IDT 951464AGLF

Programmable System Clock Chip for ATI RS/RD690 K8TM
- based Systems
Recommended Application:
Key Specifications:
ATI RS/RD690 systems using AMD K8 processors & SB600
Southbridge
•
•
•
•
Output Features:
•
•
•
•
•
•
2
6
2
1
2
3
- 0.7V current-mode differential CPU pairs
- 0.7V current-mode differential SRC pairs
- 0.7V current-mode differential ATIG pairs
- HyperTransport clock seed
- 48MHz USB clock
- 14.318MHz Reference clock
ICS951464
CPU outputs cycle-to-cycle jitter < 85ps
SRC outputs cycle-to-cycle jitter < 125ps
ATIG outputs cycle-to-cycle jitter < 125ps
+/- 300ppm frequency accuracy on CPU, SRC & ATIG
clocks
Features/Benefits:
•
•
•
•
•
3 - Programmable Clock Request pins for SRC and ATIG
clocks
ATIGCLKs are programmable for frequency
Spread Spectrum for EMI reduction
Outputs may be disabled via SMBus
External crystal load capacitors for maximum frequency
accuracy
GNDREF
VDDREF
X1
X2
VDD48
48MHz_0
48MHz_1
GND48
SMBCLK
SMBDAT
RESET_IN#
SRCCLKT7
SRCCLKC7
VDDSRC
GNDSRC
SRCCLKT6
SRCCLKC6
SRCCLKT5
SRCCLKC5
SRCCLKT4
SRCCLKC4
GNDSRC
VDDSRC
SRCCLKT2
SRCCLKC2
VDDSRC
GNDSRC
*CLKREQB#
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
951464AGLF
Pin Configuration
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
FS0/REF0
FS1/REF1
FS2/REF2
**PD
VDDHTT
HTTCLK0
GNDHTT
*CLKREQA#
CPUCLK8T0
CPUCLK8C0
VDDCPU
GNDCPU
CPUCLK8T1
CPUCLK8C1
VDDA
GNDA
IREF
SRCCLKT0
SRCCLKC0
GNDSRC
VDDSRC
ATIGCLKT0
ATIGCLKC0
VDDATIG
GNDATIG
ATIGCLKT1
ATIGCLKC1
*CLKREQC#
56-Pin SSOP/TSSOP
Note: Pins preceeded by * have a 120 Kohm Internal Pull Up resistor
Pins preceeded by ** have a 120 Kohm Internal Pull Down resistor
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
1
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
Pin Description
PIN #
PIN NAME
TYPE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
GNDREF
VDDREF
X1
X2
VDD48
48MHz_0
48MHz_1
GND48
SMBCLK
SMBDAT
RESET_IN#
SRCCLKT7
SRCCLKC7
VDDSRC
GNDSRC
SRCCLKT6
SRCCLKC6
SRCCLKT5
SRCCLKC5
SRCCLKT4
SRCCLKC4
GNDSRC
VDDSRC
SRCCLKT2
SRCCLKC2
VDDSRC
GNDSRC
PWR
PWR
IN
OUT
PWR
OUT
OUT
PWR
IN
I/O
IN
OUT
OUT
PWR
PWR
OUT
OUT
OUT
OUT
OUT
OUT
PWR
PWR
OUT
OUT
PWR
PWR
28
*CLKREQB#
IN
DESCRIPTION
Ground pin for the REF outputs.
Ref, XTAL power supply, nominal 3.3V
Crystal input, Nominally 14.318MHz.
Crystal output, Nominally 14.318MHz
Power pin for the 48MHz output.3.3V
48MHz clock output.
48MHz clock output.
Ground pin for the 48MHz outputs
Clock pin of SMBUS circuitry, 5V tolerant
Data pin of SMBUS circuitry, 5V tolerant
Real time active low input. When active, SMBus is reset to power up default.
True clock of differential SRC clock pair.
Complement clock of differential SRC clock pair.
Supply for SRC clocks, 3.3V nominal
Ground pin for the SRC outputs
True clock of differential SRC clock pair.
Complement clock of differential SRC clock pair.
True clock of differential SRC clock pair.
Complement clock of differential SRC clock pair.
True clock of differential SRC clock pair.
Complement clock of differential SRC clock pair.
Ground pin for the SRC outputs
Supply for SRC clocks, 3.3V nominal
True clock of differential SRC clock pair.
Complement clock of differential SRC clock pair.
Supply for SRC clocks, 3.3V nominal
Ground pin for the SRC outputs
Output enable for PCI Express (SRC) outputs. SMBus selects which outputs are controlled.
0 = enabled, 1 = tri-stated
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
2
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
Pin Description (Continued)
PIN #
PIN NAME
TYPE
29
*CLKREQC#
IN
30
31
32
33
34
35
36
37
38
39
ATIGCLKC1
ATIGCLKT1
GNDATIG
VDDATIG
ATIGCLKC0
ATIGCLKT0
VDDSRC
GNDSRC
SRCCLKC0
SRCCLKT0
OUT
OUT
PWR
PWR
OUT
OUT
PWR
PWR
OUT
OUT
40
IREF
OUT
41
42
43
44
45
46
47
48
GNDA
VDDA
CPUCLK8C1
CPUCLK8T1
GNDCPU
VDDCPU
CPUCLK8C0
CPUCLK8T0
PWR
PWR
OUT
OUT
PWR
PWR
OUT
OUT
49
*CLKREQA#
IN
50
51
52
GNDHTT
HTTCLK0
VDDHTT
53
**PD
IN
54
55
56
FS2/REF2
FS1/REF1
FS0/REF0
I/O
I/O
I/O
PWR
OUT
PWR
DESCRIPTION
Output enable for PCI Express (SRC) outputs. SMBus selects which outputs are controlled.
0 = enabled, 1 = tri-stated
Complementary clock of differential ATIGCLK clock pair.
True clock of differential ATIGCLK clock pair.
Ground for ATIG clocks
Power supply ATIG clocks, nominal 3.3V
Complementary clock of differential ATIGCLK clock pair.
True clock of differential ATIGCLK clock pair.
Supply for SRC clocks, 3.3V nominal
Ground pin for the SRC outputs
Complement clock of differential SRC clock pair.
True clock of differential SRC clock pair.
This pin establishes the reference current for the differential current-mode output pairs. This
pin requires a fixed precision resistor tied to ground in order to establish the appropriate
current. 475 ohms is the standard value.
