1307043 SSMT™ Interconnect System Microminiature Surface Mount RF Connectors • • • • • 3.0 mm mated height Excellent interface retention Flexible micro-coax cable 360 degree mated rotation Tape and Reel packaging M/A-COM’s next generation SSMT™ surface mount Interconnect System is designed to provide superior electrical and mechanical performance for wireless communication applications. The SSMT™ occupies less printed circuit board (PCB) real estate than conventional through hole coaxial connectors. An innovative microstrip mounting pattern and plug receptacle design ensure reliable grounding and PCB retention characteristics. The SSMT™ Interconnect System allows closer pitch/spacing, standing a mere 3.0 mm (fully mated height) off the board. The mated SSMT™ interface allows 360 degrees of rotation providing maximum PCB design flexibility. The SSMT™ interface has been designed to provide optimal retention for applications where shock, vibration or cable flexure may be encountered. Force to disengage by cable load (cam-out) exceeds 300 grams. These next generation enhancements and features have been built into the SSMT™ design to provide the performance of much larger industry standard connectors. The SSMT™ Interconnect System consistently achieves broad band electrical performance through 6 GHz with a maximum VSWR of 1.20:1 at 2 GHz. This broad band performance establishes a reliable interface that can be utilized for future system upgrades without concern for performance degradation. The SSMT™ utilizes a common OSMT plug receptacle, part number 2367-0000-54, which is designed for high volume assembly using surface mount technology and is available in tape and reel packaging for automatic pick and place board assembly. The mating cable jack is available terminated to a highly flexible micro-coax cable as either a pigtail, jumper or standard interseries connector assembly to meet your needs. The SSMT™ Interconnect System can be manually mated, facilitating high volume assembly and eliminating the need for special engagement tooling. The SSMT™ interface design aligns the center contacts prior to full mating to ensure a robust mechanical engagement. Interface durability is rated at 100 mating cycles. 4.5 REF .177 4.0 REF .157 360° ROTATION MATED HEIGHT 3.0 REF .120 MINIMUM CLEARANCE FOR DISENGAGEMENT 6.6 REF .258 5.3 REF .208 4.4 REF .172 SSMT™JACK 1.3 DIA REF .052 (CABLE) SMT PLUG Note: Unless otherwise specified, all dimensions are mm/in M/A-COM’s SSMT™ Interconnect System is ideal for wireless surface mount applications in cellular basestations, handsets, personal communications systems (PCS), global positioning systems (GPS), wireless local loops (WLL), wireless LAN (WLAN) and paging. The SSMT™ provides versatile, high quality RF solutions for next generation interconnect needs. M/A-COM is an ISO 9001 certified manufacturer and maintains a SPC controlled manufacturing environment. Call your local Sales or authorized Distribution office for additional information or qualification samples. V4.00 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. Specifications Requirement Detail General Materials