CB Series Connectors CB Series “PogoPin” Connectors Receptacle Connectors for Panel Mounting - 7 Contacts Receptacles feature non-removable solder cup contacts or printed circuit board terminals. Contacts are plated with hard gold. Stainless steel connector body and jam nut. Shell is plated with black chromate finish. Silicone face seal prevents water ingress when unmated. Open face pressure rating 0.4 bar. 5000 cycles mating durability. Style 2 Style 1 Contact Types Solder cup contacts accept up to #20 AWG stranded wire (1mm max. diameter). PC tail contacts are available in two lengths: 3.5 mm and 8.0 mm SHORT PC TAIL Ø 0.53 x 3.5 8 7 Pin Receptacle Connector Mating Face and Key Positions G F B C E B Position A B 1 2 3 4 120° 130° 135° 165° White Yellow Green Pink © 2007 Glenair, Inc. D Jam nut receptacle for rear panel mounting (3.5 mm maximum panel thickness). Supplied with stainless steel jam nut and flat washer. Nitrile O-ring provides watertight panel seal. 13 grams maximum weight. 3 Two hole flange mount receptacle for front panel mounting. Mounting holes accept M3 screws, not supplied. Use with optional gasket or O-ring for watertight panel sealing. 16 grams maximum weight. Style 4 2 Jam nut receptacle with M14X1 accessory threads for rear panel mounting (3.5 mm max. panel thickness). Supplied with stainless steel jam nut and flat washer. Nitrile O-ring provides watertight panel seal. 13 grams maximum weight. 4 "Thread-in" receptacle with PG9 threads for installation directly into a tapped hole. Supplied with O-ring. 16 grams maximum weight. 7 Pin Panel Mount Receptacle Polarizing Position 1 (Blue) Solder Cup CB07C1L0 Short PC Tail CB07C1L1 Long PC Tail CB07C1L2 Solder Cup CB07T1L0 Short PC Tail CB07T1L1 Long PC Tail CB07T1L2 Solder Cup CB07B1L0 Short PC Tail CB07B1L1 Long PC Tail CB07B1L2 Solder Cup CB07Q1L0 Short PC Tail CB07Q1L1 Long PC Tail CB07Q1L2 Mounting Style Contact Fig. Type Jam Nut Jam Nut Jam Nut Fig. 1 Fig. 1 Fig. 1 Jam Nut w/ Thd. Fig. 2 Color Code 90° 105° 110° 100° E Jam Nut w/ Thd. Fig. 2 A C G Jam Nut w/ Thd. Fig. 2 D B F 1 SOLDER CUP #20 AWG A A Style 3 CB07B1L0 Jam Nut Receptacle Flange Fig. 3 Flange Fig. 3 Flange Fig. 3 Thread-In Fig. 4 Thread-In Fig. 4 Thread-In Fig. 4 Polarizing Position 2 (Yellow) CB07C2L0 CB07C2L1 CB07C2L2 CB07T2L0 CB07T2L1 CB07T2L2 CB07B2L0 CB07B2L1 CB07B2L2 CB07Q2L0 CB07Q2L1 CB07Q2L2 All dimensions in millimeters (mm). Information subject to change without notice. CAGE Code 06324 Polarizing Position 3 (Green) CB07C3L0 CB07C3L1 CB07C3L2 CB07T3L0 CB07T3L1 CB07T3L2 CB07B3L0 CB07B3L1 CB07B3L2 CB07Q3L0 CB07Q3L1 CB07Q3L2 Polarizing Position 4 (Pink) CB07C4L0 CB07C4L1 CB07C4L2 CB07T4L0 CB07T4L1 CB07T4L2 CB07B4L0 CB07B4L1 CB07B4L2 CB07Q4L0 CB07Q4L1 CB07Q4L2 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 10 E-Mail: [email protected] CB Series Connectors CB Series “PogoPin” Connectors Receptacle Connectors for Panel Mounting - 10 Contacts Receptacles feature non-removable solder cup contacts for up to #20 AWG wire or printed circuit board terminals. Contacts are plated with hard gold. Stainless steel connector body and jam nut. Shell is plated with black chromate finish. Silicone face seal and O-ring. Open face pressure rating 0.4 bar. 5000 cycles mating durability. Style 2 Style 1 Contact Types Solder cup contacts accept up to #20 AWG stranded wire (1mm max. diameter). PC tail contacts are available in two lengths: 3.5 mm and 8.0 mm 30° F K B H J E D 3 Two hole flange mount receptacle for front panel mounting. Mounting holes accept M3 screws, not supplied. Use with optional gasket or O-ring for watertight panel sealing. 19 grams maximum weight. A C E D Jam Nut Jam Nut Jam Nut Fig. 1 Solder Cup Fig. 1 Short PC Tail Fig. 1 Long PC Tail Jam Nut/ Thd. Fig. 2 Solder Cup Jam Nut / Thd. Fig. 2 Short PC Tail B Position A B Color Code N W X Y Z 140° 115° 105° 120° 145° White Blue Violet Chrome Yellow Dark Red 95° 85° 100° 110° 80° © 2007 Glenair, Inc. Style 4 2 Jam nut receptacle with M14X1 accessory threads for rear panel mounting (3.5 mm max. panel thickness). Supplied with stainless steel jam nut and flat washer. O-ring provides watertight panel seal. 19 grams maximum weight. 