® Model 6701 BNC Male to Dual BNC Female Right-Angle Adapter Features: The modified “ T ” adapter maximizes space by allowing a right-angle connection of BNC cables into the body instead of the side as with conventional “ T “ adapters. Ideal for cross-connect panels requiring multiple BNC connections. Adapter is precision machined (not die-cast) from brass. Materials: Connector Body Center Contact Pin Center Contact Socket Insulator Rubber Gasket Nickel plated brass Gold plated brass Gold plated phosphor bronze Polybutylene Terephthalate Silicone rubber Ratings: Impedance: Frequency: VSWR: Contact Resistance: Voltage Insulation Resistance: Insertions: Temperature: 50 Ohms 0 to 4 GHz 1.30 max 3 Milliohms max. * 500 V 5,000 Megohms min. 500 -40 to +85 C * Hands free testing in controlled voltage environment: For CE compliance: not intended for hand held use at voltages above 33 Vrms / 70 Vdc. All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 001 D1099629 Page 1 of