PC MAIN CLOCK - CK540 9UMS9001 Recommended Application: Features/Benefits: Calistoga Based Ultra-Mobile PC (UMPC) • Supports Dothan ULV CPUs with 100 and 133 MHz CPU outputs Output Features: • Dedicated TEST/SEL and TEST/MODE pins saves isolation resistors on pins • PCI_SRC and CPU STOP inputs for power manangment • Fully integrated Vreg • Integrated series resistors on differential outputs • Supports split rail operation for maximum power savings • Also runs from single 3.3V rail • 1.05V-3.3V support for differential VDDIO • 2 - CPU Low Power differential push-pull pairs • 1 - ITP low power differential push-pull pair • 4 - SRC low power differential push-pull pairs • 1 - LCD100 SSCD low power differential push-pull pair • 1 - DOT96 low power differential push-pull pair • 3 - PCI, 33MHz • 1 - USB, 48MHz • 1 - REF, 14.31818MHz FSLB CPU_STOP# CPUITPC_LPRS CPUITPT_LPRS CPU1C_LPRS CPU1T_LPRS VDDIO_CPU GNDCPU CPU0C_LPRS CPU0T_LPRS VDDCPUPLL_3.3 CK_PWRGD#/PD FSLC GNDREF Pin Configuration 56 55 54 53 52 51 50 49 48 47 46 45 44 43 X2 X1 VDDREFIO_3.3 REF0 1 2 3 4 SDATA 5 SCLK 6 TEST_SEL 7 TEST_MODE 8 PCI_STOP# 9 VDDIO_PCI3.3 10 PCI0 11 PCI1 12 PCI_F2 13 GNDPCI 14 ICS9UMS9001 42 41 40 39 38 CLKREQ2# CLKREQ3# VDDCORE_3.3 SRC3T_LPRS 37 36 35 34 33 32 31 30 29 SRC2T_LPRS SRC2C_LPRS VDDIO_SRC GNDSRC SRC1T_LPRS SRC1C_LPRS SRC0T_LPRS SRC0C_LPRS CKLREQ0# SRC3C_LPRS CLKREQ1# VDDLCDPLL_3.3 VDDIO_LCD LCD100T_LPRS LCD100C_LPRS GND GND DOT96T_LPRS VDDIO_96Mhz DOT96C_LPRS VDD48IO_3.3 VDD48PLL_3.3 USB_48MHz GND48 15 16 17 18 19 20 21 22 23 24 25 26 27 28 56-pin MLF ® IDT PC MAIN CLOCK - CK540 1247B—07/19/10 1 9UMS9001 PC MAIN CLOCK - CK540 Advance Information Pin Description PIN # PIN NAME TYPE DESCRIPTION 1 X2 OUT Crystal output, nominally 14.318MHz. 2 X1 3 VDDREFIO_3.3 PWR Power pin for the REF output and crystal oscillator. 3.3V nominal. 4 REF0 OUT 3.3V 14.318MHz reference clock 5 SDATA I/O Data pin for SMBus circuitry, 5V tolerant. 6 SCLK IN 7 TEST_SEL IN 8 TEST_MODE IN Clock pin of SMBus circuitry, 5V tolerant. 3.3V input that puts the part in test mode. This is a realtime input. See the Test Clarification Table for details. When Test mode is selected, this chooses either hi-Z or REF/N for the outputs. 9 PCI_STOP# IN 3.3V tolerant input that stops all PCI and SRC clocks, except those set to be free running. 10 VDDIO_PCI3.3 PWR 3.3V power supply for the PCI outputs 11 PCI0 OUT 3.3V PCI clock output. 12 PCI1 OUT 3.3V PCI clock output. 13 PCI_F2 OUT Free running 3.3V PCI clock output 14 GNDPCI PWR Ground for PCI output clocks. 15 GND48 PWR Ground for the USB clock. 16 USB_48MHz OUT 17 VDD48IO_3.3 PWR 3.3V Power supply for the 48MHz output IN Crystal input, Nominally 14.318MHz. Fixed 3.3V 48MHz USB clock output 18 VDD48PLL_3.3 PWR 3.3V Power supply for the 48/96MHz PLL 19 VDDIO_96Mhz 20 DOT96C_LPRS 21 DOT96T_LPRS 22 GND PWR Power supply for DOT96 output. VDD_IO = 1.05 to 3.3V +/-5%. Complement side of low-power CK505-type 96MHz differential clock. Rs is integrated (No external OUT series resistor required). True side of low-power CK505-type 96MHz differential clock. Rs is integrated (No external series OUT resistor required). PWR Ground for 96MHz output 23 GND PWR Ground for LCD 100 MHz output. 