IDC Systems Cable PRODUCT DESCRIPTION Thomas & Betts flat cable provides the means to reduce mass and weight in flexible wiring assemblies. Available with PVC, TPE or FEP insulation, the cable is extruded to provide precise and uniform alignment of the conductor spacing. FLAT AND ROUND CABLE DESIGN ADVANTAGES • Extruded PVC, TPE or FEP insulation for precise conductor spacing. • Polarizing stripe allows easy identification of number one circuit even in twisted or irregularly curved applications. • Thomas & Betts cable cutters and IDC termination tooling are matched to the cable tolerances to provide uniform results and troublefree, high performance fine pitch cable assemblies. • Available in standard .025", .050", and spread pitch configurations. • Available in various gauge wire. • Available in ground plane, high flex, color-coded, round to flat, twisted pair, and jacketed configurations. Fine Pitch (.025") Standard Pitch (.050") Flat Cable: Flat Cable: 136 PVC, 30 AWG, Solid 102 171 PVC, 28 AWG, Stranded 116 137 PVC, 30 AWG, Stranded 103 173 PVC, 28 AWG, Solid 117 131 TPE, 30 AWG, Solid 104 179 PVC, 26 AWG, Stranded 118 132 TPE, 30 AWG, Stranded 105 177 TPE, 28 AWG, Stranded 119 134 TPO, 30 AWG, Solid Fast SCSI 106 199 Halogen Free, 28 AWG (7/36) Stranded 120 138 TPO, 31 AWG, Solid Fast SCSI 107 185 High Flex, PVC , Stranded 121 139 TPO, 30 AWG, Stranded Fast SCSI 108 174 PVC Jacketed, 28 AWG 122 140 FEP, 32 AWG, Stranded 109 187 PVC Jacketed/Shielded 123 141 FEP, 32 AWG, Solid 110 196 Ground Plane, 28 AWG 124 188 PVC Jacketed/Shielded, 30 AWG 111 200 PVC Twisted Pair, Flat 125 198 PVC Ground Plane, 30 AWG 112 200/201 PVC Color Coded (28/26 AWG) 126 PVC Shielded—Round 113 28 AWG, Shielded/Non-shielded 127 Round to Flat, 28 AWG 128 Round Cable: 302 Round Cable: 300/301 Prepared Cable: 136-xxx-0100 Transition Cable, Single End 114 136-xxx-0100D Transition Cable, Double End 115 Prepared Cable: 203/204 Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 101 IDC Systems Flat Ribbon Cables .025" PITCH FLAT CABLE 136 SERIES (30 AWG SOLID PVC) LL53375 E41651 PHYSICAL PROPERTIES INSULATION MATERIAL: Flexible PVC COLOR: Blue/Grey CONDUCTORS: 30 AWG, solid bare copper ELECTRICAL PROPERTIES VOLTAGE RATING: 150V rms INSULATION RESISTANCE: >1010 Ohms IMPEDANCE: 80 Ohms CAPACITANCE @ 1 MHZ: 62.3 pF/m (19.0 pF/ft.) INDUCTANCE @ 1 MHZ: .49 µH/m (.15 µH/ft.) PROPOGATION DELAY: 5.25 nSec/m (1.60 nSec/ft.) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING : –20˚ C to 105˚ C APPLICATION TOOLING CABLE CUTTER: 779-5030M PACKAGING STANDARD: Splice free 100 foot rolls with UL/CSA markings on reels. OPTIONAL: Other roll quantities and labeling options available. See page 129 for details. UL Style No. 2678 UL94VW-1 COMPLIANT Ordering Information NUMBER OF CONDUCTORS CATALOG NUMBER A DIMENSIONS B 20 136-020 12.70 (.500) 12.07 (.475) 26 136-026 16.51 (.650) 15.88 (.625) 30 136-030 19.05 (.750) 18.42 (.725) 34 136-034 21.59 (.850) 20.96 (.825) 40 136-040 25.40 (1.000) 24.77 (.975) 50 136-050 31.75 (1.250) 31.12 (1.225) 60 136-060 38.10 (1.500) 37.47 (1.475) 68 136-068 43.18 (1.700) 42.55 (1.675) 80 136-080 50.80 (2.000) 50.17 (1.975) 100 136-100 63.50 (2.500) 62.87 (2.475) 120 136-120 76.20 (3.000) 75.57 (2.975) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 102 IDC Systems Flat Ribbon Cables .025" PITCH FLAT CABLE 137 SERIES (30 AWG STRANDED PVC) LL53375 E41651 PHYSICAL PROPERTIES INSULATION MATERIAL: Flexible PVC COLOR: Blue/Grey CONDUCTORS: 30 AWG, 7/38 tinned, stranded copper ELECTRICAL PROPERTIES VOLTAGE RATING: 150V rms INSULATION RESISTANCE: >1010 Ohms IMPEDANCE: 70 Ohms CAPACITANCE @ 1 MHZ: 82.0 pF/m (25.0 pF/ft.) INDUCTANCE @ 1 MHZ: .46 µH/m (.14 µH/ft.) PROPOGATION DELAY: 5.08 nSec/m (1.55 nSec/ft.) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING : –20˚ C to 105˚ C APPLICATION TOOLING CABLE CUTTER: 779-5030M PACKAGING STANDARD: Splice free 100 foot rolls with UL/CSA markings on reels. OPTIONAL: Other roll quantities and labeling options available. See page 129 for details. UL Style No. 2678 UL94VW-1 COMPLIANT Ordering Information NUMBER OF CONDUCTORS CATALOG NUMBER A DIMENSIONS B 20 137-020 12.70 (.500) 12.07 (.475) 26 137-026 16.51 (.650) 15.88 (.625) 30 137-030 19.05 (.750) 18.42 (.725) 34 137-034 21.59 (.850) 20.96 (.825) 40 137-040 25.40 (1.000) 24.77 (.975) 50 137-050 31.75 (1.250) 31.12 (1.225) 60 137-060 38.10 (1.500) 37.47 (1.475) 68 137-068 43.18 (1.700) 42.55 (1.675) 80 137-080 50.80 (2.000) 50.17 (1.975) 100 137-100 63.50 (2.500) 62.87 (2.475) 120 137-120 76.2 (3.000) 75.57 (2.975) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 103 IDC Systems Flat Ribbon Cables .025" PITCH FLAT CABLE 131 SERIES (30 AWG SOLID (TPE) LL53375 E41651 PHYSICAL PROPERTIES INSULATION MATERIAL: Thermoplastic Elastomer (TPE) COLOR: White CONDUCTORS: 30 AWG Solid ELECTRICAL PROPERTIES VOLTAGE RATING: 150V rms INSULATION RESISTANCE: >5X1010 Ohms/FT IMPEDANCE: 88 Ohms CAPACITANCE @ 1 MHZ: 71.8 pF/m (16.5 pF/ft.) INDUCTANCE @ 1 MHZ: .502 µH/m (.153 µH/ft.) PROPOGATION DELAY: 4.97 ns/m (1.410 ns/ft.) RISE TIME: 5 NEAR END %: 1.9 FAR END %: 3.1 ENVIRONMENTAL PROPERTIES TEMPERATURE: -20˚ C to +105˚ C (-4˚ F to +221˚ F) APPLICATION TOOLING CABLE CUTTER: 779-5030M PACKAGING STANDARD: Splice free 100 foot rolls with UL/CSA markings on reels. OPTIONAL: Other roll quantities and labeling options available. See page 129 for details. UL Style No. 20650 UL94VW-1 COMPLIANT Ordering Information NUMBER OF CONDUCTORS CATALOG NUMBER A DIMENSIONS B 20 131-020 12.70 (.500) 12.07 (.475) 26 131-026 16.51 (.650) 15.88 (.625) 30 131-030 19.05 (.750) 18.42 (.725) 34 131-034 21.59 (.850) 20.96 (.825) 40 131-040 