EVERLIGHT 93-22SURSYGC/S530

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
High performance SMD LED with Reflector
93-22SURSYGC/S530-A2/TR8
Features
z
Package in 12mm tape on 7” diameter reels.
z
Compatible with automatic placement equipment.
z
Compatible with infrared and vapor phase reflow solder
process.
z
EIA std. package.
z
IC compatible.
z
Pb-free.
z
The product itself will remain within RoHS compliant
version.
Applications
z
Automotive: backlighting in dashboard and switch.
z
Telecommunication: indicator and backlighting in
telephone and fax.
z
Indicator and backlight for audio and video equipment.
z
Indicator and backlight for battery driven equipment.
z
Small indicator for outdoor applications.
z
Indicator and backlight in office equipment.
z
Flat backlight for LED, switches and symbol.
z
General use.
Device Selection Guide
Chip
Lens Color
Type
Material
Emitted Color
SUR
AlGaInP
Brilliant Red
SYG
AlGaInP
Brilliant Yellow Green
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-932-027
prepared date: 21-Sep-2005
Water Clear
Rev. 2
Page: 1 of 11
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-22SURSYGC/S530-A2/TR8
Package Dimensions
SUR
SYG
Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-932-027
prepared date: 21-Sep-2005
Rev. 2
Page: 2 of 11
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-22SURSYGC/S530-A2/TR8
Absolute Maximum Ratings @Ta=25℃
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
25
mA
Forward Current
SUR
IF
SYG
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40~ +100
℃
ESD
2000
V
60
mW
60
mA
Electrostatic
Discharge(HBM)
Power Dissipation
Peak Forward Current (Duty
1/10 @ 1KHz)
Soldering Temperature
SUR
Pd
SYG
SUR
IFP
SYG
Tsol
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-932-027
prepared date: 21-Sep-2005
Rev. 2
Page: 3 of 11
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-22SURSYGC/S530-A2/TR8
Electro-Optical Characteristics @ Ta=25℃
Parameter
Luminous Intensity
Symbol
IV
λp
Dominant Wavelength
λd
Spectrum Radiation
Bandwidth
△λ
Forward Voltage
VF
Reverse Current
Typ.
Max.
SUR
17
41
-----
SYG
11
17
-----
-----
130
-----
SUR
-----
632
-----
SYG
-----
575
-----
SUR
-----
624
-----
SYG
-----
573
-----
SUR
-----
20
-----
SYG
-----
20
-----
SUR
-----
2.0
2.4
SYG
-----
2.0
2.4
-----
-----
10
2θ1/2
Viewing Angle
Peak Wavelength
Min.
IR
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-932-027
prepared date: 21-Sep-2005
Rev. 2
Unit
Condition
mcd
IF=20mA
deg
IF=20mA
nm
IF=20mA
nm
IF=20mA
nm
IF=20mA
V
IF=20mA
μA
VR=5V
Page: 4 of 11
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-22SURSYGC/S530-A2/TR8
Typical Electro-Optical Characteristics Curves(SUR)
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-932-027
prepared date: 21-Sep-2005
Rev. 2
Page: 5 of 11
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-22SURSYGC/S530-A2/TR8
Typical Electro-Optical Characteristics Curves(SYG)
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-932-027
prepared date: 21-Sep-2005
Rev. 2
Page: 6 of 11
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-22SURSYGC/S530-A2/TR8
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm,Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-932-027
prepared date: 21-Sep-2005
Rev. 2
Page: 7 of 11
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-22SURSYGC/S530-A2/TR8
Carrier Tape Dimensions: Loaded quantity per reel 1000 PCS/reel
Note: Tolerances Unless Dimension ±0.1mm
Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-932-027
prepared date: 21-Sep-2005
Desiccant
Rev. 2
Label
Page: 8 of 11
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-22SURSYGC/S530-A2/TR8
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
No.
Items
Test Condition
1
Reflow Soldering
Temp. : 260℃±5℃
Min. 5 sec.
Test
Sample
Ac/Re
Hours/Cycles Size
22 PCS.
0/1
Temperature Cycle
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
300 Cycles 22 PCS.
0/1
3
Thermal Shock
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles 22 PCS.
0/1
4
High Temperature
Storage
Temp. : 100℃
1000 Hrs.
22 PCS.
0/1
5
Low Temperature
Storage
Temp. : -40℃
1000 Hrs.
22 PCS.
0/1
6
DC Operating Life
IF = 20 mA / 25℃
1000 Hrs.
22 PCS.
0/1
7
High Temperature /
High Humidity
85℃/85%RH
1000 Hrs.
22 PCS.
0/1
2
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-932-027
prepared date: 21-Sep-2005
6 Min.
Rev. 2
Page: 9 of 11
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-22SURSYGC/S530-A2/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-932-027
prepared date: 21-Sep-2005
Rev. 2
Page: 10 of 11
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-22SURSYGC/S530-A2/TR8
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-932-027
prepared date: 21-Sep-2005
Rev. 2
Page: 11 of 11
Prepared by: Ray Yuan