EVERLIGHT 67-11-GHC-AT2V1-2T

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
TOP View LEDs
67-11/GHC-AT2V1/2T
Features
․P-LCC-2 package.
․White package.
․Optical indicator.
․Colorless clear window.
․Wide viewing angle.
․Suitable for vapor-phase reflow, Infrared reflow
and wave solder processes.
․Computable with automatic placement equipment.
․Available on tape and reel (8mm Tape).
․Pb-free.
․The product itself will remain within RoHS
compliant version
Descriptions
․The 67-11 series is available in soft orange, green,
blue and yellow. Due to the package design, the
LED has wide viewing angle and optimized light
coupling by inter reflector. This feature makes the
SMT TOP LED ideal for light pipe application.
The low current requirement makes this device
ideal for portable equipment or any other
application where power is at a premium.
Applications
․Automotive: backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․Light pipe application.
․General use.
Device Selection Guide
Chip
Material
InGaN
Emitted Color
Resin Color
Brilliant Green
Water Clear
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 1 of 10
Device No. :DSE-671-500
prepared date: 27.Mar.2007
Prepared by: Jonny
EVERLIGHT ELECTRONICS CO.,LTD.
67-11/GHC-AT2V1/2T
Package Dimensions
Notes: .All dimensions are in millimeters ,Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 2 of 10
Device No. :DSE-671-500
prepared date: 27.Mar.2007
Prepared by: Jonny
EVERLIGHT ELECTRONICS CO.,LTD.
67-11/GHC-AT2V1/2T
Absolute Maximum Ratings (Ta=25℃
℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
25
mA
Peak Forward Current (Duty 1/10 @1KHz)
IFP
100
mA
Power Dissipation
Pd
120
mW
Electrostatic Discharge(HBM)
ESD
2000
V
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~+90
℃
Soldering Temperature
Tsol
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Electro-Optical Characteristics (Ta=25℃
℃)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Condition
Luminous Intensity
Iv
225
-----
565
mcd
IF=20mA
Viewing Angle
2θ1/2
-----
120
-----
deg
IF=20mA
Peak Wavelength
λp
-----
518
-----
nm
IF=20mA
Dominant Wavelength
λd
517.5
-----
535.5
nm
IF=20mA
Spectrum Radiation Bandwidth
△λ
-----
35
-----
nm
IF=20mA
Forward Voltage
VF
2.75
-----
3.95
V
IF=20mA
Reverse Current
IR
-----
-----
10
µA
VR=5V
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Forward Voltage ±0.1V
3.Tolerance of Peak Wavelength ±1nm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 3 of 10
Device No. :DSE-671-500
prepared date: 27.Mar.2007
Prepared by: Jonny
EVERLIGHT ELECTRONICS CO.,LTD.
67-11/GHC-AT2V1/2T
Bin Rang Of Luminous Intensity
Bin
Min.
Max.
S2
225
285
T1
285
360
T2
360
450
U2
450
565
Unit
Condition
mcd
IF=20mA
Unit
Condition
nm
IF=20mA
Bin Rang Of Dominant Wavelength
Bin
Min
Max
B10
517.5
519.5
B11
519.5
521.5
B12
521.5
523.5
B13
523.5
525.5
B14
525.5
527.5
B15
527.5
529.5
B16
529.5
531.5
B17
531.5
533.5
B18
533.5
535.5
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Forward Voltage ±0.1V
3.Tolerance of Dominant Wavelength ±1nm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 4 of 10
Device No. :DSE-671-500
prepared date: 27.Mar.2007
Prepared by: Jonny
EVERLIGHT ELECTRONICS CO.,LTD.
67-11/GHC-AT2V1/2T
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 5 of 10
Device No. :DSE-671-500
prepared date: 27.Mar.2007
Prepared by: Jonny
EVERLIGHT ELECTRONICS CO.,LTD.
67-11/GHC-AT2V1/2T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 6 of 10
Device No. :DSE-671-500
prepared date: 27.Mar.2007
Prepared by: Jonny
EVERLIGHT ELECTRONICS CO.,LTD.
67-11/GHC-AT2V1/2T
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel.
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 7 of 10
Device No. :DSE-671-500
prepared date: 27.Mar.2007
Prepared by: Jonny
EVERLIGHT ELECTRONICS CO.,LTD.
67-11/GHC-AT2V1/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
No.
Items
Test Condition
Test
Hours/Cycles
Sample
Size
Ac/Re
1
Reflow Soldering
Temp. : 260℃±5℃ Min.
5sec.
6 Min.
22 PCS.
0/1
2
Temperature Cycle
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
300 Cycles
22 PCS.
0/1
3
Thermal Shock
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles
22 PCS.
0/1
4
High Temperature Storage
Temp. : 100℃
1000 Hrs.
22 PCS.
0/1
5
Low Temperature Storage
Temp. : -40℃
1000 Hrs.
22 PCS.
0/1
6
DC Operating Life
IF = 20 mA
1000 Hrs.
22 PCS.
0/1
7
High Temperature / High
Humidity
85℃/ 85%RH
1000 Hrs.
22 PCS.
0/1
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 8 of 10
Device No. :DSE-671-500
prepared date: 27.Mar.2007
Prepared by: Jonny
EVERLIGHT ELECTRONICS CO.,LTD.
67-11/GHC-AT2V1/2T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
1~5 °C / Sec.
260°C. Max.
10 Sec. Max.
1~5 °C / Sec.
Pre-heating
180~200°C
60 Sec. Max.
Above 220°C
120 Sec. Max.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 9 of 10
Device No. :DSE-671-500
prepared date: 27.Mar.2007
Prepared by: Jonny
EVERLIGHT ELECTRONICS CO.,LTD.
67-11/GHC-AT2V1/2T
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Fax: 886-2267-6244, 2267-6189, 2267-6306
Everlight
Electronics
Rev. 1
Page: 10 of 10
Tucheng,
TaipeiCo.,
236,Ltd.
Taiwan, R.O.Chttp://www.everlight.com
http://www.everlight.com
Device No. :DSE-671-500
prepared date: 27.Mar.2007
Prepared by: Jonny
EVERLIGHT ELECTRONICS CO.,LTD.
67-11/GHC-AT2V1/2T
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 11 of 10
Device No. :DSE-671-500
prepared date: 27.Mar.2007
Prepared by: Jonny