Type 5ST / 5STP Time-lag Fuse Series (Low Breaking Capacity) 5STD0598 Electrical Characteristics (IEC-127-2 STANDARD SHEET 3) Rated Current 5 x 20mm Glass Tube 1.5 In 2.1 In 2.75 In 4 In 10 In Maximum Power Dissipation (W) Ampere Rating 5ST (P) 63 63mA 23.9 2.77 0.008 0.021 0.28 5ST (P) 80 80mA 15.7 2.24 0.015 0.036 0.29 5ST (P) 100 100mA 10.3 1.82 0.03 0.06 0.30 5ST (P) 125 125mA 6.8 1.47 0.05 0.11 0.30 5ST (P) 160 160mA 4.4 1.19 0.08 0.19 0.31 MIN MAX MIN 5ST (P) 200 200mA 2.9 0.97 0.15 0.33 0.32 63mA to 100mA 1 2 200 10 40 3 10 300 5ST (P) 250 250mA 1.9 0.78 0.26 0.58 0.32 125mA and above 1 2 600 10 150 3 20 300 5ST (P) 315 315mA 1.3 0.63 0.46 1.01 0.33 hr. min. ms sec ms sec ms ms 5ST (P) 400 400mA 0.82 0.51 0.81 1.76 0.34 5ST (P) 500 500mA 0.54 0.42 1.4 3.1 0.34 5ST (P) 630 630mA 0.22 0.17 0.9 1.5 0.18 5ST (P) 800 800mA 0.15 0.15 1.6 2.5 0.20 1A 0.07 0.10 2.4 3.3 0.17 5ST (P) 1.25 1.25A 0.06 0.09 4.1 5.5 0.19 5ST (P) 1.6 1.6A 0.04 0.09 6.9 8.9 0.23 Approvals sdmrSc Safety Agency Approvals s MAX MIN MAX MIN MAX Typical Volt-drop Melting I2T Melting I2T Cold @100% In < 10 mSec @10 In Resistance 2 (Volt) max. (A Sec) (A2 Sec) (ohm) Catalog Number Amp range / Volt @ I.R. ability Certificate No. 9311050 & 9342093 d License No. 85636 m Certificate No. EI261 r Recognized File No. E20624 S Acceptance File No. LR39772 63mA - 6.3A / 250V AC@ 35A or 10 In whichever is greater 63mA - 10A / 250V AC@ 35A or 10 In whichever is greater 5ST (P) 1 5ST (P) 2 2A 0.03 0.08 12 15 0.26 5ST (P) 2.5 2.5A 0.02 0.07 20 24 0.31 5ST (P) 3.15 3.15A 0.018 0.07 33 39 0.36 4A 0.014 0.06 56 64 0.42 5ST (P) 4 5ST (P) 5 Operating Temperature -55ºC to +125ºC Physical Specification Materials Glass body / Nickel Plated Brass Caps Lead wire: Tin-lead plated Copper, Diameter 0.032", 6.3A and less Diameter 0.040", 8A and above Marking On fuse: “bel”, “T”, “Current Rating”, “L”, “250V” and “Appropriate Safety Logos” On label: Above info plus “5ST” or “5STP”, “c” and interrupting rating Packaging 1.In bulk: 5ST - 1,000 pcs per box; 5STP - 500 pcs per box 2. On Axial Tape & Reel: 1,500 pcs per reel 3. Tape & Reel specification: per EIA-296-E & IEC 286-1 @ 10mm Pitch and 63.5mm inside Tape Spacing 5A 0.011 0.06 95 105 0.49 6.3A 0.008 0.06 160 173 0.57 5ST (P) 8 8A 0.006 0.06 260 282 0.8 5ST (P) 10 10A 0.005 0.06 439 461 1.0 5ST (P) 6.3 Consult manufacturer for other ratings Mechanical Dimensions 5ST 1.5" ± 0.08" (38.1 ± 2mm) 0.787" ± 0.02" (20 ± 0.5mm) 0.20" ± 0.004" (5.1 ± 0.1mm) 0.827" ± 0.02" (21.0 ± 0.5mm) 0.217" ± 0.004" (5.5 ± 0.1mm) 5STP SEE LEAD SIZE LISTED IN “ MATERIAL” Specifications subject to change without notice Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: [email protected] Internet: http://www. belfuse.com Type 5ST / 5STP 5 x 20mm Glass Tube Time-lag Fuse Series (Low Breaking Capacity) 5STC0600 - 63mA - 80mA - 100mA - 125mA - 160mA - 200mA - 250mA - 315mA - 400mA - 500mA - 630mA - 800mA - 1A - 1.25A - 1.6A - 2A - 2.5A - 3.15A - 4A - 5A - 6.3A - 8A - 10A 5ST / 5STP - TIME CURRENT CHARACTERISTIC CURVE 10000 TIME IN SECONDS 1000 100 10 0.1 0.01 0.01 0.1 1 10 100 1000 CURRENT IN AMPERES Specifications subject to change without notice 1 NOTE - see important information under “User Guide”on P.08 Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 FaxFax: 201-432-9542 E-Mail: [email protected] Internet: http://www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Te l : 8 5 2 - 2 3 2 8 - 5 5 1 5 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. P r e s t o n Te c h n o l o g y M a n a g e m e n t C e n t r e Marsh Lane, Preston PR1 8U Lancashire, U.K Te l : 4 4 - 1 7 7 2 - 5 5 6 6 0 1 Fax: 44-1772-888366