EMCORE 6000-0JE2

J-Type Medallion 6000 1550 nm
Externally Modulated Transmitter
DATASHEET | JULY 2012
FIBER OPTICS
The J-Type Medallion 6000 Series
Applications
High Performance Supertrunking Links
High Power Distribution Networks
Redundant Ring Architectures
FTTx Networks
RFOG Applications
This product line is a family of state-of-the-art high performance 1550 nm
externally modulated CATV fiber optic transmitters optimized for varying network
applications. Packaged in convenient 1RU housing, this line of optical transmitters
couples high optical output powers, up to 10.0 dBm, with low optical line width
resulting in unmatched performance. The optical modulator, combined with
proprietary pre-distortion circuitry, provides superior CTB and CSO performance
with SBS suppression levels of greater than 17 dBm for SAT-IF applications.
Advanced features such as built in field adjustable SBS control allow these
transmitters to be quickly optimized in the field for any link or application without
the need to procure specifically tuned transmitters. This affords the system
designer a level of flexibility previously unknown in the CATV market place.
SAT-IF Transport
The J-Type series are designed as a high performance solution for applications
where the simultaneous transport of CATV and SAT-IF FM signals is required.
The SAT-IF signals can be applied anywhere in the 950 to 2800 MHz band.
DWDM Node Splitting
Features
Single or Dual Optical Outputs
QAM Loading to 1003 MHz
J-Type transmitters are specially designed and optimized to support optical fiber
links of up to 150kms for the Japanese market place.
Dual Power Supplies, Redundant &
Hot Swappable
.
Front Panel RF Test Point
Vacuum Fluorescent Status Display
OMI / RF Gain Adjustment
AGC Select: CW, Video, Manual
(No AGC)
Industry Leading Field Adjustable
SBS Suppression
| REV 2012.07
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
J-Type Medallion 6000 1550 nm
Externally Modulated Transmitter
FIBER OPTICS
DATASHEET | JULY 2012
Optical Characteristics
Property
Performance (note 1-8)
Specified Link Length
Units
L (km)
Channel Plan
Models
6000-J01
6000-J02
25
25
NTSC 80-Ch
PAL 60-Ch
Optical Output Power
Po (dBm)
8.5/8.5
8.5/8.5
Noise Bandwidth
BW (MHz)
4
5
SBS Suppression
(dBm)
15.0
15.0
Comments
With 36 QPSK carriers from 950 to
2800 MHz
Min. 10 dBm version avail. See Chart
Min.
CATV Carrier to Noise Ratio
CNR (dB)
51.0
51.0
Min.
CATV Composite Second Order
CSO (dBc)
-65
-65
Max. Port 1
CATV Composite Triple Beat
CTB (dBc)
-65
-65
Max. @ +25C
CATV Composite Triple Beat
CTB (dBc)
-64
-64
Max. @ 0 C to 50 C
SAT-IF Carrier to Noise Ratio
CNR (dB)
27
27
Min.
SAT-IF Intermodulation Products
(dBc)
-35
-35
Max. Port 1
SAT-IF Spurious Products
(dBc)
-38
-38
Max.
o
o
Notes:
1. Unless stated otherwise all specifications apply over full temperature range with no digital loading.
2. Unless stated otherwise specifications apply for nominal RF input level as defined below, after a 30 minute stabilization
period.
3. Specifications separated by a slash are port1 / port 2.
4. Units are tested per the Test / Link Configuration Table
5. Noise figure for the EDFA = 4.5 ~ 5.5 dB
6. Corning SMF-28 single mode fiber
7. Receiver responsivity is 0.95 mA/mW, Equivalent noise current is 7 pA/(Hz)1/2
8. With 36 QPSK modulated SAT-IF signals between 950 … 2800 MHz. 27 MHz IF bandwidth
Test/Link Configuration
Property
J-Type
EDFA
14 dBm
Link
25 Km
Received Power2
0.0 dBm at the receiver
| REV 2012.07
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
J-Type Medallion 6000 1550 nm
Externally Modulated Transmitter
FIBER OPTICS
DATASHEET | JULY 2012
Electrical Specifications
Property
Requirement
Comments
CATV Nominal Input Power
19 dBmV/ch (79 dBuV/ch)
80 NTSC channels
CATV Input Range
17 – 27 dBmV/ch (77 – 87 dBuV/ch)
Optimum performance at nominal input
CATV Composite Level
-10.9 dBm
0 dB on FP Display
CATV RF Gain / OMI Adjustment
Range
+2 / -8 dB from nominal setting
CATV Performance may vary slightly over
range
CATV Frequency Range
45MHz – 1003 MHz
CATV Flatness
+/- 0.50 dB
+/- 0.75 dB
45MHz – 1003 MHz
CATV Flatness – N-Type