24 LCD100C_LPRS OUT 25 LCD100T_LPRS Complement side of low-power CK505-type LCD100MHz spreading differential clock. Rs is integrated (No external series resistor required). 26 VDDIO_LCD True side of low-power CK505-type LCD100MHz spreading differential clock. Rs is integrated (No external series resistor required). PWR Power supply for LCD100 output. VDD_IO = 1.05 to 3.3V +/-5%. 27 VDDLCDPLL_3.3 PWR 3.3V Power supply for the LCD100 Spreading PLL 28 CLKREQ1# OUT IN Clock request input for SRC output pair 1. See the SRC, LCD, DOT Power Management Table for details IDT® PC MAIN CLOCK - CK540 1247B—07/19/10 2 9UMS9001 PC MAIN CLOCK - CK540 Advance Information Pin Description (continued) PIN # PIN NAME TYPE 29 CKLREQ0# 30 SRC0C_LPRS OUT 31 SRC0T_LPRS OUT 32 SRC1C_LPRS OUT 33 SRC1T_LPRS OUT 34 GNDSRC PWR 35 VDDIO_SRC 36 SRC2C_LPRS 37 SRC2T_LPRS 38 SRC3C_LPRS 39 SRC3T_LPRS 40 VDDCORE_3.3 41 CLKREQ3# 42 CLKREQ2# 43 FSLB 44 CPU_STOP# 45 CPUITPC_LPRS 46 CPUITPT_LPRS 47 CPU1C_LPRS 48 CPU1T_LPRS PWR Power supply for SRC outputs. VDD_IO = 1.05 to 3.3V +/-5%. Complement side of low-power CK505-type SRC2 differential clock. Rs is integrated (No external OUT series resistor required). True side of low-power CK505-type SRC2 differential clock. Rs is integrated (No external series OUT resistor required). Complement side of low-power CK505-type SRC3 differential clock. Rs is integrated (No external OUT series resistor required). True side of low-power CK505-type SRC3 differential clock. Rs is integrated (No external series OUT resistor required). PWR 3.3V Power supply for 3.3V core Clock request input for SRC output pair 2. See the SRC, LCD, DOT Power Management Table for IN details Clock request input for SRC output pair 2. See the SRC, LCD, DOT Power Management Table for IN details Low threshold Frequency Select input. See Table 1: CPU Frequency Select Table and the Vih_fs and IN Vil_fs specifications. IN Stops all CPU clocks except those set to be free running. Complement side of low-power CK505-type CPUITP differential clock. Rs is integrated (No external OUT series resistor required). Note that this pin is NOT muxed with an SRC output. True side of low-power CK505-type CPUITP differential clock. Rs is integrated (No external series OUT resistor required). Complement side of low-power CK505-type CPU1 differential clock. Rs is integrated (No external OUT series resistor required). Note that this pin is NOT muxed with an SRC output. True side of low-power CK505-type CPU1 differential clock. Rs is integrated (No external series OUT resistor required). PWR Power supply for CPU outputs. VDD_IO = 1.05 to 3.3V +/-5%. 