Ground pin for the PLL core.
3.3V power for the PLL core.
Complementary clock of differential 3.3V push-pull K8 pair.
True clock of differential 3.3V push-pull K8 pair.
Ground pin for the CPU outputs
Supply for CPU clocks, 3.3V nominal
Complementary clock of differential 3.3V push-pull K8 pair.
True clock of differential 3.3V push-pull K8 pair.
Output enable for PCI Express (SRC) outputs. SMBus selects which outputs are controlled.
0 = enabled, 1 = tri-stated
Ground pin for the HTT outputs
3.3V Hyper Transport output
Supply for HTT clocks, nominal 3.3V.
Asynchronous active high input pin used to power down the device. The internal clocks are
disabled and the VCO is stopped.
Frequency select latch input pin / 14.318 MHz reference clock.
Frequency select latch input pin / 14.318 MHz reference clock.
Frequency select latch input pin / 14.318 MHz reference clock.
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
3
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
General Description
The ICS951464 is a main clock synthesizer chip that provides all clocks required for ATI RS/RD690-based
systems. An SMBus interface allows full control of the device.
Block Diagram
REF(2:0)
X1
X2
Xtal
Osc.
48MHz(1:0)
Fixed PLL
HTTCLK0
SRCCLK(7:0)
FS(2:0)
CLKREQA#
CLKREQB#
CLKREQC#
RESET_IN#
Control
Logic
Programmable
Spread
PLLs
Programmable
Dividers
CPUCLK(2:0)
SMBDAT
SMBCLK
ATIGCLK(2:0)
IREF
951464 Power Group Table
VDD Pin# GND Pin#
2
1
5
8
14,26
15,27
23
22
36
37
33
32
42
41
46
45
52
50
Description
Crsytal, REF VDD & VSS I/O & Core
48M Core and Output; FIX PLL Analog/Digital
SRC I/O & Core
SRC I/O & Core; SRC PLL Digital
SRC I/O & Core; SRC PLL Analog
ATIG I/O & Core; ATIG PLL Analog/Digital
CPU PLL Analog
CPU I/O & Core; CPU PLL Digital
HTT I/O & Core
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
4
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
Table1: CPU and HTT Frequency Selection Table
Byte 0
Bit4 Bit3 Bit2 Bit1 Bit0 CPUCLK
HTT
Spread Overclock
(2:0)
CPU CPU CPU CPU CPU
(MHz)
%
%
(MHz)
SS_EN FS3 FS2 FS1 FS0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Hi-Z
X/2
230.00
240.00
100.00
133.33
166.67
200.00
250.00
260.00
270.00
280.00
102.00
136.00
170.00
204.00
210.00
220.00
230.00
240.00
100.00
133.33
166.67
200.00
250.00
260.00
270.00
280.00
102.00
136.00
170.00
204.00
Hi-Z
X/3
76.67
80.00
66.67
66.67
66.67
66.67
83.33
86.67
90.00
93.33
68.00
68.00
68.00
68.00
70.00
73.33
76.67
80.00
66.67
66.67
66.67
66.67
83.33
86.67
90.00
93.33
68.00
68.00
68.00
68.00
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
15%
20%
0%
25%
30%
35%
40%
2%
5%
10%
15%
20%
0%
25%
30%
35%
40%
2%
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
5
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
Table2: SRC Frequency Selection Table
Byte 5
Byte 0
SRC
Bit 5 Bit3 Bit2 Bit1 Bit0
SRC SRC SRC SRC SRC (MHz)
SS_EN FS3 FS2 FS1 FS0
0
0
0
0
0
100.00
0
0
0
0
1
101.00
0
0
0
1
0
102.00
0
0
0
1
1
103.00
0
0
1
0
0
104.00
0
0
1
0
1
105.00
0
0
1
1
0
106.00
0
0
1
1
1
107.00
0
1
0
0
0
100.00
0
1
0
0
1
101.00
0
1
0
1
0
102.00
0
1
0
1
1
103.00
0
1
1
0
0
104.00
0
1
1
0
1
105.00
0
1
1
1
0
106.00
0
1
1
1
1
107.00
1
0
0
0
0
100.00
1
0
0
0
1
101.00
1
0
0
1
0
102.00
1
0
0
1
1
103.00
1
0
1
0
0
104.00
1
0
1
0
1
105.00
1
0
1
1
0
106.00
1
0
1
1
1
107.00
1
1
0
0
0
100.00
1
1
0
0
1
101.00
1
1
0
1
0
102.00
1
1
0
1
1
103.00
1
1
1
0
0
104.00
1
1
1
0
1
105.00
1
1
1
1
0
106.00
1
1
1
1
1
107.00
SRC
Spread
OverClock
%
%
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-0.25%
-0.25%
-0.25%
-0.25%
-0.25%
-0.25%
-0.25%
-0.25%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
0%
1%
2%
3%
4%
5%
6%
7%
0%
1%
2%
3%
4%
5%
6%
7%
0%
1%
2%
3%
4%
5%
6%
7%
0%
1%
2%
3%
4%
5%
6%
7%
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
6
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
Table3: ATIG Frequency Selection Table
Byte 9
Byte 0
Bit 6 Bit4 Bit3 Bit1 Bit0
ATIG
(MHz)
ATIG ATIG ATIG ATIG ATIG
SS_EN FS3 FS2 FS1 FS0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
100.00
105.00
110.00
115.00
120.00
125.00
130.00
135.00
100.00
105.00
110.00
115.00
120.00
125.00
130.00
135.00
100.00
105.00
110.00
115.00
120.00
125.00
130.00
135.00
100.00
105.00
110.00
115.00
120.00
125.00
130.00
135.00
ATIG
Spread
OverClock
%
%
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-0.25%
-0.25%
-0.25%
-0.25%
-0.25%
-0.25%
-0.25%
-0.25%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
0%
5%
10%
15%
20%
25%
30%
35%
0%
5%
10%
15%
20%
25%
30%
35%
0%
5%
10%
15%
20%
25%
30%
35%
0%
5%
10%
15%
20%
25%
30%
35%
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
7
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
Divider (1:0)
Table 4: CPU Divider Ratios
B19b(7:4)
00
Bit
00
0000
01
0001
10
0010
11
0011
Address
LSB
Divider (1:0)
Table 5: HTT Divider Ratios
B20b(3:0)
00
Bit
00
0000
01
0001
10
0010
11
0011
Address
LSB
Divider (1:0)
Table 6: ATIG Divider Ratios
B19b(3:0)
00
Bit
00
0000
01
0001
10
0010
11
0011
Address
LSB
2
3
5
15
Div
Divider (3:2)
01
10
0100
4
1000
0101
6
1001
0110
10
1010
0111
30
1011
Address
Address
8
12
20
60
Div
11
1100
1101
1110
1111
Address
MSB
16
24
40
120
Div
10
1000
1001
1010
1011
Address
16
12
20
60
Div
11
1100
1101
1110
1111
Address
MSB
32
24
40
120
Div
10
1000
1001
1010
1011
Address
8
12
20
28
Div
11
1100
1101
1110
1111
Address
MSB
16
24
40
56
Div
Divider (3:2)
4
3
5
15
Div
01
0100
0101
0110
0111
Address
8
6
10
30
Divider (3:2)
2
3
5
7
Div
01
0100
0101
0110
0111
Address
4
6
10
14
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
8
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
General SMBus serial interface information for the ICS951464
How to Write:
How to Read:
Controller (host) sends a start bit.