+/- 0.75 dB
45MHz – 1003 MHz N-Type
CATV Input impedance
75
CATV Input Return Loss
16dB min
CATV Front Panel RF Tap
-20 +/- 1 dB down from RF input
45MHz - 550MHz
45MHz – 1003 MHz
CATV Front Panel RF Tap Flatness
+/- 1 dB
45MHz – 1003 MHz
SAT Nominal Input Power
27 dBmV/ch (87 dBuV/ch)
36 QPSK SAT-IF channels
SAT Input Range
22 – 32 dBmV/ch (82 – 92 dBuV/ch)
Optimum performance at nominal input
SAT Composite Level
-6.2 dBm
0 dB on FP Display
SAT-IF RF Gain / OMI Adjustment
Range
+5 / -5 dB from nominal setting
CATV Performance can vary slightly
SAT-IF Frequency Range
950MHz – 2800 MHz
SAT-IF Flatness
+/- 2 dB
SAT-IF Input impedance
75
SAT-IF Input Return Loss
10dB min
SAT-IF Front Panel RF Tap
7 +/- 2.5 dBmV/Ch at Nominal OMI/ch
SAT-IF Front Panel RF Tap Flatness
+/- 1 dB
950MHz – 2800 MHz
950MHz – 2800 MHz
General and Mechanical Specifications
Property
Requirement
Wavelength
1550 +/-5 nm
Channel Plan
Various – See Specification Tables
Optical Connector
Monitoring Interfaces
SC/APC
100 Base-T Ethernet (SNMP)
Rear Panel RS-232 interface
VFD Screen Front Panel Controls
Operating Temperature
0C to 50C
Storage Temperature
-20C to 70C
65W max
Power Consumption
Comments
Various Options + ITU-grid available – see
Model Number Information
Custom channel plans available
Other styles available
VFD- (Vacuum Fluorescent Display)
| REV 2012.07
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
J-Type Medallion 6000 1550 nm
Externally Modulated Transmitter
FIBER OPTICS
DATASHEET | JULY 2012
General and Mechanical Specifications (continued)
Property
Requirement
Comments
Transportation Vibration
EMI:
EN50083-2:2006 (US CATV)
EN55022:2006 (US IT)
EN61000-3-2 (Harmonics)
EN61000-3-3 (Flicker)
FCC: Part 15, Subpart B, class “A” Unintentional
Radiators
ICES-003 (Canada)
AN/NZS 3548, Class A (Australia)
VCCI, Class A (Japan)
GR-2853-CORE
Transportation Shock
GR-2853-CORE
In Shipping package
20% to 85%
90 to 265 VAC, 50/60 Hz
Non-condensing
Agency Listings
Operating Humidity
Supply Range
(VAC)
(VDC)
Dimensions
Safety:
FDA/CDRH Laser Safety Governed by Code
of Federal Regulations Title 21, Volume 8,
Part 1040
IEC 60950-1
IEC 60728-11
Laser IEC 60825-1
CB Certification
In Shipping package
+/- (36 – 72) VDC
19.0”W x 15.0”D x 1.72”H
(width includes 19” front panel ears, depth
includes, connectors, fans & front panel) – see
drawing
Laser Safety Information
This product meets the applicable requirements of 21 CFR 1010 & 1040 and is classified as a class 1M
laser product. During use as intended, the laser energy is fully contained within the fiber network
such that there is no accessible laser radiation. This product has been issued accession number 0820466-001.
| REV 2012.07
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
J-Type Medallion 6000 1550 nm
Externally Modulated Transmitter
FIBER OPTICS
DATASHEET | JULY 2012
Model Number InformationNote 3
6000 –
□□□ □-□ □□□□
Logo &
Customer
Specific
Link type
Pout (dBm min) Note 1
Loading
Type
Optics
0–
EMCORE
Logo
J – 25 km
Note 4
D – 10/10 for S and J Type
1 – NTSC
(80-ch)
1 – SC/APC, Rear
E – 8.5/8.5 for J Type
2 – PAL
(60-ch)
2 – FC/APC, Rear
1 – no Logo
3 – E2000/APC,
Rear
4 – SC/APC,
Front
5 – FC/APC,
Front
RF
1 – RF IN
Rear, TP
Front
2 – RF IN
Front, TP
Front
3 – RF IN
Front, TP
Rear
4 – RF IN
Rear, TP
Rear
Wavelength
(nm)
Power Supply
00 –1555+/5.0nm
1 – AC primary,
no secondary
01 – 1550+/5.0nm
2 – DC primary,
no secondary
xx – ITU
Channel +/Note 2
0.1nm
3 – AC primary,
AC secondary
4 – AC primary,
DC secondary
5 – DC primary,
DC secondary
6 – E2000/APC,
Front
Note 1: Options available for Indicated Types only.
Note 2: ITU grid wavelengths can be specified from channel 18 to 40.
Note 3: Not all configurations are available, contact factory.
Note 4: CSO port 2 degraded by 1dB
Note 5: Contact Factory for Model type availability
Additional Kits
G3708-006-001 - Replaceable AC power supply modules
G3708-005-001 - Replaceable DC power supply modules
G7914-076-001 - Replaceable Blank power module plate
G7906-008-001 - Replaceable fans
| REV 2012.07
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.