25.40 (1.000) 24.77 (.975) 50 131-050 31.75 (1.250) 31.12 (1.225) 60 131-060 38.10 (1.500) 37.47 (1.475) 68 131-068 43.18 (1.700) 42.55 (1.675) 80 131-080 50.80 (2.000) 50.17 (1.975) 100 131-100 63.50 (2.500) 62.87 (2.475) 120 131-120 76.20 (3.000) 75.57 (2.975) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 104 IDC Systems Flat Ribbon Cables .025" PITCH FLAT CABLE 132 SERIES (30 AWG STRANDED (TPE) LR53375 E41651 PHYSICAL PROPERTIES INSULATION MATERIAL: Thermoplastic Elastomer (TPE) COLOR: White CONDUCTORS: 30 AWG (7/38) Tinned Stranded Copper ELECTRICAL PROPERTIES VOLTAGE RATING: 150V rms INSULATION RESISTANCE: >1X1012 Ohms/FT IMPEDANCE: 80 Ohms CAPACITANCE @ 1 MHZ: 65.61 pF/m (17.8 pF/ft.) INDUCTANCE @ 1 MHZ: .433 µH/m (.132 µH/ft.) PROPOGATION DELAY: 4.93 ns/m (1.47 ns/ft.) RISE TIME: 5 NEAR END %: 1.9 FAR END %: 3.1 ENVIRONMENTAL PROPERTIES TEMPERATURE: -20˚ C to +105˚ C (-4˚ F to +221˚ F) APPLICATION TOOLING CABLE CUTTER: 779-5030M PACKAGING STANDARD: Splice free 100 foot rolls with UL/CSA markings on reels. OPTIONAL: Other roll quantities and labeling options available. See page 129 for details. UL Style No. 20650 UL94VW-1 COMPLIANT Ordering Information NUMBER OF CONDUCTORS CATALOG NUMBER A DIMENSIONS B 20 132-020 12.70 (.500) 12.07 (.475) 26 132-026 16.51 (.650) 15.88 (.625) 30 132-030 19.05 (.750) 18.42 (.725) 34 132-034 21.59 (.850) 20.96 (.825) 40 132-040 25.40 (1.000) 24.77 (.975) 50 132-050 31.75 (1.250) 31.12 (1.225) 60 132-060 38.10 (1.500) 37.47 (1.475) 68 132-068 43.18 (1.700) 42.55 (1.675) 80 132-080 50.80 (2.000) 50.17 (1.975) 100 132-100 63.50 (2.500) 62.87 (2.475) 120 132-120 76.20 (3.000) 75.57 (2.975) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 105 IDC Systems Flat Ribbon Cables .025" PITCH FLAT CABLE 134 SERIES, FAST SCSI (30 AWG SOLID, TPO) LR92984 E60980 PHYSICAL PROPERTIES INSULATION MATERIAL: Thermoplastic Olefinic (TPO) COLOR: white CONDUCTORS: 30 AWG, solid ELECTRICAL PROPERTIES VOLTAGE RATING: 150V rms INSULATION RESISTANCE: >1010 0hms IMPEDANCE: 90 Ohms CAPACITANCE @ 1 MHZ: 53 pF/M (16.0 pF/ft) INDUCTANCE @ 1 MHZ: .43 mH/M (.13 uH/ft) PROPAGATION DELAY: 4.43 nSec/M (1.348 nSec/ft) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING: -20˚C TO 105°C (-4˚F to +221˚F) APPLICATION TOOLING CABLE CUTTER: 779-5030M PACKAGING STANDARD: Splice free 100 foot rolls with UL/CSA markings on reel OPTIONAL: Other roll quantities and labeling options available. See page 129 for details. UL94VW-1 COMPLIANT Ordering Information NUMBER OF CONDUCTORS CATALOG NUMBER A DIMENSIONS B 20 134-020 12.70 (.500) 12.07 (.475) 26 134-026 16.51 (.650) 15.88 (.625) 30 134-030 19.05 (.750) 18.42 (.725) 34 134-034 21.59 (.850) 20.96 (.825) 40 134-040 25.40 (1.000) 24.77 (.975) 50 134-050 31.75 (1.250) 31.12 (1.225) 60 134-060 38.10 (1.500) 37.47 (1.475) 68 134-068 43.18 (1.700) 42.55 (1.675) 80 134-080 50.80 (2.000) 50.17 (1.975) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 106 IDC Systems Flat Ribbon Cables .025" PITCH FLAT CABLE 138 SERIES, FAST SCSI (31 AWG SOLID, TPO) LR92984 E60980 PHYSICAL PROPERTIES INSULATION MATERIAL: Thermoplastic Polyolefin (TPO) COLOR: white CONDUCTORS: 31 AWG, solid ELECTRICAL PROPERTIES VOLTAGE RATING: 150V rms INSULATION RESISTANCE: >1010 0hms IMPEDANCE: 96 Ohms CAPACITANCE @ 1 MHZ: 49 pF/M (14.8 pF/ft) INDUCTANCE @ 1 MHZ: .50 mH/M (.15 uH/ft) PROPAGATION DELAY: 4.43 nSec/M (1.348 nSec/ft) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING: -20˚C TO 105°C (-4˚F to +221˚F) APPLICATION TOOLING CABLE CUTTER: 779-5030M PACKAGING STANDARD: Splice free 100 foot rolls with UL/CSA markings on reel OPTIONAL: Other roll quantities and labeling options available. See page 129 for details. UL94VW-1 COMPLIANT Ordering Information NUMBER OF CONDUCTORS CATALOG NUMBER A DIMENSIONS B 20 138-020 12.70 (.500) 12.07 (.475) 26 138-026 16.51 (.650) 15.88 (.625) 30 138-030 19.05 (.750) 18.42 (.725) 34 138-034 21.59 (.850) 20.96 (.825) 40 138-040 25.40 (1.000) 24.77 (.975) 50 138-050 31.75 (1.250) 31.12 (1.225) 60 138-060 38.10 (1.500) 37.47 (1.475) 68 138-068 43.18 (1.700) 42.55 (1.675) 80 138-080 50.80 (2.000) 50.17 (1.975) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 107 IDC Systems Flat Ribbon Cables .025" PITCH FLAT CABLE 139 SERIES, FAST SCSI (31 AWG STRANDED, TPO) LR92984 E60980 PHYSICAL PROPERTIES INSULATION MATERIAL: Thermoplastic Polyolefin (TPO) COLOR: white CONDUCTORS: 31 AWG, (7/39) tinned stranded copper ELECTRICAL PROPERTIES VOLTAGE RATING: 150V rms INSULATION RESISTANCE: >1010 0hms IMPEDANCE: 90 Ohms CAPACITANCE @ 1 MHZ: 65.6 pF/M (16.0 pF/ft) INDUCTANCE @ 1 MHZ: .43 mH/M (.13 uH/ft) PROPAGATION DELAY: 4.93 nSec/M (1.32 nSec/ft) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING: -20˚C TO 105°C (-4˚F to +221˚F) APPLICATION TOOLING CABLE CUTTER: 779-5030M PACKAGING STANDARD: Splice free 100 foot rolls with UL/CSA markings on reel OPTIONAL: Other roll quantities and labeling options available. See page 129 for details. UL94VW-1 COMPLIANT Ordering Information NUMBER OF CONDUCTORS CATALOG NUMBER A DIMENSIONS B 20 139-020 12.70 (.500) 12.07 (.475) 26 139-026 16.51 (.650) 15.88 (.625) 30 139-030 19.05 (.750) 18.42 (.725) 34 139-034 21.59 (.850) 20.96 (.825) 40 139-040 25.40 (1.000) 24.77 (.975) 50 139-050 31.75 (1.250) 31.12 (1.225) 60 139-060 38.10 (1.500) 37.47 (1.475) 68 139-068 43.18 (1.700) 42.55 (1.675) 80 139-080 50.80 (2.000) 50.17 (1.975) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 108 IDC Systems Flat Ribbon Cables .025" PITCH FLAT CABLE 140 SERIES (32 AWG STRANDED TEFLON®) LL53375 E41651 PHYSICAL PROPERTIES INSULATION MATERIAL: Extruded (Teflon) FEP COLOR: Natural CONDUCTORS: 32 AWG, 7/40 silver plated, stranded copper ELECTRICAL PROPERTIES VOLTAGE RATING: 150V rms INSULATION RESISTANCE: >1011 Ohms IMPEDANCE: 95 Ohms CAPACITANCE @ 1 MHZ: 42.6 pF/m (13.0 pF/ft.) INDUCTANCE @ 1 MHZ: .52 µH/m (.16 µH/ft.) PROPOGATION DELAY: 4.33 nSec/m (1.32 nSec/ft.) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING : 200˚ C APPLICATION TOOLING CABLE CUTTER: 779-5030M PACKAGING STANDARD: Splice free 100 foot rolls UL Style No. 20726 UL94VW-1 COMPLIANT Ordering Information NUMBER OF CONDUCTORS CATALOG NUMBER A DIMENSIONS B 20 140-020 12.70 (.500) 12.07 (.475) 26 140-026 16.51 (.650) 15.88 (.625) 30 140-030 19.05 (.750) 18.41 (.725) 40 140-040 25.40 (1.000) 24.76 (.975) 50 140-050 31.75 (1.250) 31.11 (1.225) 68 140-068 43.18 (1.700) 42.54 (1.675) 80 140-080 50.80 (2.000) 50.16 (1.975) 100 140-100 63.50 (2.500) 62.86 (2.475) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 109 IDC Systems Flat Ribbon Cables .025" PITCH FLAT CABLE 141 SERIES (30 AWG SOLID TEFLON®) LL53375 E41651 PHYSICAL PROPERTIES INSULATION MATERIAL: Extruded Teflon FEP COLOR: Natural CONDUCTORS: 30 AWG, silver plated, solid copper ELECTRICAL PROPERTIES VOLTAGE RATING: 150V rms INSULATION RESISTANCE: >1011 Ohms IMPEDANCE: 90 Ohms CAPACITANCE @ 1 MHZ: 45.9 pF/m (14.0 pF/ft.) INDUCTANCE @ 1 MHZ: .48 µH/m (.14 µH/ft.) PROPOGATION DELAY: 4.30 nSec/m (1.32 nSec/ft.) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING : 150˚ C APPLICATION TOOLING CABLE CUTTER: 779-5030M PACKAGING STANDARD: Splice free 100 foot rolls UL Style No. 20726 UL94VW-1 COMPLIANT Ordering Information NUMBER OF CONDUCTORS CATALOG NUMBER A DIMENSIONS B 20 141-020 12.70 (.500) 12.07 (.475) 26 141-026 16.51 (.650) 15.88 (.625) 30 141-030 19.05 (.750) 18.41 (.725) 40 141-040 25.40 (1.000) 24.76 (.975) 50 141-050 31.75 (1.250) 31.11 (1.225) 68 141-068 43.18 (1.700) 42.54 (1.675) 80 141-080 50.80 (2.000) 50.16 (1.975) 100 141-100 63.50 (2.500) 62.86 (2.475) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 110 IDC Systems Flat Ribbon Cables .025" PITCH JACKETED, SHIELDED FLAT CABLE 188 SERIES (30 AWG SOLID PVC) LL53375 E41651 PHYSICAL PROPERTIES INSULATION MATERIAL, CABLE: Flexible PVC COLOR, CABLE: Blue/Grey INSULATION MATERIAL, JACKET: Flexible PVC COLOR, JACKET: Black CONDUCTORS: 30 AWG, solid bare copper ELECTRICAL PROPERTIES VOLTAGE RATING: 150V rms INSULATION RESISTANCE: >1010 Ohms/3m (10 ft.) IMPEDANCE (GSG SHIELDED GROUND): 55 Ohms CAPACITANCE @ 1 MHZ: 98.4 pF/m (30.0 pF/ft.) INDUCTANCE @ 1 MHZ: .39 µH/m (.12 µH/ft.) PROPOGATION DELAY: 5.09 nSec/m (1.55 nSec/ft.) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING : –20˚ C to 105˚ C APPLICATION TOOLING CABLE CUTTER: 779-5030M FEATURES • CSA certified AWM for external wiring • Foil shielding provides EMI/RFI protection • Jacketing provides cable durability PACKAGING STANDARD: Splice free 100 foot rolls UL Style No. 2912 UL94VW-1 COMPLIANT Ordering Information NUMBER OF CONDUCTORS CATALOG NUMBER A DIMENSIONS B 20 188-020 12.70 (.500) 12.07 (.475) 26 188-026 16.51 (.650) 15.88 (.625) 40 188-040 25.40 (1.000) 24.77 (.975) 50 188-050 31.75 (1.250) 31.12 (1.225) 60 188-060 38.10 (1.500) 37.47 (1.475) 68 188-068 43.18 (1.700) 42.55 (1.675) 80 188-080 50.80 (2.000) 50.17 (1.975) 100 188-100 63.50 (2.500) 62.87 (2.475) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 111 IDC Systems Flat Ribbon Cables .025" PITCH GROUND PLANE FLAT CABLE 198 SERIES (30 AWG SOLID PVC) LL53375 E41651 PHYSICAL PROPERTIES INSULATION MATERIAL: Flexible PVC COLOR: Blue/Grey CONDUCTORS AND PLANE WIRE: 30 AWG, solid bare copper GROUND PLANE: Expanded copper mesh, .13 (.005) thick ELECTRICAL PROPERTIES VOLTAGE RATING: 300V rms INSULATION RESISTANCE: >1010 Ohms/3m (10 ft.) IMPEDANCE (GSG SHIELDED GROUND): 65 Ohms CAPACITANCE @ 1 MHZ: 98.4 pF/m (30.0 pF/ft.) INDUCTANCE @ 1 MHZ: .46 µH/m (.14 µH/ft.) PROPOGATION DELAY: 5.41 nSec/m (1.65 nSec/ft.) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING : –20˚ C to 105˚ C APPLICATION TOOLING CABLE CUTTER: 779-5030M FEATURES • Ground plane structure provides increased signal density and improved transmission characteristics • Ground plane can be removed by hand for easy connector application PACKAGING STANDARD: Splice free 100 foot rolls UL Style No. 2682 UL94VW-1 COMPLIANT Ordering Information NUMBER OF CONDUCTORS CATALOG NUMBER A DIMENSIONS B 20 198-020 12.70 (.500) 12.07 (.475) 26 198-026 16.51 (.650) 15.88 (.625) 40 198-040 25.40 (1.000) 24.77 (.975) 50 198-050 31.75 (1.250) 31.12 (1.225) 60 198-060 38.10 (1.500) 37.47 (1.475) 68 198-068 43.18 (1.700) 42.55 (1.675) 80 198-080 50.80 (2.000) 50.17 (1.975) 100 198-100 63.50 (2.500) 62.87 (2.475) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 112 IDC Systems .025” PITCH ROUND-TO-FLAT CABLE (FOIL/ BRAID/ SHIELD) 302 SERIES (30 AWG SOLID) LL53375 E41651 PHYSICAL PROPERTIES INSULATION MATERIAL CABLE: Flexible PVC COLOR, CABLE: Blue/gray JACKET: Flexible PVC COLOR, JACKET: Black CONDUCTORS: 30 AWG, solid bare copper DISTANCE BETWEEN FLAT TERMINATION SECTIONS: 1.375" ELECTRICAL PROPERTIES VOLTAGE RATING: 150V ms INSULATION RESISTANCE: > 10 Ohms/3m (10 ft.) IMPEDANCE @ 1MHZ: 88.6 pF/m (27.0 pF/ft.) INDUCTANCE @ 1MHZ: .39 uH/m (.12 uH/ft.) PROPAGATION DELAY: 5.25 nSec/m (1.60 nSec/ft.) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING: -20˚ C to 105˚ C APPLICATION TOOLING Ordering Information Reference CABLE CUTTER: 779-5030M Packaged on splice-free 100’ rolls. NUMBER OF CONDUCTORS CATALOG NUMBER DIMENSIONS A B 26 302-026 16.51 (.650) 15.88 (.625) 40 302-040 25.40 (1.000) 24.77 (.975) 50 302-050 31.75 (1.250) 31.12 (1.225) 60 302-060 38.10 (1.500) 37.47 (1.475) 68 302-068 43.18 (1.700) 42.55 (1.675) 80 302-080 50.80 (2.000) 50.17 (1.975) 100 302-100 63.50 (2.500) 62.87 (2.475) FEATURES • PVC jacket prevents damage in external applications • Round cross-section allows maximum system airflow • Shielding braid provides EMI / RFI protection • Alternating flat and slit sections along cable length allow mass termination of IDC connector without the need for lamination or lacing equipment UL94VW-1 COMPLIANT Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 113 IDC Systems Flat Ribbon Cables TRANSITION CABLE ONE SPREAD END .025" TO .050" (30 AWG SOLID PVC) LL58162 E47817 PHYSICAL PROPERTIES INSULATION MATERIAL: Flexible PVC COLOR: Blue/Grey CONDUCTORS: 30 AWG, solid bare copper ELECTRICAL PROPERTIES VOLTAGE RATING: 150V rms INSULATION RESISTANCE: >1010 Ohms IMPEDANCE: 80 Ohms CAPACITANCE @ 1 MHZ: 62.3 pF/m (19.0 pF/ft.) INDUCTANCE @ 1 MHZ: .49 µH/m (.15 µH/ft.) PROPOGATION DELAY: 5.25 nSec/m (1.60 nSec/ft.) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING : –20˚ C to 105˚ C UL94VW-1 COMPLIANT 136 - XXX XX XX # of Conductors Length in Feet Length in Inches Ordering Information NUMBER OF CONDUCTORS CATALOG NUMBER A B DIMENSIONS C D E* 20 136-020-0100 12.70 (.500) 26 136-026-0100 16.51 (.650) 12.07 (.475) 24.13 (.950) 25.40 (1.000) 305 (12.0) 15.88 (.625) 31.75 (1.250) 33.02 (1.300) 305 (12.0) 30 136-030-0100 34 136-034-0100 19.05 (.750) 18.42 (.725) 36.83 (1.450) 38.10 (1.500) 305 (12.0) 21.59 (.850) 20.96 (.825) 41.91 (1.650) 43.18 (1.700) 305 (12.0) 40 136-040-0100 25.40 (1.000) 24.77 (.975) 49.53 (1.950) 50.80 (2.000) 305 (12.0) 50 136-050-0100 31.75 (1.250) 31.12 (1.225) 62.23 (2.450) 63.50 (2.500) 305 (12.0) 60 136-060-0100 38.10 (1.500) 37.47 (1.475) 74.93 (2.950) 76.20 (3.000) 305 (12.0) * Other custom cable lengths available on request. Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 114 IDC Systems Flat Ribbon Cables TRANSITION CABLE TWO SPREAD ENDS .050" TO .025" TO .050" (30 AWG SOLID PVC) LL58162 E47817 PHYSICAL PROPERTIES INSULATION MATERIAL: Flexible PVC COLOR: Blue/Grey CONDUCTORS: 30 AWG, solid bare copper ELECTRICAL PROPERTIES VOLTAGE RATING: 150V rms INSULATION RESISTANCE: >1010 Ohms IMPEDANCE: 80 Ohms CAPACITANCE @ 1 MHZ: 62.3 pF/m (19.0 pF/ft.) INDUCTANCE @ 1 MHZ: .49 µH/m (.15 µH/ft.) PROPOGATION DELAY: 5.25 nSec/m (1.60 nSec/ft.) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING : –20˚ C to 105˚ C UL94VW-1 COMPLIANT 136 - XXX XX XX # of Conductors Length in Feet Length in Inches Ordering Information NUMBER OF CATALOG CONDUCTORS NUMBER A B DIMENSIONS C D E* 20 136-020-0100D 12.70 (.500) 12.07 (.475) 24.13 (.950) 25.40 (1.000) 305 (12.0) 26 136-026-0100D 16.51 (.650) 15.88 (.625) 31.75 (1.250) 33.02 (1.300) 305 (12.0) 30 136-030-0100D 19.05 (.750) 18.42 (.725) 36.83 (1.450) 38.10 (1.500) 305 (12.0) 34 136-034-0100D 21.59 (.850) 20.96 (.825) 41.91 (1.650) 43.18 (1.700) 305 (12.0) 40 136-040-0100D 25.40 (1.000) 24.77 (.975) 49.53 (1.950) 50.80 (2.000) 305 (12.0) 50 136-050-0100D 31.75 (1.250) 31.12 (1.225) 62.23 (2.450) 63.50 (2.500) 305 (12.0) 60 136-060-0100D 38.10 (1.500) 37.47 (1.475) 74.93 (2.950) 76.20 (3.000) 305 (12.0) * Other custom cable lengths available on request. Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 115 IDC Systems Flat Ribbon Cables .050" PITCH FLAT CABLE SERIES 171 – 28 AWG (7/36) STRANDED LL53375 E41651 PHYSICAL PROPERTIES INSULATION MATERIAL: PVC CONDUCTORS: 28 AWG, Stranded CONDUCTOR SPACING MM (IN): 1.27 (.050) ELECTRICAL PROPERTIES VOLTAGE RATING: 300V rms INSULATION RESISTANCE: >1010 Ohms IMPEDANCE: 100 Ohms CAPACITANCE @ 1 MHZ: 46 pF/m (14.0 pF/ft.) INDUCTANCE @ 1 MHZ: .46 µH/m (.14 µH/ft.) PROPOGATION DELAY: 4.53 nSec/m (1.38 nSec/ft.) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING : 105˚ C PACKAGING STANDARD: Splice free 100 foot rolls with UL/CSA markings on reels OPTIONAL: Other roll quantities and labeling options available. See page 129 for details. Accumulation of pitch tolerance between conductors in entire cable may not exceed tolerance of dim. “B”. TYPICAL CROSSTALK CHARACTERISTICS: 10FT Sample, 1 line driven, 1 line sensed Test Method G-S-G G-G-S-G-G Rise Time nSec 3.0 7.0 Near End (%) 5.0 3.2 Far End (%) 6.7 2.7 UL Style No. 2651 Ordering Information UL94VW-1 COMPLIANT 28 GAUGE STRANDED NO. OF POS. DIMENSIONS IN MM (INCHES) A B 171-9 9 11.43 (.450) 10.16 (.400) 171-10ED 10 12.70 (.500) 11.43 (.450) 171-12 12 15.24 (.600) 13.97 (.550) 171-14 14 17.78 (.7 00) 16.51 (.650) 171-15 15 19.05 (.750) 17.78 (.700) 171-16 16 20.32 (.800) 19.05 (.750) 25.40 (1.000) 24.13 (.950) 171-20 20 171-24ED 24 30.48 (1.200) 29.21 (1.150) 171-25 25 31.75 (1.250) 30.48 (1.200) 171-26 26 33.02 (1.300) 31.75 (1.250) 171-28 28 35.56 (1.400) 34.29 (1.350) 171-30ED 30 38.10 (1.500) 36.83 (1.450) 171-34 34 43.18 (1.700) 41.91 (1.650) 171-36 36 45.72 (1.800) 44.45 (1.750) 46.99 (1.850) 45.72 (1.800) 171-37 37 171-40ED 40 50.80 (2.000) 49.53 (1.950) 171-44 44 55.88 (2.200) 54.61 (2.150) 171-50 50 63.50 (2.500) 62.23 (2.450) 171-56 56 71.12 (2.800) 69.85 (2.750) 171-60 60 76.20 (3.000) 74.93 (2.950) 171-64 64 81.28 (3.200) 80.01 (3.150) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 B TOLERANCE ± .18 (±.007) ± .25 (±.010) ± .38 (±.015) Dimensions shown are for reference only. Dimensions are in millimeters (inches). 116 IDC Systems Flat Ribbon Cables .050" PITCH FLAT CABLE SERIES 173 – 28 AWG SOLID LL53375 E41651 PHYSICAL PROPERTIES INSULATION MATERIAL: PVC CONDUCTORS: 28 AWG, Solid CONDUCTOR SPACING MM (IN): 1.27 (.050) ELECTRICAL PROPERTIES VOLTAGE RATING: 300V rms INSULATION RESISTANCE: >1010 Ohms IMPEDANCE: 105 Ohms CAPACITANCE @ 1 MHZ: 44.3 pF/m (13.5 pF/ft.) INDUCTANCE @ 1 MHZ: .49 µH/m (.15 µH/ft.) PROPOGATION DELAY: 4.53 nSec/m (1.38 nSec/ft.) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING : 105˚ C PACKAGING STANDARD: Splice free 100 foot rolls with UL/CSA markings on reels OPTIONAL: Other roll quantities and labeling options available. See page 129 for details. Accumulation of pitch tolerance between conductors in entire cable may not exceed tolerance of dim. “B”. TYPICAL CROSSTALK CHARACTERISTICS: 10FT Sample, 1 line driven, 1 line sensed Test Method G-S-G G-G-S-G-G Rise Time nSec 3.0 7.0 Near End (%) 4.8 3.1 Far End (%) 7.3 2.9 UL Style No. 2651 UL94VW-1 COMPLIANT Ordering Information CATALOG NUMBERS 28 GAUGE SOLID NO. OF POS. DIMENSIONS IN MM (INCHES) A B 173-9 9 11.43 (.450) 10.16 (.400) 173-10 10 12.70 (.500) 11.43 (.450) — 12 15.24 (.600) 13.97 (.550) 173-14 14 17.78 (.7 00) 16.51 (.650) 173-15 15 19.05 (.750) 17.78 (.700) 173-16 16 20.32 (.800) 19.05 (.750) 173-20 20 25.40 (1.000) 24.13 (.950) 173-24 24 30.48 (1.200) 29.21 (1.150) 173-25 25 31.75 (1.250) 30.48 (1.200) 173-26 26 33.02 (1.300) 31.75 (1.250) — 28 35.56 (1.400) 34.29 (1.350) 38.10 (1.500) 36.83 (1.450) — 30 173-34 34 43.18 (1.700) 41.91 (1.650) — 36 45.72 (1.800) 44.45 (1.750) 173-37 37 46.99 (1.850) 45.72 (1.800) 173-40 40 50.80 (2.000) 49.53 (1.950) 173-44 44 55.88 (2.200) 54.61 (2.150) 173-50 50 63.50 (2.500) 62.23 (2.450) 173-56 56 71.12 (2.800) 69.85 (2.750) 173-60 60 76.20 (3.000) 74.93 (2.950) — 64 81.28 (3.200) 80.01 (3.150) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 B TOLERANCE ± .18 (±.007) ± .25 (±.010) ± .38 (±.015) Dimensions shown are for reference only. Dimensions are in millimeters (inches). 117 IDC Systems Flat Ribbon Cables .050" PITCH FLAT CABLE SERIES 179 – 26 AWG (7/34) STRANDED LL53375 E41651 PHYSICAL PROPERTIES INSULATION MATERIAL: PVC CONDUCTORS: 26 AWG, Stranded CONDUCTOR SPACING MM (IN): 1.27 (.050) ELECTRICAL PROPERTIES VOLTAGE RATING: 300V rms INSULATION RESISTANCE: >1010 Ohms IMPEDANCE: 93 Ohms CAPACITANCE @ 1 MHZ: 49.5 pF/m (15.1 pF/ft.) INDUCTANCE @ 1 MHZ: .43 µH/m (.13 µH/ft.) PROPOGATION DELAY: 4.43 nSec/m (1.35 nSec/ft.) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING : 105˚ C PACKAGING STANDARD: Splice free 100 foot rolls with UL/CSA markings on reels OPTIONAL: Other roll quantities and labeling options available. See page 129 for details. Accumulation of pitch tolerance between conductors in entire cable may not exceed tolerance of dim. “B”. TYPICAL CROSSTALK CHARACTERISTICS: 10FT Sample, 1 line driven, 1 line sensed Test Method G-S-G G-G-S-G-G Rise Time nSec 3.0 7.0 Near End (%) 5.2 3.8 Far End (%) 6.1 2.3 UL Style No. 2651 UL94VW-1 COMPLIANT Ordering Information 26 GAUGE SOLID NO. OF POS. DIMENSIONS IN MM (INCHES) A B 179-9 9 11.43 (.450) 10.16 (.400) — 10 12.70 (.500) 11.43 (.450) — 12 15.24 (.600) 13.97 (.550) 179-14 14 17.78 (.7 00) 16.51 (.650) 179-15 15 19.05 (.750) 17.78 (.700) 179-16 16 20.32 (.800) 19.05 (.750) 179-20 20 25.40 (1.000) 24.13 (.950) 179-24 24 30.48 (1.200) 29.21 (1.150) 179-25 25 31.75 (1.250) 30.48 (1.200) 179-26 26 33.02 (1.300) 31.75 (1.250) — 28 35.56 (1.400) 34.29 (1.350) 179-30 30 38.10 (1.500) 36.83 (1.450) 179-34 34 43.18 (1.700) 41.91 (1.650) 179-36 36 45.72 (1.800) 44.45 (1.750) — 37 46.99 (1.850) 45.72 (1.800) 179-40 40 50.80 (2.000) 49.53 (1.950) 179-44 44 55.88 (2.200) 54.61 (2.150) 179-50 50 63.50 (2.500) 62.23 (2.450) — 56 71.12 (2.800) 69.85 (2.750) — 60 76.20 (3.000) 74.93 (2.950) — 64 81.28 (3.200) 80.01 (3.150) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 B TOLERANCE ± .18 (±.007) ± .25 (±.010) ± .38 (±.015) Dimensions shown are for reference only. Dimensions are in millimeters (inches). 118 IDC Systems Flat Ribbon Cables .050" PITCH TPE FLAT CABLE SERIES 177 – 28 AWG STRANDED LL53375 E41651 PHYSICAL PROPERTIES INSULATION MATERIAL: TPE CONDUCTORS: 28 AWG, Stranded CONDUCTOR SPACING MM (IN): 1.27 (.050) ELECTRICAL PROPERTIES VOLTAGE RATING: 300V rms INSULATION RESISTANCE: >1010 Ohms IMPEDANCE: 96 Ohms CAPACITANCE @ 1 MHZ: 53 pF/m (16.0 pF/ft.) INDUCTANCE @ 1 MHZ: .51 µH/m (.16 µH/ft.) PROPOGATION DELAY: 4.53 nSec/m (1.38 nSec/ft.) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING : 105˚ C PACKAGING STANDARD: Splice free 100 foot rolls with UL/CSA markings on reels OPTIONAL: Other roll quantities and labeling options available. See page 129 for details. TYPICAL CROSSTALK CHARACTERISTICS: 10FT Sample, 1 line driven, 1 line sensed Test Method G-S-G G-G-S-G-G Rise Time nSec 3.0 7.0 Near End (%) 5.0 3.2 Far End (%) 6.7 2.7 Accumulation of pitch tolerance between conductors in entire cable may not exceed tolerance of dim. “B”. UL Style No. 2651 UL94VW-1 COMPLIANT Ordering Information CATALOG NUMBERS NUMBER OF CONDUCTORS DIMENSIONS IN MM (INCHES) A B 177-9 9 11.43 (.450) 10.16 (.400) 177-10 10 12.70 (.500) 11.43 (.450) 177-14 14 17.78 (.7 00) 16.51 (.650) 177-16 16 20.32 (.800) 19.05 (.750) 177-18 18 22.86 (.900) 21.59 (.850) 177-20 20 25.40 (1.000) 24.13 (.950) 177-22 22 27.94 (1.100) 26.67 (1.050) 177-24 24 30.48 (1.200) 29.21 (1.150) 177-26 26 33.02 (1.300) 31.75 (1.250) 177-34 34 43.18 (1.700) 41.91 (1.650) 177-40 40 50.80 (2.000) 49.53 (1.950) 177-50 50 63.50 (2.500) 62.23 (2.450) 177-64 64 81.28 (3.200) 80.01 (3.150) B TOLERANCE ± .18 (±.007) ± .25 (±.010) ± .38 (±.015) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 119 Mass Termination IDC Systems .050" (1.27MM) PITCH HALOGEN-FREE CABLE SERIES 199 28 AWG (7/36) STRANDED LR92984 E60980 PHYSICAL PROPERTIES WIRE SIZE AWG: 28 Stranded (7 x 36) INSULATION MATERIAL: halogen-free Polyolefin compound CONDUCTOR SPACING INCHES (MM): .050 (1.27) IMPEDANCE (Ω): 100 ± 5 Ohms CAPACITANCE (PF/FT): 15 PROPAGATION DELAY (NS/FT): 1.50 TOXICITY INDEX: 1.0 ACID GAS GENERATION: < 