Controller (host) sends the write address D2 (H)
ICS clock will acknowledge
Controller (host) sends the begining byte location = N
ICS clock will acknowledge
Controller (host) sends the data byte count = X
ICS clock will acknowledge
Controller (host) starts sending Byte N through
Byte N + X -1
• ICS clock will acknowledge each byte one at a time
• Controller (host) sends a Stop bit
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Controller (host) will send start bit.
Controller (host) sends the write address D2 (H)
ICS clock will acknowledge
Controller (host) sends the begining byte
location = N
ICS clock will acknowledge
Controller (host) will send a separate start bit.
Controller (host) sends the read address D3 (H)
ICS clock will acknowledge
ICS clock will send the data byte count = X
ICS clock sends Byte N + X -1
ICS clock sends Byte 0 through byte X (if X(H)
was written to byte 8).
Controller (host) will need to acknowledge each byte
Controllor (host) will send a not acknowledge bit
Controller (host) will send a stop bit
Index Block Write Operation
Controller (Host)
starT bit
T
Slave Address D2(H)
WR
WRite
Index Block Read Operation
Controller (Host)
T
starT bit
Slave Address D2(H)
WR
WRite
ICS (Slave/Receiver)
ICS (Slave/Receiver)
ACK
ACK
Beginning Byte = N
Beginning Byte = N
ACK
ACK
RT
Repeat starT
Slave Address D3(H)
RD
ReaD
Data Byte Count = X
ACK
Beginning Byte N
ACK
X Byte
ACK
Data Byte Count = X
ACK
Beginning Byte N
Byte N + X - 1
ACK
X Byte
ACK
P
stoP bit
Byte N + X - 1
N
P
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
9
Not acknowledge
stoP bit
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
SMBus Table: Spread Spectrum Enable and CPU Frequency Select Register
Byte 0
Pin #
Name
Control Function
Type
Latched Input or SMBus
RW
FS Source
Bit 7
Frequency Select
ATIG SS_EN
ATIG Spread Spectrum Enable
RW
Bit 6
SRC
SS_EN
SRC
Spread
Spectrum
Enable
RW
Bit 5
CPU SS_EN
CPU Spread Spectrum Enable
RW
Bit 4
CPU FS3
CPU Freq Select Bit 3
RW
Bit 3
CPU FS2
CPU Freq Select Bit 2
RW
Bit 2
CPU FS1
CPU Freq Select Bit 1
RW
Bit 1
CPU FS0
CPU Freq Select Bit 0
RW
Bit 0
Note: Each Spread Spectrum Enable bit is independent from the other.
Bit(6:4) must all set to "1" in order to enable spread for CPU, SRC and ATIG clocks.
SMBus Table: Output Control Register
Byte 1
Pin #
Name
7
48MHz_1
Bit 7
6
48MHz_0
Bit 6
54
REF2
Bit 5
55
REF1
Bit 4
56
REF0
Bit 3
51
HTTCLK0
Bit 2
44,43
CPUCLK1
Bit 1
48,47
CPUCLK0
Bit 0
Control Function
48MHz_1 Output Enable
48MHz_0 Output Enable
REF2 Output Enable
REF1 Output Enable
REF0 Output Enable
HTTCLK0 Output Enable
CPUCLK1 Output Enable
CPUCLK0 Output Enable
SMBus Table: ATIGCLK and CLKREQB# Output Control Register
Byte 2
Pin #
Name
Control Function
Reserved
Bit 7
Reserved
Bit 6
31,30
ATIGCLK1
ATIGCLK1 Output Enable
Bit 5
35,34
ATIGCLK0
ATIGCLK0 Output Enable
Bit 4
Bit 3
20,21
REQBSRC4
Bit 0
1
PWD
SMBus
0
Enable
Enable
Enable
0
0
0
0
Latch
Latch
Latch
See Table 1:
CPU Frequency Selection
Table
Type
RW
RW
RW
RW
RW
RW
RW
RW
0
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
1
Enable
Enable
Enable
Enable
Enable
Enable
Enable
Enable
PWD
1
1
1
1
1
1
1
1
Type
0
1
RW
RW
Disable
Disable
Does not
control
Enable
Enable
PWD
1
1
1
1
Controls
0
RW
Reserved
Bit 2
Bit 1
CLKREQB# Controls SRC4
0
Latched
Inputs
Disable
Disable
Disable
24,25
REQBSRC2
CLKREQB# Controls SRC2
0
RW
Does not
control
Controls
Reserved
SMBus Table: SRCCLK Output Control Register
Byte 3
Pin #
Name
Control Function
12,13
SRCCLK7
Bit 7
16,17
SRCCLK6
Bit 6
18,19
SRCCLK5
Bit 5
Master Output control. Enables
20,21
SRCCLK4
Bit 4
or disables output, regardless of
Reserved
Bit 3
CLKREQ# inputs.
