Document 537 -1 Chip Inductors – 0603HP Series (1608) • • • • B overall Higher Q and lower DCR than other 0603 inductors Highest SRF values – as high as 16 GHz Excellent current handling capability – up to 2100 mA 54 inductance values from 1.8 to 390 nH A Core material Ceramic Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. E terminal C H D F I G J F I Recommended Land Pattern Terminal wraparound: approx 0.01/0,24 both ends Weight 2.0 – 3.2 mg Storage temperature Component: –40°C to +140°C. Packaging: –40°C to +80°C A B C max min – max max D E F G H I J 0.069 0.034 – 0.043 0.034 0.015 0.029 0.013 0.038 0.040 0.027 0.028 inches 1,75 Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles 0,96 1,02 0,69 0,71 mm 100 Percent of rated Irms PCB washing Only pure water or alcohol recommended 0,38 0,74 0,33 120 110 Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Packaging 2000 per 7″ reel. Paper tape: 8 mm wide, 1 mm thick, 4 mm pocket spacing 0,86 Current Derating Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 0,86 – 1,09 90 80 70 60 50 40 30 25°C Ambient temperature –40°C to +125°C with Irms current, +125°C to +140°C with derated current 20 10 0 -40 -20 0 20 40 60 80 100 120 140 Ambient temperature (°C) Typical Q vs Frequency Typical L vs Frequency 160 1000 330 nH 10 nH 140 150 nH 82 nH Inductance (nH) Q Factor 120 100 24 nH 80 51 nH 82 nH 150 nH 60 100 51 nH 24 nH 10 nH 10 330 nH 40 20 0 1 10 100 1000 10000 10 100 Frequency (MHz) Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2009 1000 10000 Frequency (MHz) Document 537-1 Revised 05/18/09 Document 537-2 0603HP Series (1608) Part number1 0603HP-1N8XJL_ 0603HP-2N2XJL_ 0603HP-3N3X_L_ 0603HP-3N6X_L_ 0603HP-3N9X_L_ 0603HP-4N3X_L_ 0603HP-4N7X_L_ 0603HP-5N1X_L_ 0603HP-5N6X_L_ 0603HP-6N0X_L_ 0603HP-6N8X_L_ 0603HP-7N2X_L_ 0603HP-7N5X_L_ 0603HP-8N2X_L_ 0603HP-8N7X_L_ 0603HP-9N1X_L_ 0603HP-9N5X_L_ 0603HP-10NX_L_ 0603HP-11NX_L_ 0603HP-12NX_L_ 0603HP-15NX_L_ 0603HP-16NX_L_ 0603HP-18NX_L_ 0603HP-22NX_L_ 0603HP-23NX_L_ 0603HP-24NX_L_ 0603HP-27NX_L_ 0603HP-30NX_L_ 0603HP-33NX_L_ 0603HP-36NX_L_ 0603HP-39NX_L_ 0603HP-43NX_L_ 0603HP-47NX_L_ 0603HP-51NX_L_ 0603HP-56NX_L_ 0603HP-68NX_L_ 0603HP-72NX_L_ 0603HP-75NX_L_ 0603HP-82NX_L_ 0603HP-91NX_L_ 0603HP-R10X_L_ 0603HP-R11X_L_ 0603HP-R12X_L_ 0603HP-R15X_L_ 0603HP-R18X_L_ 0603HP-R20X_L_ 0603HP-R21X_L_ 0603HP-R22X_L_ 0603HP-R25X_L_ 0603HP-R27X_L_ 0603HP-R30X_L_ 0603HP-R33X_L_ 0603HP-R36X_L_ 0603HP-R39X_L_ Inductance2 Percent (nH) tol 1.8 5 2.2 5 3.3 5,2 3.6 5,2 3.9 5,2 4.3 5,2 4.7 5,2 5.1 5,2 5.6 5,2 6.0 5,2 6.8 5,2 7.2 5,2 7.5 5,2 8.2 5,2 8.7 5,2 9.1 5,2 9.5 5,2 10 5,2 11 5,2 12 5,2 15 5,2 16 5,2 18 5,2 22 5,2 23 5,2 24 5,2 27 5,2 30 5,2 33 5,2 36 5,2 39 5,2 43 5,2 47 5,2 51 5,2 56 5,2 68 5,2 72 5,2 75 5,2 82 5,2 91 5,2 100 5,2 110 5,2 120 5,2 150 5,2 180 5,2 200 5,2 210 5,2 220 5,2 250 5,2 270 5,2 300 5,2 330 5,2 360 5,2 390 5,2 Designer’s Kits C406A and B contain 10 each of all 5% values Designer’s Kits C406A-2 and B-2 contain 10 each of all 2% values L test Q typ freq at (MHz) 250 MHz 250 23 250 13 250 32 250 40 250 35 250 30 250 26 250 40 250 48 250 49 250 42 250 48 250 41 250 46 250 46 250 40 250 49 250 49 250 41 250 37 