MIL-DTL-5015 947-056 947-056Pin/Pin Bulkhead Feed-Thru, Hermetic CONNECTOR, RECEPTACLE, THRU BULKHEAD, MIL-DTL-5015 “D” SeriesPIN/PIN Type FOR Connectors MIL-C-5015 "D", HERMETIC, SERIES CONNECTORS PART NUMBER DEVELOPMENT EXAMPLE: B SEE MIL-DTL-5015 D FOR INSERT ARRANGEMENTS SYMETRICAL ONLY CONSULT FACTORY 947 - 056 - 16 12 X PRODUCT SERIES BASIC NO SHELL SIZE, TABLE I INSERT ARRANGEMENT D ALTERNATE POLARIZATION OMIT FOR NORMAL C DIRECTION OF PRESSURE 2 3.33 HOLE FOR .031 DIA SAFETY WIRE, 3 EQUALLY SPACED NOTES: .849 MAX 1. ASSEMBLY IDENTIFIED WITH MANUFACTURER'S NAME AND P/N, SPACE PERMITTING. 2 -6 HERMETICITY - LESS THAN 1 X 10 CC/SEC AT ONE ATMOSHERE. NOT FOR USE IN LIQUID ATMOSPHERE. 3. OUTGAS FOR SPACE APPLICATION. 4. MATERIAL/FINISH: JAM NUT, LOCKRING, SHELL ASSEMBLY - SST./PASSIVATE CONTACTS - ALLOY 52/GOLD PLATE INSULATORS - HIGH-GRADE RIGID DIELECTRIC, FULL GLASS OR GLASS BEAD O-RINGS - SILICONE/N.A. A THREAD - TYP .29 .125 1.50 MAX PANEL ACCOMMODATION TABLE I: CONNECTOR DIMENSIONS SHELL SIZE A THREAD CLASS 2A 08 10 12 14 16 18 20 22 24 28 32 36 1/2-28 UNEF 5/8-24 UNEF 3/4-20 UNEF 7/8-20 UNEF 1 -20 UNEF 1 1/8-18 UNEF 1 1/4-18 UNEF 1 3/8-18 UNEF 1 1/2-18 UNEF 1 3/4-18 UNEF 2 -18 UNEF 2 1/4-16 UN © 2004 Glenair, Inc. B DIA MAX C HEX D FLATS 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.750 (44.5) 1.875 (47.6) 2.000 (50.8) 2.188 (55.6) 2.438 (61.9) 2.688 (68.3) 2.938 (74.6) .688 (17.5) .812 (20.6) .938 (23.8) 1.062 (27.0) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 2.000 (50.8) 2.250 (57.2) 2.500 (63.5) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.625 (41.3) 1.750 (44.5) 1.875 (47.6) 2.000 (50.8) 2.250 (57.2) 2.500 (63.5) 2.750 (69.9) E DIA F +.015 - .000 ±.005 (±0.1) (+0.4 - 0) .510 (13.0) .460 (11.7) .635 (16.1) .578 (14.7) .760 (19.3) .692 (17.6) .885 (22.5) .817 (20.8) 1.010 (25.7) .942 (23.9) 1.135 (28.8) 1.060 (26.9) 1.260 (32.0) 1.185 (30.1) 1.385 (35.2) 1.310 (33.3) 1.510 (38.4) 1.435 (36.4) 1.760 (44.7) 1.687 (42.8) 2.010 (51.1) 1.937 (49.2) 2.260 (57.4) 2.177 (55.3) CAGE CODE 06324 F E RECOMMENDED PANEL CUT-OUT Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-19 E-Mail: [email protected]