24,25
SRCCLK2
Bit 2
Reserved
Bit 1
39,38
SRCCLK0
Bit 0
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
10
0
0
Type
RW
RW
RW
RW
RW
RW
0
Disable
Disable
Disable
Disable
Reserved
Disable
Reserved
Disable
1
Enable
Enable
Enable
Enable
Enable
Enable
PWD
1
1
1
1
1
1
1
1
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
SMBus Table: CLKREQA# and CLKREQC# Output Control Register
Byte 4
Pin #
Name
Control Function
Type
Bit 7
12,13
REQASRC7
CLKREQA# Controls SRC7
RW
Bit 6
16,17
REQASRC6
CLKREQA# Controls SRC6
RW
Bit 5
18,19
REQASRC5
CLKREQA# Controls SRC5
RW
PWD
Controls
0
Controls
0
Controls
0
0
0
Bit 2
31,30
REQCATIG1
CLKREQC# Controls ATIG1
RW
Bit 1
35,34
REQCATIG0
CLKREQC# Controls ATIG0
RW
Bit 0
39,38
REQCSRC0
CLKREQC# Controls SRC0
RW
SMBus Table: CPU Stop Control and SRC Frequency Select Register
Byte 5
Pin #
Name
Control Function
Reserved
Bit 7
Reserved
Bit 6
Reserved
Bit 5
SRC, Differential Output Disable
Hi-Z or Driven when disable
Bit 4
ATIG
Mode
SRC FS3
SRC Freq Select Bit 3
Bit 3
Bit 1
Bit 0
1
Reserved
Reserved
Bit 4
Bit 3
Bit 2
0
Does not
control
Does not
control
Does not
control
-
SRC FS2
SRC FS1
SRC FS0
SMBus Table: Device ID Register
Byte 6
Pin #
Name
Device ID7 (MSB)
Bit 7
Device ID6
Bit 6
Device ID5
Bit 5
Device ID4
Bit 4
Device ID3
Bit 3
Device ID2
Bit 2
Device ID1
Bit 1
Device ID0 (LSB)
Bit 0
SMBus Table: Revision and Vendor ID Register
Byte 7
Pin #
Name
RID3
Bit 7
RID2
Bit 6
RID1
Bit 5
RID0
Bit 4
VID3
Bit 3
VID2
Bit 2
VID1
Bit 1
VID0
Bit 0
Does not
control
Does not
control
Does not
control
Controls
0
Controls
0
Controls
0
Type
0
1
PWD
0
0
0
RW
Driven
Hi-Z
0
RW
See Table 2:
SRC Frequency Selection
Table
0
SRC Freq Select Bit 2
SRC Freq Select Bit 1
SRC Freq Select Bit 0
RW
RW
RW
Control Function
Type
R
R
R
R
R
R
R
R
0
-
1
-
PWD
0
1
1
0
0
0
1
0
Type
R
R
R
R
R
R
R
R
0
-
1
-
PWD
x
x
x
x
0
0
0
1
DEVICE ID
Control Function
REVISION ID
VENDOR ID
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
11
0
0
0
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
SMBus Table: Byte Count Register
Byte 8
Pin #
Name
BC7
Bit 7
BC6
Bit 6
BC5
Bit 5
BC4
Bit 4
BC3
Bit 3
BC2
Bit 2
BC1
Bit 1
BC0
Bit 0
Control Function
Byte Count Programming b(7:0)
Type
RW
RW
RW
RW
RW
RW
RW
RW
0
1
PWD
0
0
0
Writing to this register will
0
congiure how many bytes will
be read back, default is 9
1
bytes.
0
0
1
SMBus Table: REF2, 48MHz Output Strength Control and ATIG Frequency Select Register
Byte 9
Pin #
Name
Control Function
Type
0
1
54
REF2Str
REF2 Strength Control
RW
1X
2X
Bit 7
7
48MHz_1Str
48MHz_1 Strength Control
RW
1X
2X
Bit 6
6
48MHz_0Str
48MHz_0 Strength Control
RW
1X
2X
Bit 5
Reserved
Bit 4
ATIG FS3
ATIG Freq Select Bit 3
RW
Bit 3
ATIG FS2
ATIG Freq Select Bit 2
RW
See Table 3: ATIG
Bit 2
Frequency Selection Table
ATIG FS1
ATIG Freq Select Bit 1
RW
Bit 1
ATIG FS0
ATIG Freq Select Bit 0
RW
Bit 0
PWD
1
1
1
0
0
0
0
0
SMBus Table: PLLs M/N Programming Enable and REF1, REF0 Output Strength Control Register
Byte 10 Pin #
Name
Control Function
Type
0
M/N_EN
PLLs M/N Programming Enable
RW
Disable
Bit 7
55
REF1Str
REF1 Strength Control
RW
1X
Bit 6
56
REF0Str
REF0 Strength Control
RW
1X
Bit 5
Reserved
Bit 4
Reserved
Bit 3
Reserved
Bit 2
Reserved
Bit 1
Reserved
Bit 0
1
Enable
2X
2X
PWD
0
1
1
0
0
0
0
0
1
PWD
X
X
X
X
X
X
X
X
SMBus Table: CPU PLL VCO Frequency Control Register
Byte 11 Pin #
Name
Control Function
N Div8
N Divider Prog bit 8
Bit 7
N Div 9
N Divider Prog bit 9
Bit 6
M Div5
Bit 5
M Div4
Bit 4
M Div3
Bit 3
M Divider Programming bits
M Div2
Bit 2
M Div1
Bit 1
M Div0
Bit 0
Type
RW
RW
RW
RW
RW
RW
RW
RW
The decimal representation of
M and N Divier in Byte 11 and
12 will configure the VCO
frequency. Default at power
up = latch-in or Byte 0 Rom
table. VCO Frequency =
14.318 x [NDiv(9:0)+8] /
[MDiv(5:0)+2]
SMBus Table: CPU PLL VCO Frequency Control Register
Byte 12 Pin #
Name
Control Function
N Div7
Bit 7
N Div6
Bit 6
N Div5
Bit 5
N Div4
Bit 4
N Divider Programming b(7:0)
N Div3
Bit 3
N Div2
Bit 2
N Div1
Bit 1
N Div0
Bit 0
Type
RW
RW
RW
RW
RW
RW
RW
RW
The decimal representation of
M and N Divier in Byte 11 and
12 will configure the VCO
frequency. Default at power
up = latch-in or Byte 0 Rom
table. VCO Frequency =
14.318 x [NDiv(9:0)+8] /
