The 5682K is a high power triode suitable for industrial and broadcast applications as well as other applications where a 120 kW water cooled anode is desirable. The 5682K uses ceramic as the vacuum envelope for ruggedness and high reliability. At reduced ratings the 5682K is useful up to 88 MHz. Class of Operation AB1 Characteristics Plate Dissipation (Max.) Screen Dissipation (Max.) Grid Dissipation (Max.) Frequency for Max. rating (CW) Amplification Factor Filament/Cathode Voltage Current Capacitance Input Output Feedthrough (Max.) Capacitance Input Output Feedthrough Cooling Base Air Socket Air Chimney Boiler Length Diameter Weight Maximum Ratings Type of Service Plate Voltage (Volts) Plate Current (Amps) RF linear amplifier 8,000 2.0 pf pf pf Water and Forced Air Special N/A N/A N/A 23.25 in; 59.6 cm 8.031 in; 20.4 cm 50lb; 22.68 kg T ypical Operation Plate Screen Voltage Voltage (Volts) (Volts) 6,000 120,000 Watts N/A 2000 Watts 30 MHz 30 Thoriated Tungsten 16.5 Volts 325 Amps Grounded Cathode 111 pf 85 pf 3.0 pf 750 Plate Current (Amps) 1.74 Drive Output Power Power (Watts) (kiloWatts) 200 6.275 The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, Eimac Operation, 607 Hansen Way, Palo Alto, CA 94303 telephone : 1(800) 414-8823. fax : (650) 592-9988 | email : [email protected] CPI | 5682K CPI | 4CW50,000J 5682K