250 48 250 45 250 41 250 44 250 40 250 42 250 44 250 49 250 45 250 44 250 48 250 45 200 47 200 49 200 50 200 46 150 46 150 46 150 45 150 45 150 49 150 47 150 47 150 47 100 48 100 47 100 48 100 47 100 45 100 46 100 47 100 46 100 47 100 47 900 MHz L typ Q typ3 1.77 40 2.14 25 3.28 67 3.59 70 3.88 68 4.29 58 4.65 48 5.08 84 5.60 87 5.92 94 6.83 88 7.25 96 7.55 81 8.21 96 8.73 97 9.18 76 9.56 98 10.16 90 11.06 78 12.26 69 15.41 83 16.37 77 18.56 76 22.7 77 24.0 69 24.9 77 28.4 74 31.5 82 34.9 76 38.5 69 41.5 78 45.7 83 50.6 77 54.6 73 60.3 74 75.5 73 80.8 69 84.6 71 94.0 62 103.0 64 114.0 69 126.2 63 142.4 61 188.8 57 232.2 50 265.0 47 288.0 45 315.0 41 — — — — — — — — — — — — 1. When ordering, please specify tolerance, termination and packaging codes: 0603HP-R39XJLW Tolerance: G = 2% J = 5% (Table shows stock tolerances in bold.) Termination: L = RoHS compliant silver-palladium-platinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: W = 7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). U = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead. 1.7 GHz L typ Q typ3 1.77 65 2.12 35 3.32 104 3.62 116 3.95 108 4.31 91 4.71 75 5.12 140 5.73 145 6.12 154 7.05 143 7.38 139 7.85 112 8.39 148 9.00 149 9.64 109 9.99 149 10.64 142 11.82 108 13.20 91 17.20 124 18.70 116 20.90 100 25.90 88 29.53 80 28.90 91 34.00 84 37.90 82 42.90 80 50.00 64 51.90 74 58.10 76 66.90 72 71.30 62 79.90 56 113.3 49 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — DCR max5 (Ohms) 0.033 0.180 0.024 0.031 0.039 0.080 0.100 0.036 0.036 0.036 0.042 0.052 0.080 0.054 0.054 0.037 0.053 0.048 0.042 0.088 0.078 0.085 0.066 0.140 0.150 0.074 0.150 0.130 0.170 0.225 0.19 0.17 0.24 0.28 0.30 0.33 0.42 0.52 0.46 0.58 0.54 0.58 0.72 0.82 1.50 2.00 2.00 2.00 3.00 2.25 2.80 3.60 4.00 4.00 Irms6 (mA) 2100 900 1900 1900 1600 1300 1100 1700 1700 1700 1400 1400 1300 1400 1400 1400 1400 1400 1400 1100 1200 1100 1200 850 850 1100 780 920 680 720 680 810 680 660 610 600 550 500 510 440 470 440 420 390 310 280 280 280 240 260 220 180 170 170 Color code Black Yellow Blue Red Brown Orange Violet Green Black White Red Green Brown Orange Yellow Black Blue Orange Gray Yellow Green White Blue Violet Orange Black Gray Brown White Red Black Orange Brown Blue Red Orange Yellow Violet Green White Blue Violet Gray White Black Green Gray Brown Violet Red Green Blue Gray Yellow 2. Inductance tested at listed frequency using an Agilent/HP 4286A impedance analyzer with a Coilcraft SMD-A fixture and Coilcraft-provided correlation pieces. 3. Q measured using an Agilent/HP 16197 test fixture in an Agilent/HP 4291 impedance analyzer. 4. SRF measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD-D test fixture. 5. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test fixture. 6. Current that causes a 15°C temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2009 SRF typ4 (GHz) 16.0 15.0 9.60 9.70 7.50 7.50 7.90 8.90 6.60 6.00 5.80 5.40 5.30 5.90 5.50 5.10 4.90 4.30 4.10 4.10 3.60 3.50 3.30 3.15 3.00 2.95 2.80 2.80 2.70 2.50 2.45 2.45 2.30 2.30 2.20 2.00 1.90 1.90 1.80 1.65 1.70 1.60 1.55 1.35 1.30 1.25 1.20 1.10 1.05 1.05 0.99 0.93 0.93 0.88 Document 537-2 Revised 05/18/09