[MDiv(5:0)+2]
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
12
0
0
1
PWD
X
X
X
X
X
X
X
X
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
SMBus Table: CPU PLL Spread Spectrum Control Register
Byte 13 Pin #
Name
Control Function
SSP7
Bit 7
SSP6
Bit 6
SSP5
Bit 5
SSP4
Spread Spectrum Programming
Bit 4
b(7:0)
SSP3
Bit 3
SSP2
Bit 2
SSP1
Bit 1
SSP0
Bit 0
SMBus Table: CPU PLL Spread Spectrum Control Register
Byte 14 Pin #
Name
Control Function
Reserved
Bit 7
SSP14
Bit 6
SSP13
Bit 5
SSP12
Bit 4
Spread Spectrum Programming
SSP11
Bit 3
b(14:8)
SSP10
Bit 2
SSP9
Bit 1
SSP8
Bit 0
Type
RW
RW
RW
RW
RW
RW
RW
RW
Type
RW
RW
RW
RW
RW
RW
RW
SMBus Table: ATIG PLL VCO Frequency Control Register
Byte 15 Pin #
Name
Control Function
N Div8
N Divider Prog bit 8
Bit 7
N Div9
N Divider Prog bit 9
Bit 6
M Div5
Bit 5
M Div4
Bit 4
M Div3
Bit 3
M Divider Programming bits
M Div2
Bit 2
M Div1
Bit 1
M Div0
Bit 0
Type
RW
RW
RW
RW
RW
RW
RW
RW
SMBus Table: ATIG PLL VCO Frequency Control Register
Byte 16 Pin #
Name
Control Function
N Div7
Bit 7
N Div6
Bit 6
N Div5
Bit 5
N Div4
Bit 4
N Divider Programming b(7:0)
N Div3
Bit 3
N Div2
Bit 2
N Div1
Bit 1
N Div0
Bit 0
Type
RW
RW
RW
RW
RW
RW
RW
RW
SMBus Table: ATIG PLL Spread Spectrum Control Register
Byte 17 Pin #
Name
Control Function
SSP7
Bit 7
SSP6
Bit 6
SSP5
Bit 5
SSP4
Spread Spectrum Programming
Bit 4
b(7:0)
SSP3
Bit 3
SSP2
Bit 2
SSP1
Bit 1
SSP0
Bit 0
Type
RW
RW
RW
RW
RW
RW
RW
RW
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
13
0
1
PWD
X
X
These Spread Spectrum bits
in Byte 13 and 14 will program X
X
the spread pecentage. It is
recommended to use ICS
X
Spread % table for spread
X
programming.
X
X
0
1
0
1
0
1
0
1
PWD
0
X
These Spread Spectrum bits
X
in Byte 13 and 14 will program
X
the spread pecentage. It is
X
recommended to use ICS
X
Spread % table for spread
X
programming.
X
PWD
X
The decimal representation of
X
M and N Divier in Byte 17 and
X
18 will configure the VCO
X
frequency. Default at power
X
up = Byte 0 Rom table. VCO
X
Frequency = 14.318 x
X
[NDiv(9:0)+8] / [MDiv(5:0)+2]
X
PWD
X
The decimal representation of
X
M and N Divier in Byte 17 and
X
18 will configure the VCO
X
frequency. Default at power
X
up = Byte 0 Rom table. VCO
X
Frequency = 14.318 x
X
[NDiv(9:0)+8] / [MDiv(5:0)+2]
X
PWD
X
X
These Spread Spectrum bits
in Byte 19 and 20 will program X
X
the spread pecentage. It is
recommended to use ICS
X
Spread % table for spread
X
programming.
X
X
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
SMBus Table: ATIG PLL Spread Spectrum Control Register
Byte 18 Pin #
Name
Control Function
Reserved
Bit 7
SSP14
Bit 6
SSP13
Bit 5
SSP12
Bit 4
Spread Spectrum Programming
SSP11
Bit 3
b(14:8)
SSP10
Bit 2
SSP9
Bit 1
SSP8
Bit 0
SMBus Table: CPU and ATIG Divider Ratio Programming Bits Select Register
Byte 19 Pin #
Name
Control Function
CPU_Div3
Bit 7
CPU_Div2
CPU_Divider Ratio
Bit 6
Programming Bits
CPU_Div1
Bit 5
CPU_Div0
Bit 4
ATIG_Div3
Bit 3
ATIG_Div2
ATIG_Divider Ratio
Bit 2
Programming Bits
ATIG_Div1
Bit 1
Bit 0
-
ATIG_Div0
SMBus Table: HTT Divider Ratio Programming Bits Select Register
Byte 20 Pin #
Name
Control Function
Reserved
Bit 7
Reserved
Bit 6
Reserved
Bit 5
Reserved
Bit 4
HTT_Div3
Bit 3
HTT_Div2
HTT_Divider Ratio
Bit 2
Programming Bits
HTT_Div1
Bit 1
HTT_Div0
Bit 0
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
14
Type
RW
RW
RW
RW
RW
RW
RW
Type
RW
RW
RW
RW
RW
RW
RW
RW
Type
RW
RW
RW
RW
0
1
PWD
0
X
These Spread Spectrum bits
X
in Byte 19 and 20 will program
X
the spread pecentage. It is
X
recommended to use ICS
X
Spread % table for spread
X
programming.
X
0
1
See Table 4:
CPU Divider Ratios
See Table 5:
ATIG Divider Ratios
0
1
See Table 6:
HTT Divider Ratios
PWD
X
X
X
X
X
X
X
X
PWD
0
0
0
0
X
X
X
X
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
Absolute Max
1
PARAMETER
SYMBOL
CONDITIONS
3.3V Core Supply Voltage
VDD_A
-
3.3V Logic Input Supply
Voltage
VDD_In
-
Storage Temperature
Ts
Ambient Operating Temp
MIN
TYP
MAX
UNITS
Notes
VDD + 0.5V
V
1
GND 0.5
VDD + 0.5V
V
1
-
-65
150
°
1
Tambient
-
0
70
°C
1
Case Temperature
Tcase
-
115
°C
1
Input ESD protection HBM
ESD prot
-
V
1
2000
C
Guaranteed by design and characterization, not 100% tested in production.
