MIL-PRF 24758A 759-861 Connector to Connector Factory Terminated Conduit Assembly A Adapter “A” Connector Designator Adapter “B” Connector Designator Basic Number A,C,D,F,G,H & W (Tables I & II) A,C,D,F,G,H & W (Tables I & II) 759-861 A H 16 Adapter “B” Shell Size (Table II) 1.500 (38.1) Max (Table II) 15 - 20 - 50.5 Adapter “A” Shell Size A Thread Conduit Dash Number (Table II) Length In Inches (See Note 3) Length See P/n Development (See Note 3) B I.D END B END A Wrench Flats (Hex) M24758-(Prf Size) With Glenair "Blue Jacket" A Thread Medium Raised Diamond Knurl APPLICATION NOTES 1. Assembly identified with manufacurer’s code identification. 2. Glenair 600 series backshell assembly tools are recommended for assembly installation. 3. Length tolerance is 0-24” = +1/4”, for longer lengths is +1% of length. © 2010 Glenair, Inc. 4. Material / Finish: Adapter, ferrule & coupling nut - AISI 316L stainless steel / electroless nickel, matte finish. 5. Metric dimensions (mm) are indicated in parentheses. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] A-80 www.glenair.com MIL-PRF 24758A 759-861 Connector to Connector Factory Terminated Conduit Assembly A TABLE I: CONNECTOR CODE CONN. CODE SPECIFICATION A MIL-DTL-5015 (MS34**) MIL-DTL-26482 Series II MIL-DTL-83723 Series I, III C MIL-C-22992 Series R D MIL-C-26482 Series I F MIL-DTL-38999, Series I G MIL-C-28840 H MIL-DTL-38999 Series III, IV W Glenair Series 22 (Geo-Marine®) TABLE II: CONDUIT DASH NO. © 2010 Glenair, Inc. CONDUIT DASH NO MIL PRF SIZE B MIN. 08 A .245 (6.22) 12 J .370 (9.40) 16 B .495 (12.57) 20 K .620 (15.75) 24 C .745 (18.92) 32 D .995 (25.27) 40 E 1.245 (31.62) 48 F 1.495 (37.97) 64 G 1.995 (50.67) 80 H 2.495 (63.37) 96 L 2.995 (76.07) CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] A-81 www.glenair.com