SMT Plug SSMT™ Cable Jack Finish Housing: Contacts: Polyphenylene Sulfide Copper Alloy Outer Contact: Inner Contact: Dielectric: Beryllium Copper Beryllium Copper Polypropylene, GF Plug and cable jack - Contacts: Gold plate over nickel plate Electrical Frequency dc - 6 GHz Nominal Impedance 50 Ohms Voltage Rating 250 Volts (VRMS Maximum) @ Sea Level VSWR (Mated Pair) 1.20:1 Maximum @ 2 GHz 1.40:1 Maximum @ 6 GHz Insulation Resistance 5000 Megohms Minimum Dielectric Withstanding Voltage 500 Volts (VRMS Minimum) @ Sea Level Contact Resistance (Connectors Only) Center Contact Outer Contact Insertion Loss (Connectors Only) 15 milliohms Maximum 10 milliohms Maximum .15dB Max. @ 6 GHz Mechanical Connector Durability Tape/Reel Packaging (Plug) Force to Engage Force to Disengage Force to Disengage by Cable Load (camout) 100 mating cycles 12mm per EIA-481 5.5 lbs. Max. (3.5 lbs. typ.) (2.0 lbs. typ.) 4.0 lbs. Max. (2.0 lbs. typ.) 300 Grams Min. (800 Grams typ. initial mate) Environmental Temperature Rating (Mated Pair) Resistance to Solder Heat -40°C (-40°F) to +125°C (257°F) Infrared, convection and vapor phase solderable (plug only). Maximum reflow time/temperature not to exceed 260°C for 3 minutes. Cable Specifications Materials Jacket: Shield: Dielectric: Center Conductor: FEP (polytetraflouroethylene) Silver plated copperwire, 44 AWG, 90% min. coverage PTFE (polytetraflouroethylene) Silver plated copper clad steel, 30 AWG Minimum Bend Radius 6.35mm (.250 inch) Insertion Loss (Cable Only) 0.5 dB/ft., 2.0 dB/m @ 1 GHz 0.9 dB/ft., 3.0 dB/m @ 2 GHz Center Conductor Resistance .25 Ohms per foot average. 819 milliohm/ meter Nom.; 250 milliohm/ Ft. Nom. 1.3 DIA REF .052 OUTER JACKET 1.0 DIA REF .040 SHIELD (BRAID) 0.8 DIA REF .030 DIELECTRIC 0.3 DIA REF .010 CENTER CONDUCTOR V4.00 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. Surface Mount Coaxial Connectors Straight SMT PCB Mount Plug Receptacle .020 4.5 .177 GROUND TERMINAL (3 PLCS) CENTER CONTACT (PIN) 5.0 .197 4.0 .157 2.1 .081 1.24 .049 4.5 .177 0.4 1.0 .015 .039 4 PLACES CENTER CONTACT TERMINAL OUTER CONTACT 0.5 .020 4 PLACES 0.6 .025 3.0 .118 CENTER CONTACT TERMINAL Part Number Packaging Quantity Multiple of 100 2367-0000-54 Bulk 2367-5001-54 178mm (7.0 inches) Dia. Taping 800 pcs/reel 2367-5002-54 330mm (13.3 inches) Dia. Taping 3000 pcs/reel Recommended Mounting Pattern for Microstrip Line 5.3 .207 1.2 .047 0.5 VIA HOLES .020 3 PLCS 9.0 .354 7.0 .274 6.0 .236 2.9 .113 (SEE NOTE 2) 0.6 .024 1.2 .047 1.2 .047 1.6 .064 (SEE NOTE 2) Notes: 1. Printed wiring board material: glass epoxy. FR-4 or similar, relative permittivity: 4.8, 1 oz. copper clad both sides. 2. These dimensions valid for 1.6 (.062) board thickness. 3.0 .118 0.5 .019 3.3 .128 1.2 .047 3.3 .128 1 OZ COPPER .0014 AREA FREE OF SOLDER MASK Right Angle Jack to Jack Cable Assembly Part Number 9960-1100-24 9960-1200-24 9960-1305-24 3.4 REF .132 5.3 REF .208 LENGTH "A" CENTERLINE TO CENTERLINE 2.1 REF .081 SSMT™ JACK 1.3 REF .052 CABLE 2.5 DIA .100 REF 1. Consult factory for non-standard cable lengths. Length ‘A’ Tolerances. Length ‘A’ mm (IN) Tolerance mm (IN) 50 To 100 (3.94) ± 3 (± .12) 101 To 500 (3.98 to 19.69) ± 5 (± .20) Over 500 (19.69) ± 10 (± .39) 2. Connector centerlines align ±30° as shown for lengths of 165mm (6.5 in.) or less. Cable assemblies over 165mm (6.5 in.) have randomly aligned connectors. 