Electrical Characteristics - Input/Supply/Common Output Parameters
PARAMETER
SYMBOL
CONDITIONS*
MIN
MAX
UNITS
Notes
Input High Voltage
VIH
3.3 V +/-5%
2
VDD + 0.3
V
1
Input Low Voltage
VIL
3.3 V +/-5%
VSS - 0.3
0.8
V
1
Input High Current
IIH
VIN = VDD
-5
5
uA
1
-5
uA
1
-200
uA
1
IIL1
Input Low Current
IIL2
Low Threshold InputHigh Voltage
Low Threshold InputLow Voltage
Operating Current
Powerdown Current
VIN = 0 V; Inputs with no pull-up
resistors
VIN = 0 V; Inputs with pull-up
resistors
TYP
VIH_FS
3.3 V +/-5%
0.7
VDD + 0.3
V
1
VIL_FS
3.3 V +/-5%
VSS - 0.3
0.35
V
1
1
IDD3.3OP
IDD3.3PD
Input Frequency
Fi
Pin Inductance
Lpin
all outputs driven
400
mA
all diff pairs driven
70
mA
1
all differential pairs tri-stated
12
mA
1
VDD = 3.3 V
14.31818
MHz
2
7
nH
1
CIN
Logic Inputs
5
pF
1
COUT
Output pin capacitance
6
pF
1
CINX
5
pF
1
1.8
ms
1
33
kHz
1
300
us
1
Tfall_PD
X1 & X2 pins
From VDD Power-Up or deassertion of PD to 1st clock
Triangular Modulation
CPU output enable after
PD de-assertion
PD fall time of
5
ns
1
Trise_PD
PD rise time of
5
ns
1
5.5
V
1
0.4
V
1
mA
1
1000
ns
1
300
ns
1
Input Capacitance
Clk Stabilization
TSTAB
Modulation Frequency
Tdrive_PD
SMBus Voltage
30
2.7
VDD
Low-level Output Voltage
VOL
@ IPULLUP
Current sinking at
IPULLUP
VOL = 0.4 V
(Max VIL - 0.15) to
SMBCLK/SMBDAT
TRI2C
(Min VIH + 0.15)
Clock/Data Rise Time
SMBCLK/SMBDAT
(Min VIH + 0.15) to
TFI2C
Clock/Data Fall Time
(Max VIL - 0.15)
*TA = 0 - 70°C; Supply Voltage VDD = 3.3 V +/-5%
4
1
Guaranteed by design and characterization, not 100% tested in production.
Input frequency should be measured at the REF pin and tuned to ideal 14.31818MHz to meet ppm frequency accuracy on PLL
outputs.
2
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
15
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
Electrical Characteristics - K8 Push Pull Differential Pair
TA = 0 - 70°C; VDD = 3.3 V +/-5%; CL =AMD64 Processor Test Load
PARAMETER
SYMBOL
CONDITIONS
MIN
Rising Edge Rate
δV/δt
Falling Edge Rate
δV/δt
Measured at the AMD64
processor's test load. 0 V +/- 400
mV (differential measurement)
Differential Voltage
VDIFF
Change in VDIFF_DC Magnitude
∆VDIFF
-150
Common Mode Voltage
Change in Common Mode
Voltage
VCM
Measured at the AMD64
processor's test load. (singleended measurement)
∆VCM
MAX
UNITS
NOTES
2
10
V/ns
1
2
10
V/ns
1
0.4
1.05
TYP
1.25
1.25
-200
2.3
V
1
150
mV
1
1.45
V
1
200
mV
1
85
ps
1
tjcyc-cyc
Measurement from differential
wavefrom. Maximum difference of
cycle time between 2 adjacent
cycles.
0
Jitter, Accumulated
tja
Measured using the JIT2 software
package with a Tek 7404 scope.
TIE (Time Interval Error)
measurement technique:
Sample resolution = 50 ps,
Sample Duration = 10 µs
-1000
1000
Duty Cycle
dt3
Measurement from differential
wavefrom
45
53
%
1
Output Impedance
RON
Average value during switching
transition. Used for determining
series termination value.
15
55
Ω
1
Group Skew
tsrc-skew
Measurement from differential
wavefrom
50
ps
1
Jitter, Cycle to cycle
50
35
1,2,3
1
Guaranteed by design and characterization, not 100% tested in production.
2
All accumulated jitter specifications are guaranteed assuming that REF is at 14.31818MHz
3
Spread Spectrum is off
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
16
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
Electrical Characteristics - HTTCLK Clock
PARAMETER
SYMBOL
CONDITIONS
MIN
MAX
UNITS
Notes
Long Accuracy
ppm
see Tperiod min-max values
-300
300
ppm
1,2
33.33MHz output nominal
29.9910
30.0090
ns
2
33.33MHz output spread
29.9910
30.1598
ns
2
66.67MHz output nominal
14.9955
15.0045
ns
2
14.9955
15.0799
ns
2
V
1
0.55
V
1
mA
1
-33
mA
1
mA
1
38
mA
1
1
PCI33 Clock period
Tperiod
TYP
HTT66 Clock period
Tperiod
Output High Voltage
VOH
66.67MHz output spread
IOH = -1 mA
Output Low Voltage
VOL
IOL = 1 mA
Output High Current
IOH
Output Low Current
IOL
Edge Rate
δV/δt
Rising edge rate
1
4
V/ns
Edge Rate
δV/δt
tr1
Falling edge rate
VOL = 0.4 V, VOH = 2.4 V
1
4
V/ns
1
0.5
2
ns
1
Rise Time
V
OH @MIN
= 1.0 V
2.4
-33
VOH@ MAX = 3.135 V
VOL @ MIN = 1.95 V
30
VOL @ MAX = 0.4 V
Fall Time
tf1
VOH = 2.4 V, VOL = 0.4 V
0.5
2
ns
1
Duty Cycle
dt1
VT = 1.5 V
45
55
%
1
Jitter, Cycle to cycle
tjcyc-cyc
VT = 1.5 V
180
ps
1
*TA = 0 - 70°C; VDD=3.3V +/-5%; CL = 30 pF (unless otherwise specified)
1
Guaranteed by design and characterization, not 100% tested in production.
2
All Long Term Accuracy and Clock Period specifications are guaranteed with the assumption that REF is at 14.31818MHz
Electrical Characteristics - SRC/ATIG 0.7V Current Mode Differential Pair
PARAMETER
Current Source Output
Impedance
Voltage High
SYMBOL
CONDITIONS*
MIN
Zo
VO = Vx
3000
VHigh
VLow
Statistical measurement on
single ended signal
660
Voltage Low
-150
Max Voltage
Vovs
Min Voltage
Vuds
Crossing Voltage (abs)
Vx(abs)
Crossing Voltage (var)
d-Vx
Long Accuracy
ppm
Measurement on single ended
signal using absolute value.
