns 10, 11 MICROCIRCUIT DATA SHEET MN54ACT573-X REV 3A0 Electrical Characteristics AC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pF, RL=500 OHMS, TR/TF=3.0nS, Temp range: -55C to +125C. NOTE: -55C TEMPERATURE, SUBGROUP 11 IS GUARANTEED BUT NOT TESTED. SYMBOL tw(H) PARAMETER Pulse Width CONDITIONS NOTES VCC=4.5V 6 PINNAME LE Pulse Width MIN MAX 5.0 UNIT SUBGROUPS ns 9, 10, 11 GROUP E POST IRRADIATION PARAMETRIC LIMITS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: The 100K RAD (Si) dose level includes a post irradiation 168 hour, 25 deg C biased anneal. AC subgroups 1, 7 and 9 electricals must be met with the following exceptions: ICCH Supply Current Outputs High Dose Level = 3K RAD (Si), VINL=0.0V, VINH=5.5V VCC 100 uA 1 VCC=5.5V, VCC 1.0 mA 1 Dose Level = 30K, 50K, 100K RAD (Si), VCC=5.5V, VINL=0.0V, VINH=5.5V VCC 3.5 mA 1 Dose Level = 3K RAD (Si), VINL=0.0V, VINH=5.5V VCC 100 uA 1 VCC=5.5V, VCC 1.0 mA 1 Dose Level = 30K, 50K, 100K RAD (Si), VCC=5.5V, VINL=0.0V, VINH=5.5V VCC 3.5 mA 1 Dose Level = 3K RAD (Si), VINL=0.0V, VINH=5.5V VCC 100 uA 1 VCC=5.5V, VCC 1.0 mA 1 Dose Level = 30K, 50K, 100K RAD (Si), VCC=5.5V, VINL=0.0V, VINH=5.5V VCC 3.5 mA 1 Dose Level = 3K, 10K RAD (Si), VCC=5.5V, VINL=0.0V, VIHT=VCC-2.1V VCC 1.6 mA 1 Dose Level = 30K, 50K, 100K RAD (Si), VCC=5.5V, VINL=0.0V, VIHT=VCC-2.1V VCC 3.5 mA 1 Dose Level = 3K, 10K, 30K, 50K, 100K RAD (Si), VCC=4.5V, VINL=0.0V, VINH=4.5V, VIH=2.0V, VM=4.5V OUTPUTS 25 uA 1 Dose Level = 3K, 10K, 30K, 50K, 100K RAD (Si), VCC=5.5V, VINL=0.0V, VINH=5.5V, VIH=2.0V, VM=5.5V OUTPUTS 25 uA 1 Dose Level = 3K, 10K, 30K, 50K, 100K RAD (Si), VCC=4.5V, VINL=0.0V, VINH=4.5V, VIH=2.0V, VM=0.0V OUTPUTS -25 uA 1 Dose Level = 3K, 10K, 30K, 50K, 100K RAD (Si), VCC=5.5V, VINL=0.0V, VINH=5.5V, VIH=2.0V, VM=0.0V OUTPUTS -25 uA 1 Dose Level = 10K RAD (Si), VINL=0.0V, VINH=5.5V ICCL Supply Current Outputs Low Dose Level = 10K RAD (Si), VINL=0.0V, VINH=5.5V ICCZ Supply Current Outputs Tristated Dose Level = 10K RAD (Si), VINL=0.0V, VINH=5.5V ICCT IOZH IOZL Supply Current Per Input Maximum Tri-state Leakage Current Maximum Tri-state Leakage Current 7 VCC=5.5V, All DC and VCC=5.5V, VCC=5.5V, MICROCIRCUIT DATA SHEET MN54ACT573-X REV 3A0 Note 1: Note 2: Note 3: Note 4: Note 5: Note 6: Note 7: SCREEN TESTED 100% ON EACH DEVICE AT +25C & +125C TEMPERATURE, SUBGROUPS 1, 2, 7, & 8. SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE, SUBGROUPS A1, 2, 7, & 8. SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY, SUBGROUP A9. SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE, SUBGROUPS A9 & 10. TRANSMISSION LINE DRIVING TEST, GUARDBAND LIMITS SET FOR +25C, 2 MSEC DURATION MAX. GUARANTEED BUT NOT TESTED (DESIGN CHARACTERIZATION DATA). +25C & +125C MIN LIMITS GUARANTEED FOR 5.5V BY GUARDBANDING 4.5V MINIMUM LIMITS. 8 MICROCIRCUIT DATA SHEET MN54ACT573-X REV 3A0 Revision History Rev ECN # Originator Changes 2A0 M0003306 01/21/00 Rel Date Linda Collins Changed the tpLH room temp limit from 10.0nS to 10.5nS. 3A0 M0003618 01/21/00 Donald B. Miller 1) Added the RH ordering codes. 2) Added the Group E post irradiation parametric limits 9