3. SSMT™ Jack is not mateable with OSMT High Retention plug receptacle (2367-5006-54) Note: Unless otherwise specified, all dimensions are mm/in M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. Cable Length1 mm (Inches) 100 4 200 8 305 12 V4.00 Surface Mount Coaxial Connectors Right Angle Jack Cable Pigtail Part Number Cable Length1 mm (Inches) 9960-2100-24 9960-2200-24 9960-2305-24 9960-2510-24 3.4 REF .132 LENGTH "A" CENTERLINE TO CABLE END 5.3 REF .208 2.1 REF .081 2.5 DIA .100 REF 1.3 REF .052 CABLE SSMT™JACK 100 200 305 510 (4) (8) (12) (20) 1. Consult factory for non-standard cable lengths. Cable length tolerance: Length ‘A’ Tolerances. Length ‘A’ mm (IN) Tolerance mm (IN) 50 To 100 (3.94) ± 3 (± .12) 101 To 500 (3.98 to 19.69) ± 5 (± .20) Over 500 (19.69) ± 10 (± .39) 2. SSMT™ Jack is not mateable with OSMT High Retention Plug receptacle (2367-5006-54). Note: To avoid damaging the cable, minimize time at temperature while soldering and/or applying heat to unterminated end of cable. Inter-Series Cable Assemblies Part Number 9960-4100-XX 9960-4200-XX 9960-4305-XX Housing Finish: SMA, Passivated stainless steel; SMB and D-sub coax, Gold Plate; OSX, Nickel plate. SMA Straight Plug Cable Length2 mm (Inches) 100 (4) 200 (8) 305 (12) 1. To order, replace XX in part number with appropriate dash numbers from tables below indicating connector choice. 2. Consult factory for non-standard cable lengths: Length ‘A’ Tolerances. Length ‘A’ mm (IN) Tolerance mm (IN) 50 To 100 (3.94) ± 3 (± .12) 101 To 500 (3.98 to 19.69) ± 5 (± .20) Over 500 (19.69) ± 10 (± .39) 3. Connectors are randomly aligned unless otherwise noted below. 4. SSMT™ Jack is not mateable with OSMT High Retention Plug receptacle (2367-5006-54). Dash Number -01 3.4 REF .132 LENGTH "A" REFERENCE PLANE TO CENTERLINE 19.2 REF 1.3 DIA REF .757 .052 CABLE 2.1 REF .081 SSMT™ RIGHT ANGLE JACK SMA STRAIGHT PLUG 2.5 DIA REF .100 V4.00 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. Surface Mount Coaxial Connectors SMA Bulkhead Jack LENGTH "A" REFREENCE PLANE TO CENTERLINE 21.3 REF .839 1.3 DIA REF .052 CABLE 7.9 HEX .312 2.1 REF .081 2.5 DIA REF .100 3.2 MAX THICKNESS .125 PANEL Dash Number -02 3.4 REF .132 6.4 DIA MIN .250 6.0 MIN .235 RECOMMENDED MOUNTING HOLE SSMT™ RIGHT ANGLE JACK SMA BULKHEAD JACK SMB Straight Plug Dash Number -03 LENGTH "A" REFERENCE PLANE TO CENTERLINE 21.9 REF 1.3 DIA REF .862 .052 CABLE 3.4 REF .132 2.1 REF .081 SSMT™ RIGHT ANGLE JACK 2.5 DIA REF .100 SMB Bulkhead Jack LENGTH "A" REFERENCE PLANE TO CENTERLINE 17.1 REF .675 7.4 1.3 DIA REF .290 .052 CABLE Dash Number -04 3.4 REF .132 2.1 REF .081 4.9 DIA MIN .192 6.4 HEX .250 2.4 MAX PANEL THICKNESS .093 2.5 DIA REF 7.9 HEX .100 .312 SSMT™ RIGHT ANGLE JACK 4.4 MIN .172 RECOMMENDED MOUNTING HOLE SMB Right Angle Plug Dash Number -05 LENGTH "A" CENTERLINE TO CENTERLINE 12.7 REF 1.3 .500 DIA REF .052 CABLE 3.4 REF .132 2.1 REF .081 SSMT™ RIGHT ANGLE