Sav-Con® Connector Savers PATT 105 - PATT 602 Sav-Con® Connector Savers 94 0 L 009 N 24 G 61 P AA-B 131 Modification Codes* (Omit for None) Alternate Position A,B,C,D,E,F (N = Normal) Alternate Key Configuration AA, BB, CC, DD P = Pins, Plug Side S = Sockets, Plug Side Insert Arrangement G = EMI Ground Spring (Optional) – = Standard Shell Size Series No. Class 0 = General Duty 1 = Environmental 2 = Hi Rel L = Lock Ring (Optional) - = Standard Basic Part No. Finish Symbol (See Page G-6) *Add Modification Code 131 for Dry Lubricant on inside surfaces of Coupling Nut. May not be suitable for space applications. Length EMI Ground Spring (Optional) Interfacial Seal Class 1 and 2 RECEPTACLE END A B PLUG END Lock Ring (Optional) TABLE I Shell Size A Max B Max 08 10 12 14 16 18 20 22 24 .474 (12.0) .591 (15.0) .751 (19.1) .875 (22.2) 1.001 (25.4) 1.126 (28.6) 1.251 (31.8) 1.376 (35.0) 1.501 (38.1) .750 (19.1) .859 (21.8) 1.031 (26.2) 1.156 (29.4) 1.281 (32.5) 1.391 (35.3) 1.531 (38.9) 1.656 (42.1) 1.777 (45.1) Length Max 1.040 (26.4) 1.040 (26.4) 1.040 (26.4) 1.040 (26.4) 1.040 (26.4) 1.040 (26.4) 1.260 (32.0) 1.260 (32.0) 1.260 (32.0) Metric Dimensions (mm) are indicated in parentheses. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] G-26 Sav-Con® Connector Savers PATT 105 - PATT 602 Sav-Con® Connector Savers Insert Arrangements Shell Size Desig Insert Arrangement Dash No. Contact Size: Quantity 16 12 20 08 –33 –02 3 2 10 –06 –07 –03 –10 6 7 3 12 14 16 18 20 22 24 C L 10 –02 –05 –12 –19 2 5 4 A-A 8 19 –22 –08 –26 –08 –11 –32 –16 –41 –21 –55 –61 1 8 4 26 4 11 4 32 16 41 21 B-B C-C D-D 55 61 FACE VIEW RECEPTACLE Alternate Insert Positions (Degrees) D-D Shell Size N B A-A C E F N B B-B C E F N B C-C C E F N B C E F 08 10 12 14 16 18 20 22 24 105 105 105 105 105 105 105 105 105 – 85 89 91 93 95 95 97 97 – 125 121 119 117 115 115 113 113 118 115 115 75 75 75 75 75 75 82 85 85 120 120 120 120 120 120 140 140 140 140 140 140 140 140 140 – 120 124 126 128 130 130 132 132 – 160 156 154 152 150 150 148 148 148 145 145 105 105 105 105 105 105 132 135 135 170 170 170 170 170 170 215 215 215 215 215 215 215 215 215 – 195 199 201 203 205 205 207 207 – 235 231 229 227 225 225 223 223 248 245 245 205 205 205 205 205 205 207 210 210 245 245 245 245 245 245 265 265 265 265 265 265 265 265 265 – 245 249 251 253 255 255 257 257 – 285 275 275 235 235 235 235 235 278 275 275 235 235 235 235 235 235 252 255 255 280 280 280 280 280 280 NOTES: 1. In Alternate Insert Positions, the Pin Insert rotates clockwise while the Socket Insert rotates counter-clockwise the same number of degrees relative to the centerline of the Master Key or Keyway. 2. In Alternate Key/Keyway Positions, the smaller Plug Keys rotate clockwise with respect to the centerline of the Master Keyway as shown. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] G-27