Series 800 Series 800 “Mighty Mouse” with UN Mating Thread Printed Circuit Board Receptacle Ordering Info 800-012-02 and 800-012-07 Series 800 Receptacles feature goldplated straight PCB tails or solder cup contacts. Contacts are non-removable. A Two Shell Styles: jam nut with o-ring for rear panel mounting, or square flange. B C Integral Standoffs allow clearance for washing. Series 800 PCB Receptacle D HOW TO ORDER Sample Part Number 800-012 -07 M 7-10 P Z Series Shell Style Shell Material / Finish Shell Size- Insert Arrangement Contact Type Shell Key Position E F Epoxy Sealed to prevent water ingress in “open face” condition. 800-012 C PCB Receptacle, Vertical Mount Aluminum / Black Anodize (Non-Conductive) RoHS Compliant M G -02 Square Flange Aluminum / Electroless Nickel RoHS Compliant NF Aluminum / Cadmium with Olive Drab Chromate H ZN -07 Jam Nut J Aluminum / Zinc-Nickel with Olive Drab Chromate UCR Aluminum / Zinc-Cobalt with Black Chromate RoHS Compliant K ZNU Aluminum / Zinc-Nickel with Black Chromate MT L Aluminum / Nickel-PTFE RoHS Compliant Z1 Stainless Steel / Passivated RoHS Compliant M © 2009 Glenair, Inc. Arr. 5-3 6-1 6-4 6-7 7-1 7-10 8-2 8-13 8-200 9-4 9-19 9-200 9-201 10-5 10-26 10-200 10-201 10-202 12-2 12-3 12-7 12-37 12-200 12-201 No. of Contacts P N #23 #20 #16 #12 3 1 4 7 1 10 2 13 4 2 4 19 4 2 8 2 5 26 12 1 4 2 8 2 2 3 7 37 6 2 10 2 Pin Normal Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 S X Socket Pos. X E Y Pin, Solder Cup Pos. Y F Pos. Z Z Socket, Solder Cup Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-10 Rev. 01-FEB-2009 E-Mail: [email protected] Series 800 Series 800 “Mighty Mouse” with UN Mating Thread Printed Circuit Board Receptacle Dimensions Jam Nut Receptacle 800-012-07 A F MAX G .460 (11.7) ØA C FLAT .125 (3.18) MIN B øE C SOLDER CUP CONTACT REF. 4X .025 (.64) STANDOFF D THREAD .125 (3.2) MAX PANEL THICKNESS SHELL SIZE 5 & 6 B FLATS D .051 (1.3) SHELL SIZE 5 & 6 .093 (2.4) SHELL SIZE 7 THRU 12 .100 (2.5) MAX PANEL THICKNESS SHELL SIZE 7 & UP E DIMENSIONS Shell Size 5 6 7 8 9 10 12 In. ØA mm. .541 .610 .670 .775 .875 .980 1.062 13.74 15.49 17.02 19.69 22.23 24.89 26.97 In. ØB mm. .500 .562 .635 .735 .806 .940 .986 12.70 14.27 16.13 18.67 20.47 23.88 25.04 C In. mm. D Threads Mating ØE Tail Dia. .285 .352 .411 .473 .530 .604 .712 7.24 8.94 10.44 12.01 13.46 15.34 18.08 .3125-28 UN-2A .3750-28 UN-2A .4375-28 UNEF-2A .5000-32 UN-2A .5625-32 UN-2A .6250-32 UN-2A .7500-28 UN-2A #23 .018/.022 (0.46/0.56) #20 .024/.028 (0.61/0.71) #16 .060/.064 (1.52/1.63) #12 .092/.096 (2.34/2.44) SERIES 800 KEY POSITIONS F Max In. mm. In. .725 .725 .700 .700 .700 .700 .700 .247 .247 .205 .205 .205 .205 .205 18.42 18.42 17.78 17.78 17.78 17.78 17.78 G mm. 6.27 6.27 5.21 5.21 5.21 5.21 5.21 Y° X° J 60° Z° Y° X° NORMAL K Plug Receptacle Key Position Key Rotation Normal (N) X Y Z 150° 140° 130° 120° Shell size 5 and 6: master key is located at top dead center for normal (N) position. Shell size 7 thru 12: master key is rotated 90° from TDC for normal position. © 2009 Glenair, Inc. Shell Size 5 6 7 8 9 10 12 A Flat In. .302 / .298 .365 / .361 .424 / .420 .486/ .482 .543/ .539 .617/.613 .725/.721 Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 øB mm. 7.67/ 7.57 9.27/9.17 10.77/ 10.67 12.34/ 12.24 13.79/ 13.69 15.67/ 15.57 18.42/ 18.31 In. .318 .386 .449 .510 .574 .635 .760 mm. 8.08 9.80 11.40 12.95 14.58 16.12 19.30 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com H A FLAT Z° NORMAL G SERIES 800 PANEL CUTOUTS øB 60° F C-11 Rev. 01-FEB-2009 E-Mail: [email protected] L M Series 800 Series 800 “Mighty Mouse” with UN Mating Thread Printed Circuit Board Receptacle Dimensions Square Flange Receptacle 800-012-02 A G MAX B 4X Ø D THRU HOLE ØC H .125 (3.18) MIN C A SQ B BSC øF SOLDER CUP CONTACT REF. 4X .025 (.64) STANDOFF E THREAD D .039 (.10) SHELL SIZE 5 & 6 .050 (1.27) SHELL SIZE 7 THRU 12 .320 (8.1) SHELL SIZE 5 & 6 .460 (11.7) SHELL SIZE 7 THRU 12 E DIMENSIONS F G H Shell Size 5 6 7 8 9 10 12 A SQ In. mm. .527 .588 .650 .710 .938 .938 1.031 13.39 14.92 16.51 18.03 23.83 23.83 26.19 B ØD ØC In. mm. In. mm. ± .005 ± 0.13 In. mm. .363 .423 .483 .542 .719 .719 .812 9.22 .680 10.74 .750 12.27 .830 13.77 .938 18.26 1.250 18.26 1.250 20.62 1.375 17.27 19.05 21.08 23.83 31.75 31.75 34.93 .094 .094 .128 .128 .128 .128 .128 E Threads Mating 2.39 2.39 3.25 3.25 3.25 3.25 3.25 ØF Tail Dia. .3125-28 UN-2A .3750-28 UN-2A .4375-28 UNEF-2A .5000-32 UN-2A .5625-32 UN-2A .6250-32 UN-2A .7500-28 UN-2A #23 .018/.022 (0.46/0.56) #20 .024/.028 (0.61/0.71) #16 .060/.064 (1.52/1.63) #12 .092/.096 (2.34/2.44) G Max In. mm. In. mm. .725 .725 .700 .700 .700 .700 .700 .426 .426 .255 .255 .255 .255 .255 10.82 10.82 6.48 6.48 6.48 6.48 6.48 18.42 18.42 17.78 17.78 17.78 17.78 17.78 H SERIES 800 KEY POSITIONS J K Key Position Key Rotation Normal (N) 150° X 140° Y 130° 60° 60° Z° Y° X° NORMAL Z° L M Z 120° NORMAL Y° X° Shell size 5 and 6: master key is located at top dead center for normal (N) position. Shell size 7 thru 12: master key is rotated 90° from TDC. © 2009 Glenair, Inc. Plug Key Position Receptacle Key Position Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-12 Rev. 01-FEB-2009 E-Mail: [email protected]