EVERLIGHT 65-21-GVC-AK2M1Z-3AA

EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
Mini Top LEDs (Reverse Gull Wing) (Preliminary)
65-21/GVC-AK2M1Z/3AA
Features
․White SMT package.
․Optical indicator.
․Wide viewing angle.
․Soldering methods: IR reflow soldering.
․Available on tape and reel.
․Pb-free
․The product itself will remain within RoHS
compliant version.
Descriptions
․The 65-21 series is available in soft orange, green,
blue, and yellow. Due to the package design, the
LED has wide viewing angle and optimized light
coupling by inter reflector. Besides, LED is
mounted top down and emits through the PCB.
This feature makes the SMT TOP LED ideal for
light pipe application.
Applications
․Optical indicators.
․Coupling into light guides.
․Backlighting (LCD, cellular phones, switches, keys,
displays, illuminated advertising, general lighting).
․Coupling into light guides; Interior automotive
lighting (e.g. dashboard backlighting, etc.).
Device Selection Guide
Chip
Emitted Color
Resin Color
Green
Water Clear
Material
AlGaInP
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 3
Page: 1 of 10
Device No.:
Prepared date: 30-Apr-2007
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO., LTD.
65-21/GVC-AK2M1Z/3AA
Package Outline Dimensions
Notes: All dimensions are in millimeters.
Tolerances unspecified are ±0.1mm.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 3
Page: 2 of 10
Device No.:
Prepared date: 30-Apr-2007
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO., LTD.
65-21/GVC-AK2M1Z/3AA
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
25
mA
Peak Forward Current (Duty
1/10 @1KHz)
IFP
60
mA
Power Dissipation
Pd
60
mW
Electrostatic Discharge(HBM)
ESD
2000
V
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +90
℃
Soldering Temperature
Tsol
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Condition
Luminous Intensity
Iv
9.0
-----
22.5
mcd
IF=10mA
Viewing Angle
2θ1/2
-----
120
-----
deg
IF=10mA
Peak Wavelength
λp
-----
568
-----
nm
IF=10mA
Dominant Wavelength
λd
563.5
-----
571.5
nm
IF=10mA
Spectrum Radiation
Bandwidth
Δλ
-----
20
-----
nm
IF=10mA
Forward Voltage
VF
-----
2.0
2.4
V
IF=10mA
Reverse Current
IR
-----
-----
10
μA
VR=5V
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Dominant Wavelength ±1nm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 3
Page: 3 of 10
Device No.:
Prepared date: 30-Apr-2007
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO., LTD.
65-21/GVC-AK2M1Z/3AA
Bin Range of Dominant Wavelength
Group
A
Bin Code
Min
Max
C13
563.5
565.5
C14
565.5
567.5
C15
567.5
569.5
C16
569.5
571.5
Unit
Condition
mcd
IF=10mA
Bin Range of Luminous Intensity
Bin Code
Min
Max
K2
9.0
11.5
L1
11.5
14.5
L2
14.5
18.0
M1
18.0
22.5
Unit
Condition
mcd
IF=10mA
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Dominant Wavelength ±1nm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 3
Page: 4 of 10
Device No.:
Prepared date: 30-Apr-2007
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO., LTD.
65-21/GVC-AK2M1Z/3AA
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 3
Page: 5 of 10
Device No.:
Prepared date: 30-Apr-2007
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO., LTD.
65-21/GVC-AK2M1Z/3AA
Packing specification
˙Label explanation
(1) CPN:Customer’s Production Number
(2) P/N:Production Number
(3) QTY:Packing Quantity
(4) CAT:Luminous Intensity Rank
(5) HUE:Dom. Wavelength Rank
(6) REF:Forward Voltage Rank
(7) LOT No:Lot Number
RoHS
˙Reel Dimensions
2.2 0.5
178.0 1.0
60.0 1.0
9.0 1.0
12.0 1.0
13.0 0.5
Note:Tolerances unless dimension ±0.1mm. Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 3
Page: 6 of 10
Device No.:
Prepared date: 30-Apr-2007
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO., LTD.
65-21/GVC-AK2M1Z/3AA
Carrier Tape Dimensions; Loaded quantity per reel 3000 PCS/reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 3
Page: 7 of 10
Device No.:
Prepared date: 30-Apr-2007
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO., LTD.
65-21/GVC-AK2M1Z/3AA
Reliability Test Items and Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
No.
Items
1
Reflow Soldering
Test Condition
Test
Hours/Cycles
Sample
Size
Ac/Re
Temp. : 260℃±5℃
6 min
22 PCS.
0/1
300 Cycles
22 PCS.
0/1
Min. 5sec.
H : +100℃ 15min
2
Temperature Cycle
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
3
Thermal Shock
∫ 10 sec
L : -10℃ 5min
300 Cycles
22 PCS.
0/1
4
High Temperature Storage
Temp. : 100℃
1000 Hrs.
22 PCS.
0/1
5
Low Temperature Storage
Temp. : -40℃
1000 Hrs.
22 PCS.
0/1
6
DC Operating Life
IF = 20 mA
1000 Hrs.
22 PCS.
0/1
7
High Temperature / High
Humidity
85℃/ 85%RH
1000 Hrs.
22 PCS.
0/1
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 3
Page: 8 of 10
Device No.:
Prepared date: 30-Apr-2007
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO., LTD.
65-21/GVC-AK2M1Z/3AA
Precautions for Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or
less. If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment: 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
1~5 °C / Sec.
260°C. Max.
10 Sec. Max.
1~5 °C / Sec.
Pre-heating
180~200°C
60 Sec. Max.
Above 220°C
120 Sec. Max.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals,
and do soldering of each terminal. Be careful because the damage of the product is often started
at the time of the hand solder.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 3
Page: 9 of 10
Device No.:
Prepared date: 30-Apr-2007
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO., LTD.
65-21/GVC-AK2M1Z/3AA
5. Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 3
Page: 10 of 10
Device No.:
Prepared date: 30-Apr-2007
Prepared by: Ray Yuan