EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 1.9mm Round Subminiature Lead LEDs 95-21UBC/C430/TRXX Features ․Package in 12mm tape on 7" diameter reels. ․Compatible with automatic placement equipment. ․EIA Std. package. ․Mono-color type. ․Pb-free ․The product itself will remain within RoHS F1 F2 95-21 F7/TR7 F9/TR9 F10/TR10 compliant version. Descriptions ․The 95-21 SMD taping is much smaller than leaded components .Thus enable smaller board size. Higher packing density. Reduced storage space and finally smaller equipment to be obtained. ․Besides, light weight makes them ideal for miniature applications. ․Furthermore by automation assembly machines the accuracy is anticipated. Applications ․Small indicator for indoor applications. ․Flat backlight for LCD, switches and symbols. ․Indicator and backlight in office equipment. ․Indicator and backlight for battery driven equipment. ․Indicator and backlight for audio and video equipment. ․Automotive : backlighting in dashboards and switches. ․Telecommunication：indicator and backlighting in telephone and fax. Device Selection Guide Chip Material Emitted Color GaN/SiC Blue Lens Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 1 of 10 Device No. : SZDLE-952-011 Prepared date: 07-29-2005 Prepared by: Aihua hong EVERLIGHT ELECTRONICS CO.,LTD. 95-21UBC/C430/TRXX Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 2 of 10 Device No. : SZDLE-952-011 Prepared date: 07-29-2005 Prepared by: Aihua hong EVERLIGHT ELECTRONICS CO.,LTD. 95-21UBC/C430/TRXX Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Soldering Temperature Tsol 260( for 5 second) ℃ Electrostatic Discharge ESD 1000 V Power Dissipation Pd 140 mW Peak Forward Current (Duty 1/10 @ 1KHz) IFP 70 mA Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 3 of 10 Device No. : SZDLE-952-011 Prepared date: 07-29-2005 Prepared by: Aihua hong EVERLIGHT ELECTRONICS CO.,LTD. 95-21UBC/C430/TRXX Electro-Optical Characteristics (Ta=25℃) Parameter Symbol MIN. TYP. MAX. Unit Luminous Intensity IV 160 203 ---- mcd Viewing Angle 2θ1/2 ---- 25 ---- deg Peak Wavelength λp ---- 428 ---- nm Dominant Wavelength Spectrum Radiation Bandwidth λd ---- 466 ---- nm △λ ---- 65 ---- nm Forward Voltage VF ---- 3.8 4.5 V Reverse Current IR ---- ---- 10 μE Condition IF=20mE VR=5V Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 4 of 10 Device No. : SZDLE-952-011 Prepared date: 07-29-2005 Prepared by: Aihua hong EVERLIGHT ELECTRONICS CO.,LTD. 95-21UBC/C430/TRXX Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 5 of 10 Device No. : SZDLE-952-011 Prepared date: 07-29-2005 Prepared by: Aihua hong EVERLIGHT ELECTRONICS CO.,LTD. 95-21UBC/C430/TRXX Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank xxxxxx xxxxxx REF: Forward Voltage Rank RoHS xxxxxxxxxxxx xxxx xxxxxxxx Reel & Carrier Tape Dimensions Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 6 of 10 Device No. : SZDLE-952-011 Prepared date: 07-29-2005 Prepared by: Aihua hong EVERLIGHT ELECTRONICS CO.,LTD. 95-21UBC/C430/TRXX Loaded quantity per reel 1000 PCS/reel 1 Unit = mm Moisture Resistant Packaging Label Aluminum moistue-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 7 of 10 Device No. : SZDLE-952-011 Prepared date: 07-29-2005 Prepared by: Aihua hong EVERLIGHT ELECTRONICS CO.,LTD. 95-21UBC/C430/TRXX Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level : 90 % LTPD : 10 % Test Sample No. Items Test Condition Ac/Re Hours/Cycles Size Temp. : 260℃±5℃ 6 Min. 22 Pcs. 0/1 1 Reflow Soldering Min. 5 sec. 2 3 4 5 Temperature Cycle H : +100℃ 15 min. ∫ 5 min. L : -40℃ 15 min. 300 Cycles 22 Pcs. 0/1 Thermal Shock H : +100℃ 5 min. ∫ 10 sec. L : -10℃ 5 min. 300 Cycles 22 Pcs. 0/1 Temp. : 100℃ 1000 Hrs. 22 Pcs. 0/1 Temp. : -40℃ 1000 Hrs. 22 Pcs. 0/1 High Temperature Storage Low Temperature Storage 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 Pcs. 0/1 7 High Temperature / High Humidity 85℃/ 85% RH 1000 Hrs. 22 Pcs. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 8 of 10 Device No. : SZDLE-952-011 Prepared date: 07-29-2005 Prepared by: Aihua hong EVERLIGHT ELECTRONICS CO.,LTD. 95-21UBC/C430/TRXX Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 9 of 10 Device No. : SZDLE-952-011 Prepared date: 07-29-2005 Prepared by: Aihua hong EVERLIGHT ELECTRONICS CO.,LTD. 95-21UBC/C430/TRXX 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 10 of 10 Device No. : SZDLE-952-011 Prepared date: 07-29-2005 Prepared by: Aihua hong