1% HALOGEN CONTENT: < .1 (MIL-C-24643) ELECTRICAL PROPERTIES VOLTAGE RATING (VRMS): 300 ENVIRONMENTAL PROPERTIES TEMPERATURE RATING: -40˚C TO 105°C FLAMMABILITY: VW-1 UL94VW-1 COMPLIANT NOTE: OUTER CONDUCTOR MARKED RED Ordering Information CATALOG NUMBERS NUMBER OF CONDUCTORS DIMENSIONS IN MM (INCHES) A B 199-09 9 11.43 (.450) 10.16 (.400) 199-10 10 12.70 (.500) 11.43 (.450) 199-14 14 17.78 (.700) 16.51 (.650) 199-16 16 20.32 (.800) 19.05 (.750) 199-20 20 25.40 (1.00) 24.13 (.950) 199-26 26 33.02 (1.30) 31.75 (1.25) 199-30 30 38.10 (1.50) 36.83 (1.45) 199-34 34 43.18 (1.85) 41.91 (1.65) 199-40 40 50.80 (2.00) 49.53 (1.95) 199-50 50 63.50 (2.50) 62.23 (2.45) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 120 IDC Systems High Flex Life Flat Ribbon Cables .050" PITCH HIGH FLEX LIFE FLAT CABLE SERIES 185 – 28 AWG STRANDED (19/40) STRANDED LL53375 E41651 PHYSICAL PROPERTIES INSULATION MATERIAL: PVC CONDUCTORS: 28 AWG, (19/40) Stranded CONDUCTORS SPACING MM (IN): 1.27 (.050) ELECTRICAL PROPERTIES VOLTAGE RATING: 300V rms INSULATION RESISTANCE: >1010 Ohms IMPEDANCE: 96 Ohms CAPACITANCE @ 1 MHZ: 53 pF/m (16.0 pF/ft.) INDUCTANCE @ 1 MHZ: .51 µH/m (.16 µH/ft.) PROPOGATION DELAY: 4.53 nSec/m (1.38 nSec/ft.) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING : 105˚ C FEATURES • Special 19/40 Conductor Stranding for Superior Flex Life; approx. 50 million cycles (1-1/2" loop) PACKAGING STANDARD: Splice free 100 foot rolls with UL/CSA markings on reels OPTIONAL: Other roll quantities and labeling options available. See page 129 for details. TYPICAL CROSSTALK CHARACTERISTICS: 10FT Sample, 1 line driven, 1 line sensed Test Method G-S-G G-G-S-G-G Rise Time nSec 3.0 7.0 Near End (%) 5.0 3.2 Far End (%) 6.7 2.7 UL Style No. 2651 UL94VW-1 COMPLIANT Ordering Information DIMENSIONS IN MM (INCHES) CATALOG NUMBERS NUMBER OF CONDUCTORS A B B TOLERANCE 185-09 9 11.43 (.450) 10.16 (.400) ±.18 (.007) 185-10 10 12.70 (.500) 11.43 (.450) ±.18 (.007) 185-14 14 17.78 (.700) 16.51 (.650) ±.18 (.007) 185-16 16 20.32 (.800) 19.05 (.750) ±.25 (.010) 185-18 18 22.86 (.900) 21.59 (.850) ±.25 (.010) 185-20 20 25.40 (1.000) 24.13 (.950) ±.25 (.010) 185-22 22 27.94 (1.100) 26.67 (1.050) ±.25 (.010) 185-24 24 30.48 (1.200) 29.21 (1.150) ±.25 (.010) 185-26 26 33.02 (1.300) 31.75 (1.250) ±.25 (.010) 185-34 34 43.18 (1.700) 41.91 (1.650) ±.25 (.010) 185-40 40 50.80 (2.000) 49.53 (1.950) ±.38 (.015) 185-50 50 63.50 (2.500) 62.23 (2.450) ±.38 (.015) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 121 IDC Systems Flat Ribbon Cables .050" PITCH JACKETED FLAT CABLE SERIES 174 – 28 AWG (7/36) STRANDED LL53375 E41651 PHYSICAL PROPERTIES INSULATION MATERIAL: Polyethylene with PVC Jacket CONDUCTORS: 28 AWG, Stranded CONDUCTOR SPACING MM (IN): 1.27 (.050) ELECTRICAL PROPERTIES VOLTAGE RATING: 90V rms INSULATION RESISTANCE: >1010 Ohms IMPEDANCE: 93 Ohms CAPACITANCE @ 1 MHZ: 63.0 pF/m (19.2 pF/ft.) INDUCTANCE @ 1 MHZ: .56 µH/m (.17 µH/ft.) PROPOGATION DELAY: 5.25 nSec/m (1.60 nSec/ft.) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING : 75˚ C PACKAGING STANDARD: Splice free 100 foot rolls with UL/CSA markings on reels OPTIONAL: Other roll quantities and labeling options available. See page 129 for details. TYPICAL CROSSTALK CHARACTERISTICS: 10FT Sample, 1 line driven, 1 line sensed Test Method G-S-G G-G-S-G-G Rise Time nSec 3.0 7.0 Near End (%) 4.5 4.1 Far End (%) — 2.0 UL Style No. 2604 CABLE SERIES UL94VW-1 COMPLIANT 174 DIMENSIONS IN MM (INCHES) D .86 (.034) E 4.19 (.165) Ordering Information NO. OF CONDUCTORS CABLESTRANDED SERIES 174 28 GAUGE A DIMENSIONS IN MM (INCHES) B B TOLERANCE C 9 174-09 11.43 (.450) 10.16 (.400) 10 174-10 12.70 (.500) 11.43 (.450) 14 174-14 17.78 (.700) 16.51 (.650) 20.83 (.820) 15 174-15 19.05 (.750) 17.78 (.700) 22.10 (.870) 16 174-16 20.32 (.800) 19.05 (.750) 23.37 (.920) 20 174-20 25.40 (1.000) 24.13 (.950) 28.45 (1.120) 24 174-24 30.48 (1.200) 29.21 (1.150) 33.53 (1.320) 25 174-25 31.75 (1.250) 30.48 (1.200) 26 174-26 33.02 (1.300) 31.75 (1.250) 36.07 (1.420) 34 174-34 43.18 (1.700) 41.91 (1.650) 46.23 (1.820) 36 174-36 45.72 (1.800) 44.45 (1.750) 48.77 (1.920) 37 174-37 46.99 (1.850) 45.72 (1.800) 50.04 (1.970) 40 174-40 50.80 (2.000) 49.53 (1.950) 53.85 (2.120) 44 174-44 55.88 (2.200) 54.61 (2.150) 58.93 (2.320) 50 174-50 63.50 (2.500) 62.23 (2.450) 66.55 (2.620) 56 174-56 71.12 (2.800) 69.85 (2.650) 60 174-60 76.20 (3.000) 74.93 (2.950) 79.25 (3.120) 64 174-64 81.28 (3.200) 80.01 (3.150) 84.33 (3.320) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 14.48 (.570) ± .18 (.007) ±.25 (.010) ±.38 (.015) 15.75 (.620) 34.80 (1.370) 74.17 (2.920) Dimensions shown are for reference only. Dimensions are in millimeters (inches). 122 IDC Systems Flat Ribbon Cables .050" PITCH JACKETED SHIELDED FLAT CABLE SERIES 187 – 28 AWG (7/36) STRANDED LL53375 E41651 PHYSICAL PROPERTIES INSULATION MATERIAL: PVC CONDUCTORS: 28 AWG, Stranded CONDUCTOR SPACING MM (IN): 1.27 (.050) ELECTRICAL PROPERTIES VOLTAGE RATING: 300V rms IMPEDANCE: 40 Ohms CAPACITANCE @ 1 MHZ: 164.0 pF/m (50.0 pF/ft.) PROPOGATION DELAY: 5.57 nSec/m (1.70 nSec/ft.) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING : 105˚ C PACKAGING STANDARD: Splice free 100 foot rolls with UL/CSA markings on reels OPTIONAL: Other roll quantities and labeling options available. See page 129 for details. UL Style No. 20529 UL94VW-1 COMPLIANT Ordering Information CATALOG NUMBERS NUMBER OF CONDUCTORS A DIMENSIONS IN MM (INCHES) B B TOLERANCE 187-09 9 11.43 (.450) 10.16 (.400) ± .18 (.007) 14.73 (.580) 187-10 10 12.70 (.500) 11.43 (.450) ± .18 (.007) 16.00 (.630) 187-14 14 17.78 (.700) 16.51 (.650) ±.18 (.007) 21.08 (.830) 187-15 15 19.05 (.750) 17.78 (.700) ±.25 (.010) 22.35 (.880) 187-16 16 20.32 (.800) 19.05 (.750) ±.25 (.010) 23.62 (.930) 187-20 20 25.40 (1.000) 24.13 (.950) ±.25 (.010) 28.70 (1.130) 187-24 24 30.48 (1.200) 29.21 (1.150) ±.25 (.010) 33.78 (1.330) 187-25 25 31.75 (1.250) 30.48 (1.200) ±.25 (.010) 35.05 (1.380) 187-26 26 33.02 (1.300) 31.75 (1.250) ±.25 (.010) 36.32 (1.530) 187-34 34 43.18 (1.700) 41.91 (1.650) ±.25 (.010) 46.48 (1.830) 187-36 36 45.72 (1.800) 44.45 (1.750) ±.25 (.010) 49.02 (1.930) 187-37 37 46.99 (1.850) 45.72 (1.800) ±.25 (.010) 50.29 (1.980) 187-40 40 50.80 (2.000) 49.53 (1.950) ±.38 (.015) 54.10 (2.130) 187-44 44 55.88 (2.200) 54.61 (2.150) ±.38 (.015) 59.18 (2.330) 187-50 50 63.50 (2.500) 62.23 (2.450) ±.38 (.015) 66.80 (2.630) 187-56 56 71.12 (2.800) 69.85 (2.750) ±.38 (.015) 74.42 (2.930) 187-60 60 76.20 (3.000) 74.93 (2.950) ±.38 (.015) 79.50 (3.130) 187-64 64 81.28 (3.200) 80.01 (3.150) ±.38 (.015) 84.58 (3.330) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 C ± .51 (±.02) Dimensions shown are for reference only. Dimensions are in millimeters (inches). 123 IDC Systems Flat Ribbon Cables .050" PITCH GROUND PLANE FLAT CABLE SERIES 196 – 28 AWG (7/36) STRANDED LL53375 E41651 PHYSICAL PROPERTIES INSULATION MATERIAL: PVC CONDUCTORS: 28 AWG (7/36), Stranded CONDUCTOR SPACING MM (IN): 1.27 (.050) ELECTRICAL PROPERTIES VOLTAGE RATING: 300V rms IMPEDANCE: 66 Ohms CAPACITANCE @ 1 MHZ: 95.0 pF/m (29.0 pF/ft.) PROPOGATION DELAY: 6.07 nSec/m (1.85 nSec/ft.) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING : 105˚ C UL Style No. 20218 UL94VW-1 COMPLIANT Ordering Information DIMENSIONS IN MM (INCHES) CATALOG NUMBERS NUMBER OF CONDUCTORS A ±2.54 (.10) B B TOLERANCE 196-14 14 24.13 (.95) 16.51 (.650) ±.25 (.007) 196-20 20 31.75 (1.25) 24 13 (.950) ±.25 (.010) 196-25 25 38.10 (1.50) 30.48 (1.200) ± .25 (.010) 196-26 26 39.37 (1.55) 31.75 (l 250) ±.25 (.010) 196-34 34 49.53 (1.95) 41.91 (1.650) ±.25 (.010) 196-37 37 53.34 (2.10) 45.72 (1.800) ±.38 (.015) 196-40 40 57.15 (2.25) 49.53 (1.950) ±.38 (.015) 196-50 50 69.85 (2.75) 62.23 (2.450) ± .38 (.015) 196-60 60 82.55 (3.25) 74.93 (2.950) ±.38 (.015) 196-64 64 87.63 (3.45) 80.01 (3.150) ±.38 (.015) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 124 IDC Systems Flat Ribbon Cables .050" PITCH TWISTED PAIR FLAT CABLE SERIES 200 – 28 AWG (7/36) STRANDED LL53375 E41651 PHYSICAL PROPERTIES INSULATION MATERIAL: PVC CONDUCTORS: 28 AWG (7/36), Stranded CONDUCTOR SPACING MM (IN): 1.27 (.050) ELECTRICAL PROPERTIES VOLTAGE RATING: 300V rms IMPEDANCE: 100 Ohms CAPACITANCE @ 1 MHZ: (16.0 pF/ft.) PROPOGATION DELAY: (1.56 nSec/ft.) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING : 80˚ C TYPICAL CROSSTALK CHARACTERISTICS: 10FT Sample, 1 line driven, 1 line sensed Test Method G-S-G G-G-S-G-G Rise Time nSec 3.0 7.0 Near End (%) 6.3 3.8 Far End (%) 7.5 4.0 UL Style No. 20634 UL94VW-1 COMPLIANT NOTES: 1. Adjacent pairs are twisted in opposite direction. 2. Color code: Alternating brown, red, orange, yellow, green, blue, violet, gray, white, black, then repeated. Each color lead paired with a tan (common). 3. This cable is listed under U.L. style #20634 at 300V and 80˚ C. Ordering Information CATALOG NUMBERS NUMBER OF CONDUCTORS (PAIRS) DIMENSIONS IN MM (INCHES) C 200-10A 10 (5) 11.43 ± 0.08 (0.45 ± 0.010) 12.29 ± 0.40 (.484 ± 0.016) 200-14A 14 (7) 16.51 ± 0.25 (0.65 ± 0 010) 17.37 ± 0.40 (.684 ± 0.016) 200-16A 16 (8) 19.05 ± 0.25 (0.75 ± 0.010) 19.91 ± 0.40 (.784 ± 0.016) 200-20A 20 (10) 24.13 ± 0.25 (0.95 ± 0.010) 24.99 ± 0.40 (.984 ± 0.016) 200-24A 24 (12) 29.21 ± 0.25 (1.15 ± 0.010) 30.07 ± 0.40 (1.184 ± 0.016) 200-26A 26 (13) 31.75 ± 0.25 (1.25 ± 0.010) 32.61 ± 0.40 (1.284 ± 0.016) 200-34A 34 (17) 41.91 ± 0.35 (1.65 ± 0.014) 42.77 ± 0.53 (1.684 ± 0.021) 200-36A 36 (18) 44.45 ± 0.35 (1.75 ± 0.014) 45.31 ± 0.53 (1.784 ± 0.021) 200-40A 40 (20) 49.53 ± 0.35 (1.95 ± 0.014) 47.85 ± 0.53 (1.884 ± 0.021) 200-50A 50 (25) 62.23 ± 0.35 (2.45 ± 0.014) 63.09 ± 0.53 (2.484 ± 0.021) 200-60A 60 (30) 74.93 ± 0.35 (2.95 ± 0.014) 75.79 ± 0.53 (2.984 ± 0.021) 200-64A 64 (32) 80.01 ± 0.35 (3.15 ± 0.014) 80.87 ± 0.53 (3.184 ± 0.021) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 D Dimensions shown are for reference only. Dimensions are in millimeters (inches). 125 IDC Systems Flat Ribbon Cables .050" PITCH COLOR CODED FLAT CABLE SERIES 201 – 28 AWG (7/36) STRANDED SERIES 202 – 26 AWG SOLID LL53375 E41651 PHYSICAL PROPERTIES 201 202 INSULATION MATERIAL: CONDUCTORS: CONDUCTOR SPACING MM (IN): PVC 28 AWG, Stranded 1.27 (.050) PVC 26 AWG, Solid 300V rms >1010 Ohms 100 Ohms (14.0 pF/ft.) (.14 µH/ft.) (1.38 nSec/ft.) 300V rms >1010 Ohms 103 Ohms (13.5 pF/ft.) (.14 µH/ft.) (1.38 nSec/ft.) ELECTRICAL PROPERTIES VOLTAGE RATING: INSULATION RESISTANCE: IMPEDANCE: CAPACITANCE @ 1 MHZ: INDUCTANCE @ 1 MHZ: PROPOGATION DELAY: ENVIRONMENTAL PROPERTIES TEMPERATURE RATING : 105˚ C 105˚ C TYPICAL CROSSTALK CHARACTERISTICS: 10FT Sample, 1 line driven, 1 line sensed Test Method G-S-G G-G-S-G-G Rise Time nSec 3.0 7.0 Near End (%) 5.0 3.2 Far End (%) 6.7 2.7 UL Style No. 20067 UL94VW-1 COMPLIANT Ordering Information SERIES 201 28 GAUGE STRANDED SERIES 202 26 GAUGE SOLID 9 201-9 – Brown 10 201-10 Red 14 201-14 3 Orange 15 201-15 4 Yellow 16 201-16 5 Green 20 6 Blue 7 8 9 WIRE COLOR SEQUENCE (REPEAT CONDUCTOR NUMBERS) CONDUCTOR COLOR NUMBER 1 2 10 NUMBER OF CONDUCTORS DIMENSIONS IN MM (INCHES) A B 11.43 (.450) 10.16 (.400) – 12.70 (.500) 11.43 (.450) 202-14 17.78 (.700) 16.51 (.650) – 19.05 (.750) 17.78 (.700) 20.32 (.800) 19.05 (.750) 201-20 – 25.40 (1.000) 24.13 (.950) 24 201-24 202-24 30.48 (1.200) 29.21 (1.150 Violet 25 201-25 – 31.75 (1.250) 30.48 (1.200) Gray 26 201-26 – 33.02 (1.300) 31.75 (1.250) White 34 201-34 43.18 (1.700) 41.91 (1.650) Black 36 201-36 202-36 45.72 (1.800) 44.45 (1.750) 37 201-37 – 46.99 (1.850) 45.72 (1.800) 40 201-40 – 50.80 (2.000) 49.53 (1.950) 44 201-44 – 55.88 (2.200) 54.61 (2.150 50 201-50 202-50 63.50 (2.500) 62.23 (2.450i 56 201-56 – 71.12 (2.800) 69.85 (2.750) 60 201-60 – 76.20 (3.000) 74.93 (2.950 64 201-64 81.28 (3.200) 80.01 (3.150) NOTES: Unless otherwise specified: 1. 