3mm LED CBI® Circuit Board Indicator High Density Narrow Bi-Level 3.26 [.130] 3.81 [.150] 1.63 [.065] POS. 1 PART NO. 569-0111-100 569-0112-200 569-0113-300 569-0117-700 569-0118-800 14.73 [.580] 8.89 4.57 [.350] [.180] TOP LED 2.29 [.090] POS. 2 569-011x-x00 3.68 ±.25 90° TYP [.145 ±.010] COLOR* Red Green Yellow Orange Blue³ NEW * Top - Bottom LED Features .46 SQ NOM TYP [.018] 6.10 [.240] 2.54 [.100] 2.54 [.100] 2.54 ±.05 [.100 ±.002] ANODE (+) LEAD 2.54 [.100] • Multiple CBIs form horizontal LED arrays on 3.35mm (0.132”) center-lines • High Contrast, UL 94 V-0 rated, black housing Ø 1.02 ±.05 [.040 ±.002] TYP (8) 2.54 ±.05 [.100 ±.002] • Oxygen index: 32% 2.54 ±.05 [.100 ±.002] • Polymer content: PBT, 0.446 g • Housing stand-offs facilitate PCB cleaning • Solderability per MIL-STD-202F, method 208F • LEDs are safe for direct viewing per IEC 825-1, EN-60825-1 Tolerance note: As noted, otherwise: • Compatible with: • LED Protrusion: ±0.04 mm [±0.016] • CBI Housing: ±0.02mm[±0.008] 569-010x-xxx Dual Bi-Level Custom Combinations • Contact factory for information on custom color combinations Typical Operating Characteristics (TA=25°C) See LED data sheet for additional information Part Number Color Peak Wavelength nm IV mcd VF Volts Test Current (mA) Viewing Angle 2Θ Θ½ LED Data sheet Page # 569-0111-100 569-0112-200 569-0113-300 569-0117-700 569-0118-800 Red Green Yellow Orange Blue 635 565 585 600 428 10 12.6 10 7 12 2* 2.1* 2.1* 2.2 3.5 10 10 10 10 10 60° 60° 60° 60° 70° 521-9216 521-9210 521-9211 521-9498 521-9831 4-58 4-58 4-58 4-58 4-57 * I =20mA F PART NUMBER ORDERING CODE Series LED Type Pos. 1 Color 5 6 9 - 0 1 1 x - x 0 0 Housing Type Pos. 2 Color ³ ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES Color = 0) Blank 1) Red 2) Green 3) Yellow 7) Orange 8) Blue 4-36 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com NEW 3mm Discrete LED Tinted, Diffused 521-9831 PART NO. SURFACE NOT FLAT 4.8 [.189] 4.4 [.173] 0.7 [.028] 0.4 [.016] 4.8 [.189] 4.4 [.173] 521-9831 0.6 [.024] 0.4 [.016] 2.9 [.114] ø 2.7 [.106] COLOR Blue³ 3.4 [.134] 3.1 [.122] 2.54 [.100] CATHODE 3.7 [.145] 3.5 [.138] 6.1 [.240] 5.7 [.224] 1.8 [.071] 1.2 [.047] 0.6 [.024] 0.4 [.016] 29 [1.142] 27 [1.063] MOUNTING CLIP: 515-0006 located on page 4-65 Dimensions in mm [inches] ATTENTION ³ OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES 4 Blue -9831 ABSOLUTE MAXIMUM RATINGS (TA=25°C) Power Dissipation (mW) 100 Forward Current (mA) Derating (mA/°C) From 55°C 20 .44 Operating Temperature (°C) -40/+100 Storage Temperature (°C) -40/+100 Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Solder Adherence per MIL-STD-202E, Method 208C Blue OPERATING CHARACTERISTICS (TA=25°C) Luminous Intensity (mcd) IF=10mA -9831 Min. Typical 6.3 12 Peak Wavelength (nm) λ Peak Typical 428 Viewing Angle (2Θ½) Typical 70° Forward Voltage (V) IF=10mA Typical Max. 3.5 4.2 Reverse Voltage (V) IR=10µA Min. 3 Θ is the off axis angle at which the luminous intensity is half the axial luminous intensity Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 4-57 3mm Discrete LED High Efficiency Diffused 521-9210, 4.45 [.175] 25.4 [1.0] MIN PART NO. COLOR 521-9210 Green 521-9211 Yellow 521-9216 Red 521-9498 Orange 521-9636 Red 3.30 [.13] 1.02 [.040] MIN 1.02 [.040] -9211, -9216, -9498, -9636 NEW 2.54 [.100] 3.00 [.118] 1.50 [.059] MAX 6.00 [.236] MOUNTING CLIP: 515-0006 located on page 4-65 .40 [.016] .45 [.016 ] short lead cathode all colors except 521-9636 Red. For 521-9636 Red, short lead is anode. Dimensions in mm [inches] Green Yellow Red Orange Red -9210 -9211 -9216 -9498 -9636 100 60 100 135 100 30 .4 20 .25 30 .4 25 .5 40 .51 Operating Temperature (°C) -55/+100 -55/+100 -55/+100 -55/+100 -55/+100 Storage Temperature (°C) -55/+100 -55/+100 -55/+100 -55/+100 -55/+100 ABSOLUTE MAXIMUM RATINGS (TA=25°C) Power Dissipation (mW) Forward Current (mA) Derating (mA/°C) From 50°C 1 from 25°C Soldering Temperature 260°C, 5 seconds, 1.6 mm from body Solder Adherence per MIL-STD-202E, Method 208C Green Yellow Red Orange Red OPERATING CHARACTERISTICS (TA=25°C) -9210 -9211 -9216 -9498 -9636 Luminous Intensity (mcd) IF=10mA 1 IF=20mA Min. Typical 4.7 12.6 7.4 10 7.4 10 3.4 7 8.71 481 Peak Wavelength (nm) λ Peak Typical 565 585 635 600 660 Viewing Angle (2Θ ½) Typical 60° 60° 60° 60° 60° Forward Voltage (V) IF=10mA 1 IF=20mA Typical Max. 2.11 2.81 2.11 2.81 21 2.81 2.2 3 1.81 2.41 Reverse Voltage (V), IR=100µA Max. 5 5 5 5 4 Θ is the off axis angle at which the luminous intensity is half the axial luminous intensity 4-58 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com