5BAF Series Differential Fixed Frequency Filters Lowpass & Highpass Description The 5BAF Series are differential-input low-pass and high-pass filters that are pin-out and package compatible with industry-standard 5B Series signal conditioning modules. Each filter comes factory tuned to a user specified corner or center frequency from 1 Hz to 100 kHz. These filters are ideally suited to sharply limit A/D converter bandwidth to eliminate unwanted signals and noise. To serve real-world applications, all 5BAF Series filters are configured with a differential input having a common mode rejection ratio of <-70 dB (min.) at 1 kHz. A self contained dc-to-dc converter enables the 5BAF filters to operate from a non-critical +5, ±10% volt power source, key in many systems since +5V logic power is readily available. Features/Benefits: • The 10 volt input range with overall gain of 1 provides an excellent match to both the transducer output and the data acquisition board input. • 5BAF modules allow for partitioning between system segments providing a means to minimize ground loops. • 5B plug-in compatible provides quick and easy insertion. • Factory tuned, no external clocks or adjustments needed. • Broad range of corner or center frequencies to meet a wide range of applications. Available Low-Pass Models: . . . . . . . . . . . . . .Page 5BAF-LPBE8 8-Pole Bessel . . . . . . . . . . . . . . .2 5BAF-LPBU8 8-Pole Butterworth . . . . . . . . . . . .2 5BAF-LPBE6 6-Pole Bessel . . . . . . . . . . . . . . .2 5BAF-LPBU6 6-Pole Butterworth . . . . . . . . . . . .2 5BAF-LPBE4 4-Pole Bessel . . . . . . . . . . . . . . .3 5BAF-LPBU4 4-Pole Butterworth . . . . . . . . . . . .3 Available High-Pass Models: 5BAF-HPBU8 8-Pole Butterworth . . . . . . . . . . . .4 5BAF-HPBU6 6-Pole Butterworth . . . . . . . . . . . .4 5BAF-HPBU4 4-Pole Butterworth . . . . . . . . . . . .4 Applications • Vibration analysis • Industrial and process control General Specifications: Pin-Out/Package Data/Order Information . . . . . .5 • Noise reduction • Signal reduction • Test systems Note: Contact factory for lower frequency, noise or distortion options. 1 1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176 e-mail: [email protected] • Web Address: http://www.freqdev.com 5BAF Series Fixed Frequency 1 Hz to 100 kHz Low-Pass Butterworth Model 5BAF-LPBU8 5BAF-LPBU6 5BAF-LPBU4 Transfer Function 8-Pole Butterworth 6-Pole Butterworth 4-Pole Butterworth Size Std. 5B Std. 5B Std. 5B Range fc 1.00 Hz to 100 kHz 1.00 Hz to 100 kHz 1.00 Hz to 100 kHz Theoretical Transfer Characteristics Appendix A Page 9 Appendix A Page 8 Appendix A Page 7 0.0 dB 0.0 dB 0.0 dB (non-inverting) 0 ± 0.1 dB typ 0 ± 0.1 dB typ 0 ± 0.1 dB typ. Differential Gain 1 ± 0.3% 1 ± 0.3% 1 ± 0.3% Stopband Attenuation Rate 48 dB/octave 36 dB/octave 24 dB/octave Accuracy fc ± 2% max. ± 2% max. ± 2% max. Phase -360° -270° -180° Product Specifications Passband Ripple (theoretical) DC Voltage Gain Filter Attenuation (theoretical) 0.12 dB 3.01 dB 60.0 dB 80.0 dB 0.80 fc 1.00 fc 2.37 fc 3.16 fc 0.29 dB 3.01 dB 60.0 dB 80.0 dB 0.80 fc 1.00 fc 3.16 fc 4.46 fc 0.67 dB 3.01 dB 60.0 dB 80.0 dB 0.80 fc 1.00 fc 5.62 fc 10.00 fc Impedance 1.0 MΩ min. 1.0 MΩ min. 1.0 MΩ min. Com. Mode Voltage Range ± 20 V ± 20 V ± 20 V Com. Mode Rejection Ratio @ 1 kHz <-70 dB min. <-70 dB min. <-70 dB min. Linear Voltage Range ± 10 V peak ± 10 V peak ± 10 V peak ± 40 V ± 40 V ± 40 V 50 µVrms max. 50 µVrms max. 50 µVrms max. Max. Safe Voltage (Power ON or OFF) Narrow Band Noise (5 Hz – 100 kHz) 2 1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176 e-mail: [email protected] • Web Address: http://www.freqdev.com 5BAF Series Fixed Frequency 1 Hz to 100 kHz Low-Pass Bessel Model 5BAF-LPBE8 5BAF-LPBE6 5BAF-LPBE4 Transfer Function 8-Pole Bessel 6-Pole Bessel 4-Pole Bessel Size Std. 5B Std. 5B Std. 5B Range fc 1.00 Hz to 100 kHz 1.00 Hz to 100 kHz 1.00 Hz to 100 kHz Theoretical Transfer Characteristics Appendix A Page 4 Appendix A Page 3 Appendix A Page 2 0.0 dB 0.0 dB 0.0 dB (non-inverting) 0 ± 0.1 dB typ 0 ± 0.1 dB typ 0 ± 0.1 dB typ. Differential Gain 1 ± 0.3% 1 ± 0.3% 1 ± 0.3% Stopband Attenuation Rate 48 dB/octave 36 dB/octave 24 dB/octave Accuracy fc ± 2% max. ± 2% max. ± 2% max. Phase -182° -155° -121° Product Specifications Passband Ripple (theoretical) DC Voltage Gain Filter Attenuation (theoretical) 1.91 dB 3.01 dB 60.0 dB 80.0 dB 0.80 fc 1.00 fc 4.52 fc 6.07 fc 1.89 dB 3.01 dB 60.0 dB 80.0 dB 0.80 fc 1.00 fc 5.41 fc 7.99 fc 1.86 dB 3.01 dB 60.0 dB 80.0 dB 0.80 fc 1.00 fc 8.48 fc 15.12 fc Impedance 1.0 MΩ min. 1.0 MΩ min. 1.0 MΩ min. Com. Mode Voltage Range ± 20 V ± 20 V ± 20 V Com. Mode Rejection Ratio @ 1 kHz <-70 dB min. <-70 dB min. <-70 dB min. Linear Voltage Range ± 10 V peak ± 10 V peak ± 10 V peak ± 40 V ± 40 V ± 40 V 50 µVrms max. 50 µVrms max. 50 µVrms max. Max. Safe Voltage (Power ON or OFF) Narrow Band Noise (5 Hz – 100 kHz) 3 1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176 e-mail: [email protected] • Web Address: http://www.freqdev.com 5BAF Series Fixed Frequency 1 Hz to 100 kHz High-Pass Butterworth Model 5BAF-HPBU8 5BAF-HPBU6 5BAF-HPBU4 Transfer Function 8-Pole Butterworth 6-Pole Butterworth 4-Pole Butterworth Size Std. 5B Std. 5B Std. 5B Range fc 1.00 Hz to 100 kHz 1.00 Hz to 100 kHz 1.00 Hz to 100 kHz Theoretical Transfer Characteristics Appendix A Page 29 Appendix A Page 28 Appendix A Page 27 0.0 dB 0.0 dB 0.0 dB (non-inverting) 0 ± 0.1dB to 100kHz 0 ± 0.1dB to 100kHz 0 ± 0.1dB to 100kHz Differential Gain 1 ± 0.3% 1 ± 0.3% 1 ± 0.3% Stopband Attenuation Rate 48 dB/octave 36 dB/octave 24 dB/octave Small Signal Bandwidth (-6 dB) 1 MHz (-6 dB) 1 MHz (-6 dB) 1 MHz Power Bandwidth 120 kHz 120 kHz 120 kHz Accuracy fc ± 2% max. ± 2% max. ± 2% max. Phase -360° -270° -180° Product Specifications Passband Ripple (theoretical) DC Voltage Gain Filter Attenuation (theoretical) 80.0 dB 60.0 dB 3.01 dB 00.0 dB 0.31 fc 0.42 fc 1.00 fc 2.00 fc 80.0 