49 VDDIO_CPU 50 GNDCPU 51 CPU0C_LPRS 52 CPU0T_LPRS 53 VDDCPUPLL_3.3 54 CK_PWRGD#/PD 55 FSLC 56 GNDREF IN DESCRIPTION Clock request input for SRC output pair 0. See the SRC, LCD, DOT Power Management Table for details Complement side of low-power CK505-type SRC0 differential clock. Rs is integrated (No external series resistor required). True side of low-power CK505-type SRC0 differential clock. Rs is integrated (No external series resistor required). Complement side of low-power CK505-type SRC1 differential clock. Rs is integrated (No external series resistor required). True side of low-power CK505-type SRC1 differential clock. Rs is integrated (No external series resistor required). Ground for SRC clocks PWR Ground Pin for CPU Outputs Complement side of low-power CK505-type CPU1 differential clock. Rs is integrated (No external OUT series resistor required). Note that this pin is NOT muxed with an SRC output. True side of low-power CK505-type CPU1 differential clock. Rs is integrated (No external series OUT resistor required). PWR 3.3V Power Supply for CPU PLL. Notifies 9UMS9001 to sample latched inputs or enter power down mode. 1 = Power down mode IN Falling Edge = Sample latched inputs 0 = Normal operation Low threshold Frequency Select input. See Table 1: CPU Frequency Select Table and the Vih_fs and IN Vil_fs specifications. PWR Ground pin for crystal oscillator circuit and REF output IDT® PC MAIN CLOCK - CK540 1247B—07/19/10 3 9UMS9001 PC MAIN CLOCK - CK540 Advance Information Functional Block Diagram REF X1 OSC X2 PCI CPU/SRC/ PC SS-PLL SRC(3:0) CPU(2:0) LCD SS PLL LCD Fixed EXACT 48MHz DOT96MHZ 48MHZ FSLC FSLB CKPWRGD#/PD PCI_STOP# CPU_STOP# CLKREQ(3:0)# Control Logic ITP_EN TESTSEL TESTMODE Power Groups VDD3.3V Pin Number VDDIO 1.05~3.3V 49 53 53 35 40 26 27 19 17, 18 3 10 Description GND 50 34 23 22 15 56 14 Low power outputs Analog Master Clock, Analog Low power outputs SRCCLK Analog Low power outputs LCDCLK PLL DOT 96Mhz Low power outputs USB 48 Xtal, REF PCICLK CPUCLK IDT® PC MAIN CLOCK - CK540 1247B—07/19/10 4 9UMS9001 PC MAIN CLOCK - CK540 Advance Information Table 1: CPU Frequency Select Table 1 FSLC B0b7 0 0 1 1 1 FSLB B0b6 0 1 0 1 CPU MHz SRC MHz 133.33 100.00 Reserved 100.00 100.00 200.00 PCI MHz REF MHz USB MHz DOT MHz 33.33 14.318 48.00 96.00 33.33 14.318 48.00 96.00 1. FSLC is a low-threshold input.Please see VIL_FS and VIH_FS specifications in the Input/Supply/Common Output Parameters Table for correct values. Also refer to the Test Clarification Table. Table 2: LCD Quick Configuration B1b3 B1b2 B1b1 B1b0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 Pin 24/25 MHz 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 Spread Comment % 0.25% Down Spread LCDCLK 0.5% Down Spread LCDCLK 1% Down Spread LCDCLK 1.25% Down Spread LCDCLK 1.5% Down Spread LCDCLK 2% Down Spread LCDCLK 2.5% Down Spread LCDCLK 3.0% Down Spread LCDCLK 0.25% Center Spread LCDCLK 0.5% Center Spread LCDCLK 1% Center Spread LCDCLK 1.25% Center