202-XX to be used with micro-ribbon connectors, catalog numbers 622-XXM, F or FA. Consult factory for use with other connectors. Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 126 IDC Systems Flat Ribbon Cables .050" PITCH ROUND-TO-FLAT CABLE SERIES 300 – 28 AWG (7/36) STRANDED—SHIELDED SERIES 301 – 28 AWG (7/36) STRANDED—NON-SHIELDED LL53375 E41651 PHYSICAL PROPERTIES 300 301 INSULATION MATERIAL: CONDUCTORS: CONDUCTOR SPACING MM (IN): PVC 28 AWG, Stranded—Shielded 1.27 (.050) PVC 28 AWG, Stranded—Non-Shielded 300V rms 57 Ohms 92.2 pF/m (36.3 pF/ft.) .30 µH/m (.120 µH/ft.) 4.5 nSec/m (1.79 nSec/ft.) 2.25" 300V rms 63 Ohms 80.5 pF/m (31.7 pF/ft.) .33 µH/m (.129 µH/ft.) 4.4 nSec/m (1.73 nSec/ft.) 2.25" ELECTRICAL PROPERTIES VOLTAGE RATING: IMPEDANCE: CAPACITANCE @ 1 MHZ: INDUCTANCE @ 1 MHZ: PROPOGATION DELAY: DISTANCE BETWEEN FLAT SECTIONS: ENVIRONMENTAL PROPERTIES TEMPERATURE RATING : 80˚ C 80˚ C PACKAGING STANDARD: Splice free 100 foot rolls with UL/CSA markings on reels OPTIONAL: Other roll quantities and labeling options available. See page 129 for details. UL Style No. 20267 UL94VW-1 COMPLIANT FEATURES • PVC jacket prevents damage in external applications • Round cross-section allows maximum system airflow • Shielding braid provides EMI / RFI protection • Alternating flat and slit sections along cable length allow mass termination of IDC connector without the need for lamination or lacing equipment Ordering Information NO. OF CONDUCTORS 9 10 14 15 16 20 24 25 26 30 34 36 37 40 50 60 64 SHIELDED CABLE 300-09 300-10 300-14 300-15 300-16 300-20 300-24 300-25 300-26 300-30 300-34 300-36 300-37 300-40 300-50 300-60 300-64 DIMENSIONS IN MM (INCHES) A B C 7.0 (0.27) 11.43 (0.45) 0.8 (0.03) 7.0 (0.27) 12.70 (0.50) 0.8 (0.03) 7.5 (0.29) 17.78 (0.70) 0.8 (0.03) 7.5 (0.29) 19.05 (0.75) 0.8 (0.03) 8.4 (0.33) 20.30 (0.80) 0.8 (0.03) 8.5 (0.33) 25.40 (1.00) 0.8 (0.03) 9.2 (0.36) 30.48 (1.20) 0.8 (0.03) 9.2 (0.36) 31.75 (1.25) 0.8 (0.03) 9.8 (0.39) 33.02 (1.30) 0.8 (0.03) 9.8 (0.39) 38.10 (1.50) 0.8 (0.03) 10.5 (0.41) 43.20 (1.70) 0.8 (0.03) 10.6 (0.42) 45.72 (1.80) 0.8 (0.03) 10.6 (0.42) 47.00 (1.85) 1.0 (0.04) 11.3 (0.44) 50.80 (2.00) 1.0 (0.04) 11.6 (0.45) 63.50 (2.50) 1.0 (0.04) 13.0 (0.51) 76.20 (3.00) 1.0 (0.04) 13.5 (0.53) 81.30 (3.20) 1.0 (0.04) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 NON-SHIELDED CABLE 301-09 301-10 301-14 301-15 301-16 301-20 301-24 301-25 301-26 301-30 301-34 301-36 301-37 301-40 301-50 301-60 301-64 DIMENSIONS IN MM (INCHES) A B C 6.5 (0.26) 11.43 (0.45) 0.8 (0.03) 6.5 (0.26) 12.70 (0.50) 0.8 (0.03) 7.0 (0.28) 17.78 (0.70) 0.8 (0.03) 7.0 (0.28) 19.05 (0.75) 0.8 (0.03) 7.9 (0.31) 20.30 (0.80) 0.8 (0.03) 8.0 (0.31) 25.40 (1.00) 0.8 (0.03) 7.7 (0.30) 30.48 (1.20) 0.8 (0.03) 7.7 (0.30) 31.75 (1.25) 0.8 (0.03) 9.3 (0.37) 33.02 (1.30) 0.8 (0.03) 9.3 (0.37) 38.10 (l.50) 0.8 (0.03) 10.0 (0.39) 43.20 (1.70) 0.8 (0.03) 10.1 (0.40) 45.72 (1.80) 0.8 (0.03) 10 .1 (0.40) 47.00 (1.85) 0.8 (0.03) 10.8 (0.43) 50.80 (2.00) 1.0 (0.04) 11.1 (0.44) 63.50 (2.50) 1.0 (0.04) 12.5 (0.49) 76.20 (3.00) 1.0 (0.04) 13.0 (0.51) 81.30 (3.20) 1.0 (0.04) Dimensions shown are for reference only. Dimensions are in millimeters (inches). 127 IDC Systems Mass Termination PREPARED (VALVE ADDED) .050" PITCH ROUND-TO-FLAT CABLE SERIES 203 – 28 AWG (7/36) STRANDED—NON-TWISTED PAIR SERIES 204 – 28 AWG (7/36) STRANDED—TWISTED PAIR 20X - XX - XX00 - X LL53375 E41651 3 – Non-Twisted 4 – Twisted Pair UL94VW-1 COMPLIANT # of Conductors (See Below) UL Style No. 2517 Length In Whole Inches 1 – Shielded 2 – Unshielded *Length In Feet 02 – 2 ft long 05 – 5 ft long 10 – 10 ft long “Spread Pitch Lamination” PITCH TYP. ACCUMULATION OF PITCH TOLERANCE BETWEEN CONDUCTORS IN ENTIRE CABLE MAY NOT EXCEED TOLERANCE OF DIMENSION Pn. SERIES 203 NON-TWISTED ROUND-TO-FLAT CABLE SERIES 204 TWISTED PAIR ROUND-TO-FLAT CABLE DIMENSIONS “A” DIAMETER POSITIONS (PAIRS) Pn DIMENSIONS W .190 9 10.16 (0.40) 11.02 (.434) .245 14 16.51 (0.65) 17.37 (.684) “A” DIAMETER POSITIONS (PAIRS) Pn W .250 15 17.78 (0.70) 18.64 (.734) .225 10 11.43 (0.45) 12.29 (.484) .255 16 19.05 (0.75) 19.91 (.784) .280 14 16.51 (0.65) 17.37 (.684) .275 20 24.13 (0.95) 24.99 (.984) .290 16 19.05 (0.75) 19.91 (.784) .290 24 29.21 (1.15) 30.07 (1.18) .315 20 24.13 (0.95) 24.99 (.984) .295 25 30.48 (1.20) 31.34 (1.23) 26 31.75 (1.25) 32.61 (1.28) .320 24 29.21 (1.15) 30.07 (1.18) .300 .330 26 31.75 (1.25) 32.61 (1.28) .330 34 41.91 (1.65) 42.77 (1.68) .365 34 41.91 (1.65) 42.77 (1.68) .335 36 44.45 (1.75) 45.31 (1.78) .370 36 44.45 (1.75) 45.31 (1.78) .340 37 46.74 (1.80) 46.58 (1.83) .375 40 49.53 (1.95) 47.85 (1.88) .345 40 49.53 (1.95) 47.85 (1.88) .425 50 62.23 (2.45) 63.09 (2.48) .385 50 62.23 (2.45) 63.09 (2.48) .480 64 80.01 (3.15) 81.28 (3.20) .440 64 80.01 (3.15) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 128 IDC Systems Mass Termination OPTIONAL PACKAGING AND LABELING FOR T&B FLAT CABLE Reel Style: Blank—Std. Rolls TB—Tail Option Reel Length: Blank—100 Foot 300—300 Foot AAA - BBB - CCC - DDD - EE Cable Series Labeling: Blank—UL/CSA on reel label only CSA—UL and CSA marking continuously marked on cable # of Positions Standard TB CSA CSATB Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 129