JACK 14.0 .550 10.8 .427 2.5 DIA REF .100 SMB RIGHT ANGLE PLUG Note: Unless otherwise specified, all dimensions are mm/in M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. V4.00 Surface Mount Coaxial Connectors OSX Straight Plug Dash Number -06 LENGTH "A" REFERENCE PLANE TO CENTERLINE 20.9 REF 1.3 .822 DIA REF .052 CABLE 3.4 REF .132 2.1 REF .081 SSMT™ RIGHT ANGLE JACK 2.5 DIA REF .100 OSX STRAIGHT PLUG OSX Bulkhead Jack LENGTH "A" REFERENCE PLANE TO CENTERLINE 16.8 REF 1.3 .662 DIA REF .052 CABLE 3.4 REF .132 2.1 REF .081 4.8 DIA .189 4.9 DIA .192 MIN MAX PANEL 6.4 THICKNESS .250 6.4 HEX .250 11.4 .447 2.5 DIA REF .100 4.5 MIN .177 SSMT™RIGHT ANGLE JACK RECOMMENDED MOUNTING HOLE OSX BULKHEAD JACK OSX Right Angle Plug Dash Number -08 LENGTH "A" CENTERLINE TO CENTERLINE 10.8 REF 1.3 DIA REF .425 .052 CABLE 7.9 .312 Dash Number -07 3.4 REF .132 2.1 REF .081 SSMT™ RIGHT ANGLE JACK 6.1 .241 2.5 DIA REF .100 OSX RIGHT ANGLE PLUG Note: Unless otherwise specified, all dimensions are mm/in V4.00 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. Surface Mount Coaxial Connectors, Tools and Adapters 50 OHM D-Sub Coaxial Receptacle LENGTH "A" REFERENCE PLANE TO CENTERLINE 31.8 REF 1.250 1.3 DIA REF .052 CABLE 50 OHM D-SUB COAXIAL RECEPTACLE 2.5 DIA REF .100 Dash Number -09 3.4 REF .132 2.1 REF .081 SSMT™RIGHT ANGLE JACK SSMT Disengagement Tool Part Number 101.6 REF 4.00 2598-5400-54 See Application Notes for instructions SMT to SMA Between Series Adapters SMT Plug to SMA Jack Adapter SMT Plug to SMA Plug Adapter 5.5 (.218) ACROSS FLATS OSM (SMA) JACK SSMT SMT PLUG PLUG 13.7 (.538) REF. OSM (SMA) PLUG SMT SSMT PLUG PLUG 10.5 (.413) REF. Part Number 2382-2240-00 Part Number SMT Jack to SMA Jack Adapter SMT Jack to SMA Plug 5.5 (.218) ACROSS FLATS OSM (SMA) JACK SMT SSMT JACK 2381-2241-00 16.2 (.639) REF. OSM (SMA) PLUG SSMT™ JACK 12.9 (.508) REF. Part Number 2380-2240-00 Part Number 2382-2241-00 Note: Unless otherwise specified, all dimensions are mm/in M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. V4.00 Application Notes Packaging ■ Bulk Packed or Packaged in Plastic Carrier Tape on a Reel Available on 178mm/800 pc or 300mm/3000 pc Plastic Reel Sealed Plastic Carrier Tape in Accordance with EIA-481-1 Conductive Anti-static Tape Material To Prevent Static Charge Entry to Electronic Assembly or Equipment Recommended Max. Storage Temperature of Plastic Carrier Tape: 40°C (140°F), 50% Relative Humidity Max. ■ ■ ■ ■ 4.00 (.157) 8.00 .157 CENTER CONTACT TERMINAL REF. 1.50 DIA. .059 2.00 .157 1.75 .157 0.40 MAX .016 5.50 .157 12.0 .472 COVER TAPE REF. (.01 MAX. THK.) SMT PLUG 2367-0000-54 7.39 .290 REF 3.00 MAX .118 REF. EMBOSSED CARRIER TAPE REF. Figure 1 SMT Surface Mount Plug Receptacle Tape Package Detail Dimensions and Orientation Automatic Placement The SMT surface mount plug receptacle is compatible with industry standard automatic placement equipment utilizing pneumatic (vacuum) part pick-up. SMT plug surface mount receptacles have been approved for use with Fuji pick and place equipment. A standard 1.8 or 2.5 mm dia. pneumatic vacuum nozzel is recommended for internal pick-up. Vacuum nozzel