ETC 0604HQ

Document 285-1
Chip
ChipInductors
Inductors--0604SMS
0604HQ Series (1610)
The 0604HQ Series offers the highest Q factors and
current handling capabilities of any inductor this small.
tance values not available in Coilcraft’s 0603, 0402 or
0906 product families. Custom values may be available.
These parts combine the exceptionally high Q of an air
core inductor with the rugged construction of a ceramic
body component. They also provide intermediate induc-
Coilcraft Designer’s Kit C151 contains samples of all
values shown. To order, contact Coilcraft or purchase
it on-line at http://order.coilcraft.com.
2
2
Part number1
0604HQ-1N1_X_
0604HQ-2N6_X_
0604HQ-4N5_X_
0604HQ-5N0_X_
0604HQ-6N8_X_
0604HQ-7N6_X_
0604HQ-10N_X_
Inductance2
Percent
Q
900 MHz
2
(nH)
tolerance3 2min4 L typ Q typ
1.15 @ 500 MHz 10,5
25
1.2 40
2.6 @ 500 MHz
10,5
45
2.6 78
4.5 @ 500 MHz
10,5
50
4.5 103
5.0 @ 500 MHz
10,5
60
4.9 106
6.8 @ 500 MHz
10,5
60
6.9 101
7.6 @ 500 MHz
10.4 @ 500 MHz
10,5
10,5
60
60
1. When ordering, please specify tolerance and packaging codes:
Inductance tolerance code:
Table above shows stock tolerances in bold.
J= ±5%, K= ±10%
0604HQ-10N_X_
Packaging code:
C= 7앨 machine-ready reel EIA RS-481 clear plastic
tape. (2000 per full reel)
B= Less than full reel On tape, not machine ready.
To have a leader and a trailer added ($25 charge),
use code letter C instead.
7.4 109
10.6 103
1.7 GHz
L typ Q typ
1.2 136
2.6 163
4.7 155
5.2 178
7.4 172
7.9
11.5
137
160
SRF
min5
(MHz)
6000
6000
5800
5300
4700
2
4400
4100
DCR
IDC
max6 2max7 Color
(Ohms) (A)
code
0.021 3.0
Black
0.026 2.0 Brown
0.032 1.8
Red
0.032 1.6 Orange
0.035 1.8 Yellow
2
0.035
0.037
1.5
1.5
Green
Blue
2. Inductance measured using Coilcraft SMD-A fixture in Agilent/HP4286
impedance analyzer.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured at 500MHz using Agilent/HP4291A with Agilent/HP16193
test fixture and on Agilent/HP8753D with Coilcraft SMD-D test fixture.
5. SRF measured using Agilent/HP8753D network analyzer and Coilcraft
SMD-D test fixture.
6. DCR measured on Cambridge Technology micro-ohmmeter and
Coilcraft CCF858 test fixture.
7. For 15° C rise.
8. Operating temperature range −40°C to +125°C.
9. Electrical specifications at 25°C.
For environmental data see Product Specifications section.
Specifications subject to change without notice.
Document 285-1 Revised 9/3/02
Document 285-2
0604HQ Series (1610)
TYPICAL Q vs FREQUENCY
TYPICAL L vs FREQUENCY
A max B max C max
D ref
0.073 0.054
0.047
0.025 0.040 0.013 0.034 0.053 0.025 0.025
1,85
1,19
0,64
1,37
E
1,02
F
0,33
G
0,86
H
I
1,35
0,63
J
0,63
Parts/reel: 7″ 2000 Tape width: 8 mm
For packaging data see Tape and Reel Specifications section.
Specifications subject to change without notice.
Document 285-2 Revised 5/2/02