Document 485-1 Chip Inductors – 0603CT (1608) • Very low profile – only 60% of the height of our other 0603 inductor series • Excellent Q, low DCR and very high SRF Designer’s Kit C423 contains 10 each of all stocked 5% values and Designer’s Kit C423-2 contains 10 each of all 2% values. Inductance2Percent 900 MHz 1.7 GHz 1 3 4 Part number (nH) tolerance L typ Q typ L typ Q typ4 0603CT-1N0XJL_1.0 0603CT-1N2XJL_1.2 0603CT-2N0XJL_2.0 0603CT-2N2XJL_2.2 0603CT-2N3XJL_2.3 0603CT-2N5XJL_2.5 0603CT-3N0X_L_3.0 0603CT-3N3X_L_3.3 0603CT-3N6X_L_3.6 0603CT-3N9X_L_3.9 0603CT-4N3X_L_4.3 0603CT-4N7X_L_4.7 0603CT-5N1X_L_5.1 0603CT-5N6X_L_5.6 0603CT-6N8X_L_6.8 0603CT-7N2X_L_7.2 0603CT-8N2X_L_8.2 0603CT-9N5X_L_9.5 0603CT-10NX_L_10 0603CT-11NX_L_11 0603CT-12NX_L_12 0603CT-15NX_L_15 0603CT-16NX_L_16 0603CT-18NX_L_18 0603CT-20NX_L_20 0603CT-22NX_L_22 0603CT-24NX_L_24 0603CT-27NX_L_27 0603CT-30NX_L_30 0603CT-33NX_L_33 0603CT-36NX_L_36 0603CT-39NX_L_39 0603CT-43NX_L_43 0603CT-47NX_L_47 0603CT-51NX_L_51 0603CT-56NX_L_56 5 5 5 5 5 5 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 0.98 1.18 1.98 2.10 2.27 2.48 2.96 3.27 3.58 3.87 4.26 4.66 5.12 5.60 6.78 7.19 8.18 9.52 10.0 11.0 12.0 15.2 16.3 18.1 20.2 22.4 24.4 27.4 30.5 34.0 37.2 40.3 44.5 48.2 53.0 59.4 1. When ordering, specify tolerance, termination and packaging codes: 0603CT-56NXGLW Tolerance: G=2% J = 5% (Table shows stock tolerances in bold.) Termination:L=RoHS compliant silver-palladium-platinum-glass frit. E=Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging:W =7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). U=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead. 39 35 46 50 55 52 57 60 69 68 58 50 68 67 60 65 60 63 67 66 68 65 63 66 67 60 61 62 62 55 61 60 57 55 55 54 0.99 1.19 1.98 2.13 2.28 2.50 2.97 3.33 3.63 3.95 4.34 4.75 5.18 5.73 7.00 7.44 8.46 9.92 10.4 11.5 12.7 16.1 17.5 19.2 21.6 24.3 26.5 29.8 33.9 39.1 42.3 45.3 51.3 57.8 63.2 75.4 58 50 70 74 81 77 82 83 95 90 84 70 93 90 81 88 78 80 85 86 85 80 76 80 80 70 72 75 73 61 63 65 60 57 55 48 SRFDCR max6 Irms7 (GHz)(Ohms) (mA) typ5 16.0 0.0451600 16.0 0.1051100 12.0 0.0341900 10.7 0.0461600 11.0 0.0461600 11.0 0.0601300 10.7 0.0391600 7.00 0.0391600 7.00 0.0441600 6.30 0.0501400 6.30 0.0761300 5.600.120 960 5.50 0.0501400 5.05 0.0581300 4.50 0.0801200 4.50 0.0471500 4.25 0.0751300 3.95 0.0921100 3.95 0.0751300 4.00 0.1101000 3.500.130 920 3.300.145 800 3.100.175 760 2.950.200 720 2.900.175 760 2.750.220 700 2.700.240 680 2.550.270 670 2.450.330 600 2.200.330 600 2.300.335 600 2.250.400 570 2.100.440 530 1.900.540 470 1.850.570 440 1.750.700 420 2. Inductance measured at 250 MHz, 0.1 Vrms, 0 Adc using Coilcraft SMDA fixture in Agilent/HP 4287A impedance analyzer. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured using Agilent/HP4291A with Agilent/HP 16193 test fixture. 5. SRF measured using Agilent/HP 8722ES network analyzer and Coilcraft SMD‑D test fixture. 6. DCR measured on Cambridge Technology micro-ohmmeter and Coilcraft CCF858 test fixture. 7. Current that causes a 15°C temperature rise from 25°C ambient. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 485-1 Revised 02/19/13 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 485-2 0603CT Series (1608) Typical L vs Frequency Typical Q vs Frequency 100 100 90 90 10 nH 80 18 nH 27 nH 56 nH 70 70 60 60 50 Q Factor Inductance (nH) 80 39 nH 40 30 20 18 nH 20 10 10 nH 5.6 nH 10 10 100 1000 10000 56 nH 40 27 nH 1 39 nH 50 30 0 5.6 nH 0 1 10 Frequency (MHz) Typical Irms Derating 1000 10000 Designer’s Kit C423 contains 10 each of all 5% values; Designer’s Kit C423-2 contains 10 each of all 2% values 120 Core material Ceramic 110 Environmental RoHS compliant, halogen free optional 100 Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. 90 Weight 160 – 190 mg 80 Ambient temperature –40°C to +125°C with Irms current, +125°C to +140°C with derated current 70 Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C 60 50 40 Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles 30 Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C 25°C Percent of rated Irms 100 Frequency (MHz) 20 Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) 10 0 -40 -20 0 20 40 60 80 100 120 140 Ambient temperature (°C) B overall Packaging 2000/7″reel; Paper tape: 8 mm wide, 0.68 mm thick, 4 mm pocket spacing H C Pick and place material D Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. G F A D E terminal A max B max G Terminal wraparound: approx 0.006/0,15 both ends C max D E F Recommended Land Pattern G H 0.0640.033 0.0240.0130.0300.0250.0250.040 inches 1,630,84 0,610,330,760,640,641,02 mm Note: Height dimension (C) is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 485-2 Revised 02/19/13 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.