configuration may vary depending on equipment utilized. Typical configurations follow: 2.0 .080 DIA. 2.0 .080 DIA. 1.0 REF I.D. .039 2.0 DIA. .080 4.0 .158 4.5 .177 4.0 .158 DIA. 4.0 DIA. .158 1.8 OR 2.5 O.D. .070 .098 SMT PLUG REF External Pickup Internal Pickup Figure 2 Typical Pneumatic Nozzel Nozzel vacuum should be 15-30 inch Hg. Component placement pressure should not exceed 400g. Note: Unless otherwise specified, all dimensions are mm/in M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. V4.00 Application Notes Cable Stripping To ensure optimal performance for pigtail soldering applications, it is critical that proper care be exercised in the cable stripping operation. M/A-COM has prepared a detailed application note to facilitate proper stripping of the SSMT™ Micro-coax cable. This application note outlines proper procedures and calibration techniques for recommended Schleuniger brand automatic stripping equipment. Application note ID 1015 entitled, “Cable Stripping Process for SSMT™ Surface Mount Connector Series” is available from a local M/A-COM field office, authorized distributor or direct through our global applications engineering group. Soldering SMT plug receptacles are designed for reflow soldering processes, however excellent results can still be achieved using manual soldering. Flow (wave) soldering is not appropriate for this device. The type of solder paste selected for reflow soldering is generally a function of many factors relative to the overall system (PWA*) design. Most applications will use common electronic grade solders such as: 63/37, 60/40 or 62/36/2 with mild rosin/resin fluxes. Metal content of the paste for screen and/or stencil applications is generally 85-90% by weight, slightly lower for nozzel dispensing applications. When screening or stenciling, solder paste thickness of .15mm (.006 inch) to .25mm (.010 inch) is recommended. TEMP °C REFLOW 20 - 40 SEC AT 235°C TYP. 240 - 250°C MAX 250 200 150 100 50 PREHEAT SOLDER FLUX MELT/ACTIVATION PASTE SOLDER SPHERE MELT BEGINS CURE 60 - 90 SEC AT 100 - 200°C 30-60 SEC 50-100°C AMBIENT OR FORCED COOL DOWN Figure 4 Typical Infrared and Convection Heating/Soldering Profile * Printed Wiring Assembly Note: Unless otherwise specified, all dimensions are mm/in M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. V4.00 Application Notes Soldering cont’d. TEMP °C 250 REFLOW 20 - 90 SEC AT 215°C 200 150 100 50 10 - 30 MIN AT 80 - 130°C PREHEAT 30 - 180 SEC AT 110 - 150°C AMBIENT OR FORCED COOL DOWN Figure 5 Typical Vapor Phase Heating/Soldering Profile A 15-40 watt max. fine point tip soldering iron is recommended for manual soldering. Soldering iron tip temperature should not exceed 350-370°C. Lengthy application of heat and/or direct contact of the iron tip with the plastic housing should be avoided. The flux core solder (i.e.; 63/37 RMA, 62/36/2 RMA) is recommended. The center contact pad reflows easiest because of relatively low thermal mass, therefore, the center contact lead should be soldered first to minimize connector ”skating“. Post-Solder Cleaning SMT plug receptacles can withstand most electronics grade cleaning