TYP
MAX
UNITS
Notes
Ω
1
850
mV
1,3
150
mV
1,3
1150
mV
1
-300
250
mV
1
550
mV
1
140
mV
1
1,2
Variation of crossing over all
edges
see Tperiod min-max values
-300
300
ppm
9.9970
10.0030
ns
2
10.0533
ns
2
ns
1,2
Average period
Tperiod
100.00MHz nominal
100.00MHz spread
9.9970
Absolute min period
Tabsmin
tr
100.00MHz nominal/spread
VOL = 0.175V, VOH = 0.525V
9.8720
Rise Time
175
700
ps
1
Fall Time
tf
VOH = 0.525V VOL = 0.175V
175
700
ps
1
Rise Time Variation
d-tr
VOL = 0.175V, VOH = 0.525V
125
ps
1
125
ps
1
55
%
1
100
ps
1
85
ps
1
d-tf
VOH = 0.525V VOL = 0.175V
Measurement from differential
dt3
Duty Cycle
wavefrom
VT = 50%
tsk3
Skew
Measurement from differential
tjcyc-cyc
Jitter, Cycle to cycle
wavefrom
*TA = 0 - 70°C; VDD = 3.3 V +/-5%; CL =2pF, RS=33.2Ω, RP=49.9Ω, ΙREF = 475Ω
Fall Time Variation
45
1
Guaranteed by design and characterization, not 100% tested in production.
2
All Long Term Accuracy and Clock Period specifications are guaranteed assuming that REFOUT is at 14.31818MHz
IREF = VDD/(3xRR). For RR = 475Ω (1%), IREF = 2.32mA. IOH = 6 x IREF and VOH = 0.7V @ ZO=50Ω.
3
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
17
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
Electrical Characteristics - USB - 48MHz
PARAMETER
SYMBOL
CONDITIONS*
MIN
Long Accuracy
ppm
see Tperiod min-max values
-100
TYP
MAX
100
UNITS NOTES
ppm
1,2
Clock period
Tperiod
48.00MHz output nominal
20.8229
20.8344
ns
2
Clock Low Time
Tlow
Measure from < 0.6V
9.3750
11.4580
ns
2
Clock High Time
Thigh
Measure from > 2.0V
9.3750
11.4580
ns
2
Output High Voltage
VOH
IOH = -1 mA
2.4
V
1
Output Low Voltage
VOL
Output High Current
IOH
Output Low Current
IOL
IOL = 1 mA
0.55
V OH @MIN = 1.0 V
-33
VOH@MAX = 3.135 V
VOL @ MIN = 1.95 V
-33
30
VOL @ MAX = 0.4 V
V
1
mA
1
mA
1
mA
1
38
mA
1
Rise Time
tr_USB
VOL = 0.4 V, VOH = 2.4 V
0.5
1.5
ns
1
Fall Time
tf_USB
VOH = 2.4 V, VOL = 0.4 V
0.5
1.5
ns
1
Duty Cycle
dt1
VT = 1.5 V
45
55
%
1
Group Skew
tskew
VT = 1.5 V
100
ps
1
Jitter, Cycle to cycle
tjcyc-cyc
VT = 1.5 V
130
ps
1,2
MAX
UNITS
Notes
*TA = 0 - 70°C; Supply Voltage VDD = 3.3 V +/-5%, CL = 5 pF with Rs = 22Ω (unless otherwise specified)
1
Guaranteed by design and characterization, not 100% tested in production.
2
ICS recommended and/or chipset vendor layout guidelines must be followed to meet this specification
Electrical Characteristics - REF-14.318MHz
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
Long Accuracy
ppm
see Tperiod min-max values
-100
100
ppm
1,2
Clock period
Tperiod
14.318MHz output nominal
69.8270
69.8550
ns
2
Clock Low Time
Tlow
Measure from < 0.6V
30.9290
37.9130
ns
2
Clock High Time
Thigh
Measure from > 2.0V
30.9290
37.9130
ns
2
Output High Voltage
VOH
IOH = -1 mA
2.4
V
1
Output Low Voltage
VOL
0.4
V
1
-29
-23
mA
1
29
27
mA
1
1.5
ns
1
IOL = 1 mA
VOH @MIN = 1.0 V,
Output High Current
IOH
Output Low Current
IOL
Rise Time
tr1
VOL = 0.4 V, VOH = 2.4 V
Fall Time
tf1
VOH = 2.4 V, VOL = 0.4 V
1.5
ns
1
Skew
tsk1
VT = 1.5 V
100
ps
1
Duty Cycle
dt1
VT = 1.5 V
Jitter
tjcyc-cyc
VT = 1.5 V
VOH@MAX = 3.135 V
VOL @MIN = 1.95 V,
VOL @MAX = 0.4 V
44
53
56
%
1
200
300
ps
1
*TA = 0 - 70°C; Supply Voltage VDD = 3.3 V +/-5%, CL = 5 pF with Rs = 22Ω (unless otherwise specified)
1
Guaranteed by design and characterization, not 100% tested in production.
2
All Long Term Accuracy and Clock Period specifications are guaranteed assuming that REFOUT is at 14.31818MHz
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
18
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
RESET_IN# - Assertion (transition from '1' to '0')
Asserting RESET_IN pin stops all the outputs including CPU, SRC, ATIG, PCI and USB with the REF[2:0] running.
The pin is a Schmitt trigger input with debouncing. After it is triggered, REF clocks will wait for two clock cycle to
ensure the RESET_IN is asserted. Then, it will take 3uS for the clocks to stop without glitches. The clock chip will
be power down and re-power up, and SMBus will be reloaded. It will take no more than 2.5mS for the clocks to come
out with correct frequencies and no glitches.
** Deassertion of RESET_IN# (transition from '0' to '1') has NO effect on the clocks.
2 clock
cycles
2.5mS max
3 uS max
RESET_IN#
REF [2:0]
*CLKS
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
19
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
SRC Routing Information
SRC Reference Clock
Common Recommendations for Differential Routing
Dimension or Value
L1 length, Route as non-coupled 50 ohm trace.
0.5 max
L2 length, Route as non-coupled 50 ohm trace.
0.2 max
L3 length, Route as non-coupled 50 ohm trace.
0.2 max
Rs
33
Rt
49.9
Unit
inch
inch
inch
ohm
ohm
Figure
2, 3
2, 3
2, 3
2, 3
2, 3
Down Device Differential Routing
L4 length, Route as coupled microstrip 100 ohm
differential trace.