dB 60.0 dB 3.01 dB 00.0 dB 0.21 fc 0.32 fc 1.00 fc 2.50 fc 80.0 dB 60.0 dB 3.01 dB 00.0 dB 0.10 fc 0.18 fc 1.00 fc 4.00 fc Impedance 1.0 MΩ min. 1.0 MΩ min. 1.0 MΩ min. Com. Mode Voltage Range ± 20 V ± 20 V ± 20 V Com. Mode Rejection Ratio @ 1 kHz <-70 dB min. <-70 dB min. <-70 dB min. Linear Voltage Range ± 10 V peak ± 10 V peak ± 10 V peak ± 40 V ± 40 V ± 40 V 100 µVrms max. 100 µVrms max. 100 µVrms max. Max. Safe Voltage (Power ON or OFF) Narrow Band Noise (5 Hz – 100 kHz) 4 1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176 e-mail: [email protected] • Web Address: http://www.freqdev.com 5BAF Series Pin-Out, Package Data And Order Information Specifications 1 Analog Input Characteristics See transfer function specifications. Pin Designations NA 1,2 Analog Output Characteristics Impedance (Closed Loop) <1 Ω typ. 10 Ω max. Linear Operating Range ±10V pk Maximum Current ±2.0mA Offset Voltage ±3mV typ. Offset Temp. Coeff. ±100 µV/°C Gain Drift 3 ± 30 ppm/°C Output Load See note 3 Power Supply (±Vs) Rated Voltage Quiescent Current Vout 20 NA 18 POWER COM 16 INHI 6 NA 4 NA 23 NA 21 NA 19 I/O COM 17 + 5V 5 INLO 3 NA 1 NA 22 2 Bottom View Package Data + 5V ± 0.5 Vdc Typ. Max. 8P 113mA 150mA 6P 101mA 127mA 4P 75mA 98mA 5BAF Filter Series 0.590 (15.0) 2.250 (57.2) 0.350 (8.6) 0.150 (3.8) 0.075 (1.8) typ 0.375 (9.2) Temperature Operating Storage -25 to + 85°C -40 to + 85°C 0.525 (12.9) 5BAF - LPBU6 6 Pole Butterworth Filter 20.0 kHz Notes: 1. Input and output signal voltage referenced to I/O COM. 2. Output is short circuit protected to common. DO NOT CONNECT TO +5V or POWER COM. 1.5 k Ω 0.275 (6.7) 0.375 (9.5) 2.250 (57.2) 0.375 (9.5) SOCKET for 0.038 PIN 0.100 (2.5) 1.175 (29.8) INSERT for 3mm SCREW 0.475 (11.6) Made in the USA 3. Output can drive a series 1.5 kΩ resistor and 0.0022 µF capacitor without slew rate limiting with a ± 10 V square wave input. 0.0022 µF 2.250 (57.2) 0.590 (15.0) 0.150 (3.8) 1.605 (41.9) Dimensions in inches (mm) 0.250 (6.3) Ordering Information BE - Bessel-LP Only BU - Butterworth Corner Frequency4 1 Hz to 100 kHz 4. How to specify Corner Frequencies: Corner frequencies are specified by attaching a three digit frequency designator to the basic model number. Corner frequencies can range from 1 Hz to 50 kHz. 5BAF-LPBE6-fc # of Poles LP - Lowpass HP - Highpass 4, 6, 8 We hope the information given here will be helpful. The information is based on data and our best knowledge, and we consider the information to be true and accurate. Please read all statements, recommendations or suggestions herein in conjunction with our conditions of sale which apply to all goods supplied by us. We assume no responsibility for the use of these statements, recommendations or suggestions, nor do we intend them as a recommendation for any use which would infringe any patent or copyright. IN-005BAF-03 5 1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176 e-mail: [email protected] • Web Address: http://www.freqdev.com