EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Performance SMD LED with Reflector 93-21SUBC/S400-XX/TR8 Features ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Eia std. package. ․IC compatible. ․Pb- free. ․The product itself will remain within RoHS compliant version. Applications ․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Indicator and backlight for audio and video equipment ․Indicator and backlight for battery driven equipment. ․Flat backlight for LCD, switch and symbol. ․Light pipe application. ․General use. Device Selection Guide Chip Material Emitted Color InGaN Blue Lens Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 1 of 10 Device No. : DSE-931-070 Prepared date:23.Sep.2005 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 93-21SUBC/S400-XX/TR8 0.5± 0.07 2.2± 0.1 1.7± 0.1 1.0± 0.1 1.5± 0.1 0.4± 0.07 Package Dimensions + Anode mark 3.0± 0.1 4.6± 0.2 0.15± 0.05 0.62 +0.13 -0 2.7± 0.1 Polarity 0.26± 0.1 0.4± 0.1 4.34± 0.1 0.74± 0.1 0.5± 0.1 For reflow soldering (propose) 0.74± 0.1 Notes: All dimensions are in millimeters. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 2 of 10 Device No. : DSE-931-070 Prepared date:23.Sep.2005 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 93-21SUBC/S400-XX/TR8 Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +100 ℃ Electrostatic Discharge(HBM) ESD 150 V Power Dissipation Pd 110 mW Peak Forward Current (Duty 1/10 @ 1KHZ) IFP 100 mA Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 3 of 10 Device No. : DSE-931-070 Prepared date:23.Sep.2005 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 93-21SUBC/S400-XX/TR8 Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Symbol Iv *Chip Min. Typ. Max. A4 50 68 ----- A5 63 83 ----- A6 76 110 ----- X8 102 162 ----- X9 120 187 ----- Rank Unit Condition mcd IF=20mA Viewing Angle 2θ1/2 ----- ----- 130 ----- deg IF=20mA Peak Wavelength λp ----- ----- 468 ----- nm IF=20mA Dominant Wavelength λd ----- ----- 470 ----- nm IF=20mA △λ ----- ----- 35 ----- nm IF=20mA Forward Voltage VF ----- ----- 3.5 4.3 V IF=20mA Reverse Current IR ----- ----- ----- 50 μA VR=5V Spectrum Radiation Bandwidth *93-21SUBC/S400-XX/TR8 Chip Rank Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 4 of 10 Device No. : DSE-931-070 Prepared date:23.Sep.2005 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 93-21SUBC/S400-XX/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 5 of 10 Device No. : DSE-931-070 Prepared date:23.Sep.2005 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 93-21SUBC/S400-XX/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 6 of 10 Device No. : DSE-931-070 Prepared date:23.Sep.2005 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 93-21SUBC/S400-XX/TR8 Carrier Tape Dimensions: Loaded quantity 1000 PCS per reel. Note: The tolerances unless mentioned is ±0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 7 of 10 Device No. : DSE-931-070 Prepared date:23.Sep.2005 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 93-21SUBC/S400-XX/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level:90% LTPD:10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 8 of 10 Device No. : DSE-931-070 Prepared date:23.Sep.2005 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 93-21SUBC/S400-XX/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 9 of 10 Device No. : DSE-931-070 Prepared date:23.Sep.2005 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 93-21SUBC/S400-XX/TR8 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 10 of 10 Device No. : DSE-931-070 Prepared date:23.Sep.2005 Prepared by: Teresa Lee