L4 length, Route as coupled stripline 100 ohm
differential trace.
Dimension or Value
2 min to 16 max
Unit
inch
2
1.8 min to 14.4 max
inch
2
Differential Routing to PCI Express Connector
L4 length, Route as coupled microstrip 100 ohm
differential trace.
L4 length, Route as coupled stripline 100 ohm
differential trace.
Dimension or Value
0.25 to 14 max
Unit
inch
3
0.225 min to 12.6
max
inch
3
L1
Figure
L2
L4
Rs
L1’
L4’
L2’
Rs
Fig.1
Figure
Rt
HSCL Output
Buffer
Rt
L3’
L1
PCI Ex
REF_CLK
Test Load
L3
L2
L4
Rs
L1’
Fig.2
L4’
L2’
Rs
Rt
HSCL Output
Buffer
L3’
L1
Rt
PCI Ex Board
Down Device
REF_CLK Input
L3
L2
L4
Rs
L4’
L1’
L2’
Rs
Fig.3
HSCL Output
Buffer
Rt
L3’
Rt
L3
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
20
PCI Ex
Add In Board
REF_CLK Input
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
Shared Pin Operation Input/Output Pins
The I/O pins designated by (input/output) on the ICS951464
serve as dual signal functions to the device. During initial
power-up, they act as input pins. The logic level (voltage) that
is present on these pins at this time is read and stored into a
5-bit internal data latch. At the end of Power-On reset, (see
AC characteristics for timing values), the device changes the
mode of operations for these pins to an output function. In this
mode the pins produce the specified buffered clocks to
external loads.
the pin will be pulled high. With the jumper in place the pin
will be pulled low. If programmability is not necessary, than
only a single resistor is necessary. The programming resistors
should be located close to the series termination resistor to
minimize the current loop area. It is more important to locate
the series termination resistor close to the driver than the
programming resistor.
To program (load) the internal configuration register for these
pins, a resistor is connected to either the VDD (logic 1) power
supply or the GND (logic 0) voltage potential. A 10 Kilohm
(10K) resistor is used to provide both the solid CMOS
programming voltage needed during the power-up
programming period and to provide an insignificant load on
the output clock during the subsequent operating period.
Figure 1 shows a means of implementing this function when
a switch or 2 pin header is used. With no jumper is installed
Via to
VDD
Programming
Header
2K W
Via to Gnd
Device
Pad
8.2K W
Clock trace to load
Series Term. Res.
Fig. 1
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
21
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
56-Lead, 300 mil Body, 25 mil, SSOP
SYMBOL
A
A1
b
c
D
E
E1
e
h
L
N
a
In Millimeters
COMMON DIMENSIONS
MIN
MAX
2.41
2.80
0.20
0.40
0.20
0.34
0.13
0.25
SEE VARIATIONS
10.03
10.68
7.40
7.60
0.635 BASIC
0.38
0.64
0.50
1.02
SEE VARIATIONS
0°
8°
In Inches
COMMON DIMENSIONS
MIN
MAX
.095
.110
.008
.016
.008
.0135
.005
.010
SEE VARIATIONS
.395
.420
.291
.299
0.025 BASIC
.015
.025
.020
.040
SEE VARIATIONS
0°
8°
VARIATIONS
N
56
D mm.
MIN
18.31
D (inch)
MAX
18.55
MIN
.720
MAX
.730
Reference Doc.: JEDEC Publication 95, MO-118
10-0034
Ordering Information
951464yFLFT
Example:
XXXX y F LF T
Designation for tape and reel packaging
Lead Free, RoHS Compliant
Package Type
F = SSOP
Revision Designator (will not correlate with datasheet revision)
Device Type (consists of 3 to 7 digit numbers)
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
22
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
c
N
56-Lead 6.10 mm. Body, 0.50 mm. Pitch TSSOP
(240 mil)
(20 mil)
In Millimeters
In Inches
SYMBOL COMMON DIMENSIONS COMMON DIMENSIONS
MIN
MAX
MIN
MAX
A
-1.20
-.047
A1
0.05
0.15
.002
.006
A2
0.80
1.05
.032
.041
b
0.17
0.27
.007
.011
c
0.09
0.20
.0035
.008
D
SEE VARIATIONS
SEE VARIATIONS
E
8.10 BASIC
0.319 BASIC
E1
6.00
6.20
.236
.244
e
0.50 BASIC
0.020 BASIC
L
0.45
0.75
.018
.030
N
SEE VARIATIONS
SEE VARIATIONS
a
0°
8°
0°
8°
aaa
-0.10
-.004
L
E1
INDEX
AREA
E
1 2
a
D
A
A2
A1
-Ce
b
VARIATIONS
SEATING
PLANE
N
aaa C
56
D mm.
MIN
MAX
13.90
14.10
D (inch)
MIN
.547
MAX
.555
Reference Doc.: JEDEC Publication 95, M O-153
10-0039
Ordering Information
951464yGLFT
Example:
XXXX y G LF T
Designation for tape and reel packaging
Lead Free, RoHS Compliant
Package Type
G = TSSOP
Revision Designator (will not correlate with datasheet revision)
Device Type (consists of 3 to 7 digit numbers)
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8TM - based Systems
23
1211B—09/17/09
ICS951464
IDTTM/ICSTM Programmable System Clock Chip for ATI RS/RD690 K8 TM - based Systems
Revision History
Rev.
A
B
Issue Date Description
4/9/2008 Going to Release.
9/17/2009 Updated Power Group table.
Page #
4
Innovate with IDT and accelerate your future networks. Contact:
www.IDT.com
TM
For Sales
For Tech Support
800-345-7015
408-284-8200
Fax: 408-284-2775
408-284-6578
[email protected]
Corporate Headquarters
Asia Pacific and Japan
Europe
Integrated Device Technology, Inc.
6024 Silver Creek Valley Road
San Jose, CA 95138
United States
800 345 7015
+408 284 8200 (outside U.S.)
Integrated Device Technology
Singapore (1997) Pte. Ltd.
Reg. No. 199707558G
435 Orchard Road
#20-03 Wisma Atria
Singapore 238877
+65 6 887 5505
IDT Europe, Limited
Prime House
Barnett Wood Lane
Leatherhead, Surrey
United Kingdom KT22 7DE
+44 1372 363 339
© 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated
Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks
or registered trademarks used to identify products or services of their respective owners.
Printed in USA
24