REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B C D MECHANICAL DIMENSIONS: 2.65 1.15 1.063 ± 0.003 R0.04MAX 0.138(2X) 1.34MAX 0.28 1.555MAX 2.6 ± 0.003 PANEL CUTOUT t=0.079 APPROVED DP DP LY 0.079(2X) 0.079 0.157(2X) 1-1. VOLTAGE RATING.....................................................115/250VAC 1-2. CURRENT RATING A. @ 115/250VAC (UL, CSA) ...............6 A RMS MAX B. @ 250VAC (SEMKO) .........................6 A RMS MAX 1-3. SPST POWER SWITCH: A. @ 250 VAC (VDE)..................................6 A RMS MAX 1-4. OPERATING FREQUENCY .........................................48-440Hz 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND ............................2000 VDC B. LINE TO LINE ......................................2000 VDC 1-6. MINIMUM INSULATION RESISTANCE: @ 500VDC ONE MINUTE A. LINE & NEUTRAL TO GROUND .....10M OHM B. LINE & NEUTRAL ................................10M OHM 1-7. SAFETY: 1-8. SINGLE 5x20mm FUSEHOLDER 1-9. SNAP-IN PANEL THICKNESS: .04IN~.07IN (1.0mm~1.8mm) 1-10. RoHS COMPLIANT 1.059MAX ELECTRICAL SCHEMATIC: DATE 06-01-06 01-24-08 10-26-09 RoHS Compliancy Updated Specifications Graphics and Approval Update ELECTRICAL CHARACTERISTICS: FUSE HOLDER t=0.023 0.165 DESCRIPTION Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. PPC DIVISION 761-18/003 Part Number: Description: MULTI-FUNCTION MODULE UNIT: in REV. D 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 S.Tsai 05-04-01 05-04-01 JJH / 05-04-01