4 "Thread-in" receptacle with PG9 threads for installation directly into a tapped hole. Supplied with O-ring. 19 grams maximum weight. 10 Pin Panel Mount Receptacle Mounting Contact Style Fig. Type A G C G Jam nut receptacle for rear panel mounting (3.0 mm maximum panel thickness). Supplied with stainless steel jam nut and flat washer. O-ring provides watertight panel seal. 11 grams maximum weight. SHORT PC TAIL Ø 0.53 x 3.5 10 Pin Receptacle Connector Mating Face and Key Positions B F 1 SOLDER CUP #20 AWG 8 A Style 3 CB07B1L0 Jam Nut Receptacle Jam Nut / Thd. Fig. 2 Long PC Tail Flange Fig. 3 Solder Cup Flange Fig. 3 Short PC Tail Flange Fig. 3 Long PC Tail Thread-In Fig. 4 Solder Cup Thread-In Fig. 4 Short PC Tail Thread-In Fig. 4 Long PC Tail Polarizing Polarizing Position N Position W (White) (Blue) CB10C1L0 CB10C2L0 CB10C1L1 CB10C2L1 CB10C1L2 CB10C2L2 CB10T1L0 CB10T2L0 CB10T1L1 CB10T2L1 CB10T1L2 CB10T2L2 CB10B1L0 CB10B2L0 CB10B1L1 CB10B2L1 CB10B1L2 CB10B2L2 CB10Q1L0 CB10Q2L0 CB10Q1L1 CB10Q2L1 CB10Q1L2 CB10Q2L2 Polarizing Position X (Violet) CB10C3L0 CB10C3L1 CB10C3L2 CB10T3L0 CB10T3L1 CB10T3L2 CB10B3L0 CB10B3L1 CB10B3L2 CB10Q3L0 CB10Q3L1 CB10Q3L2 All dimensions in millimeters (mm). Information subject to change without notice. CAGE Code 06324 Polarizing Position Y (Chrome Yellow) CB10C4L0 CB10C4L1 CB10C4L2 CB10T4L0 CB10T4L1 CB10T4L2 CB10B4L0 CB10B4L1 CB10B4L2 CB10Q4L0 CB10Q4L1 CB10Q4L2 Polarizing Position Z (Dark Red) CB10C5L0 CB10C5L1 CB10C5L2 CB10T5L0 CB10T5L1 CB10T5L2 CB10B5L0 CB10B5L1 CB10B5L2 CB10Q5L0 CB10Q5L1 CB10Q5L2 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 11 E-Mail: [email protected] CB Series Connectors CB Series “PogoPin” Connectors Jam Nut Receptacle Dimensions LOCATION OF POLARIZING COLOR CODE A B G F 20.6 MAX 16.2 MAX 3.0 MAX 3.0 MAX JAM NUT JAM NUT 12.8 (+0 / -0.1) FLATS C E 22.7 MAX 16.2 MAX O-RING DETAIL A DETAIL A D Ø 17.0 MAX 2.0 M14 X 1 THD O-RING M14 x 0.75 WASHER M14 x 0.75 WASHER 3.0 MAX PANEL 3.0 MAX PANEL Flange Mount Receptacle Dimensions Ø 3.7/3.3 THRU HOLE 2 PLCS DETAIL A SOLDER CUP #20 AWG 1.0 MAX. C G D CB07B1L0 RAD 3.5 B F E Contact Termination Styles 1.5 ± 0.15 LOCATION OF POLARIZING COLOR CODE A Ø 18.0 Detail A Ø 12.8 MAX. Ø 13.5 MAX. 2.5 1.14 MAX. SHORT PC TAIL 13 MAX. 25.0 ± 0.1 32.0 MAX. 0.45/0.53 20.5 MAX. LONG PC TAIL 2.9/3.0 Thread-In Mount Receptacle Dimensions LOCATION OF POLARIZING COLOR CODE A 0.45/0.50 8 4.0 PG 9 THREAD I.A.W. DIN 40430 2.0 B F C G E 3.5 Ø 18.0 Ø 13.5 MAX. MAX. DETAIL A D 17.0 14.2 MAX. 21.9 MAX. © 2007 Glenair, Inc. All dimensions in millimeters (mm). Information subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 12 E-Mail: [email protected] CB Series Receptacle Connector Panel Cutouts 3.5 + 0.15/-0 32.0 MAX. MAXIMUM PANEL THICKNESS 3.0 25 ± 0.15 14.2 +0.1/-0 12.4 + 0.2/-0 Ø 3.1 Ø 18.0 MAX. 12.9 +0.1/-0 1 Panel cutout for jam nut receptacle for rear panel mounting. 2 Panel cutout for elliptical flange mount receptacle. For front panel mounting. Nitrile panel gasket for elliptical flange mount receptacle. Ordered separately. Description Part Number Gasket CBGK-B 3 12.4 + 0.2/-0 25.0 ± 0.15 25 ± 0.15 15.8 + 0.2/-0 M3 TAPPED THREAD 0-RING (SOLD SEPARATELY) 1.4 ± 0.1 4a Face view of panel cutout for elliptical flange receptacle with tapped holes. 4a Side view of panel cutout for elliptical flange receptacle with tapped holes. O-ring for use with cutout #4. Purchased separately. Description Part Number O-Ring CBOR-B 5 Receptacle Connector Printed Circuit Board Patterns CL CL 2.6 2.45 1.55 2.6 A 3 1.5 F G C 3 1.5 CL CL A G 3.8 0.45 B 2.45 1.55 K B H C F J 3.2 1.1 E E D 2.05 © 2007 Glenair, Inc. PCB mounting pattern for receptacles with 7 contacts. 2 1.65 D 2.05 3.65 1 2.9 3.65 PCB mounting pattern for receptacles with 10 contacts. All dimensions in millimeters (mm). Information subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 13 E-Mail: [email protected] Connectors CB Series “PogoPin” Connectors