agents including: high temperature water/aqueous cleaners, ethanol, methanol, MEK, acetone, 1,1,1-tricloroethane, trichlordethylene, perchloroethylene, chloroflorocarbon (CFC) solvents, isopropanol, dichlorofluoroethane, and blends. The SSMT cable can also withstand mild exposure to the above listed cleaning agents. Disengagement Tool Part Number: 2598-5400-54 SLIDE HORIZONTAL TO ENGAGE TOOL LIFT VERTICAL TO DISENGAGE CONNECTOR PRESS VERTICAL TO ENGAGE CONNECTOR OPTIONAL Figure 6 Use of Engagement/Disengagement Tool (2598-5400-54) Note: The SSMT™ disengagement tool can be utilized as an optional engagement tool versus manual hand installation. Note: Unless otherwise specified, all dimensions are mm/in M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. V4.00 Sales Offices / Representatives AMERICAS Tel: 800-366-2266 Fax: 800-618-8883 (Route to Local Offices) Argentina 54.1.300.2013 Chicago 800.366.2266 Los Angeles 800.366.2266 San Jose 800.366.2266 Atlanta 800.366.2266 Dallas 800.366.2266 New York, Metro 800.366.2266 Seattle 800.366.2266 Baltimore 800.366.2266 Dayton 800.366.2266 Orange County 800.366.2266 St. Louis 800.366.2266 Boston 800.366.2266 Denver 800.366.2266 Philadelphia 800.366.2266 Brazil 55.11.5188.4000 Florida 800.366.2266 Phoenix 800.366.2266 Canada 800.366.2266 Fort Wayne 800.366.2266 Raleigh/Durham 800.366.2266 Cedar Rapids 800.366.2266 Kansas City 800.366.2266 San Diego 800.366.2266 EUROPE/MIDDLE EAST/AFRICA Finland 358.95123.4237 France 33.1.3465.3737 Germany 49.89.462.3410 Hungary Tavkozlest Innovations Co. 36.1.251.0888 ASIA/PACIFIC Tel: 44.1344.869.595 Fax: 44.1344.300.020 (European Headquarters) Israel M/A-COM ISCOM LTD. 972.3.7518421 Poland Micro Active Components SC 48.22.659.6174 Turkey ELEKTRO Sanayi Ve Ticaret AS 90.216.4610700 Italy (Milan) 39.2.6696368 South Africa DS Communications cc 27.11.805.1878 United Kingdom M/A-COM European Hdq 44.1344.869.595 Italy (Rome) 39.6.4191955 Netherlands Hi-Tech Electronic Components BV. 31.346566024 Sweden 468.580.83385 Tel: 85.2.2111.8088 Fax: 85.2.2111.8087 (Asia Pacific Headquarters) Hong Kong MA/-COM Asia Pacific Hdq 85.2.2111.8088 China Wellink Communications 852.2884.4128 Japan (Tokyo) NIHON M/A-COM, K.K. 81.3.3263.8761 Singapore Avnet GTDG 65.243.3266 Hong Kong Gentech Industries, Ltd. 852.2521.4567 Shanghai PRC Shanghai Well Genius 86.21.6438.1888 Korea Hanaro Corporation 82.2.516.1144 Taiwan Evergo Corporation 886.2.715.0283 India RADELCOM 91.80.558.5999 Japan (Osaka) NIHON M/A-COM, K.K. 81.6.423.4351 New Zealand (AMP) 64.9.6344580 Many M/A-COM products are available through distribution. For a complete, worldwide list of M/A-COM distributors by return fax, call our FaxFacts System from your fax machine at 978.442.4222 and request document 4, or visit our Website at www.macom.com. Printed in U.S. 5/98 North America Telephone: 1-800-366-2266 Fax: 1-800-618-8883 Central America Telephone: 602-949-1642 Fax: 602-941-1703 South America Telephone: 770-956-0351 Fax: 770-953-9056 Europe/Middle East/Africa Telephone: +44 (1344) 869 595 Fax: +44 (1344) 300 020 Asia/Pacific Telephone: +85 2 2111 8088 Fax: +85 2 2111 8087 www.macom.com