Spread LCDCLK 1.5% Center Spread LCDCLK 2% Center Spread LCDCLK 2.5% Center Spread LCDCLK 3.0% Center Spread LCDCLK Table 3: IO_Vout select table B5b2 B5b1 B5b0 IO_Vout 0.3V 0 0 0 0.4V 0 0 1 0.5V 0 1 0 0.6V 0 1 1 0.7V 1 0 0 0.8V 1 0 1 0.9V 1 1 0 1.0V 1 1 1 IDT® PC MAIN CLOCK - CK540 1247B—07/19/10 5 9UMS9001 PC MAIN CLOCK - CK540 Advance Information Absolute Maximum Ratings PARAMETER SYMBOL CONDITIONS Maximum Supply Voltage VDDxxx_3.3 Supply Voltage MIN MAX 4.6 V 1,7 Maximum Supply Voltage VDDxxx_1.8 Supply Voltage 2.3 V 1,7 Maximum Supply Voltage VDDxxx_IO Low-Voltage Differential I/O Supply 3.8 V 1,7 Maximum Input Voltage VIH 3.3V LVCMOS Inputs 4.6 V 1,7,8 Minimum Input Voltage VIL Any Input GND - 0.5 Storage Temperature Ts - -65 Input ESD protection ESD prot Human Body Model 2000 150 UNITS Notes V 1,7 ° C 1,7 V 1,7 Electrical Characteristics - Input/Supply/Common Output Parameters PARAMETER SYMBOL CONDITIONS MIN MAX Ambient Operating Temp Tambient - 0 70 °C Supply Voltage VDDxxx_3.3 Supply Voltage 3.135 3.465 V 1 Supply Voltage VDDxxx_1.8 Supply Voltage 1.71 1.89 V 1 Supply Voltage VDDxxx_IO Low-Voltage Differential I/O Supply 1.05 3.465 V 1 Input High Voltage VIHSE Single-ended inputs 2 VDD + 0.3 V 1 Input Low Voltage VILSE Single-ended inputs VSS - 0.3 0.8 V 1 Input Leakage Current IIN -5 5 uA 1 Input Leakage Current IINRES VIN = VDD , VIN = GND Inputs with pull or pull down resistors VIN = VDD , VIN = GND -200 200 uA 1 Output High Voltage VOHSE Single-ended outputs, IOH = -1mA V 1 Output Low Voltage VOLSE Single-ended outputs, IOL = 1 mA Output High Voltage VOHDIF Differential Outputs VOLDIF Differential Outputs VIH_FS_TEST 3.3 V +/-5% VIH_FS VIL_FS Output Low Voltage Low Threshold InputHigh Voltage (Test Mode) Low Threshold InputHigh Voltage Low Threshold InputLow Voltage Operating Supply Current 2.4 UNITS Notes 1 0.4 V 1 0.9 V 1 0.4 V 1 2 VDD + 0.3 V 1 3.3 V +/-5% 0.7 1.5 V 1 3.3 V +/-5% VSS - 0.3 0.35 V 1 0.7 IDD_DEFAULT 3.3V supply, LCDPLL off 80 mA 1 IDD_LCDEN 100 mA 1 25 mA 1 IDD_PD3.3 3.3V supply, LCDPLL enabled 0.8V supply, Differential IO current, all outputs enabled 3.3V supply, Power Down Mode 1 mA 1 IDD_PDIO 0.8V IO supply, Power Down Mode 0.1 mA 1 Input Frequency Fi VDD = 3.3 V 15 MHz 2 Pin Inductance Lpin IDD_IO Power Down Current Input Capacitance Spread Spectrum Modulation Frequency 7 nH 1 5 pF 1 Output pin capacitance 6 pF 1 CINX X1 & X2 pins 7 pF 1 fSSMOD Triangular Modulation 33 kHz 1 CIN Logic Inputs COUT 1.5 IDT® PC MAIN CLOCK - CK540 30 1247B—07/19/10 6 9UMS9001 PC MAIN CLOCK - CK540 Advance Information AC Electrical Characteristics - Input/Common Parameters PARAMETER SYMBOL Clk Stabilization TSTAB Tdrive_SRC TDRSRC Tdrive_PD# TDRPD Tdrive_CPU TDRSRC Tfall_PD# TFALL Trise_PD# TRISE CONDITIONS From VDD Power-Up or deassertion of PD# to 1st clock SRC output enable after PCI_STOP# de-assertion Differential output enable after PD# de-assertion CPU output enable after CPU_STOP# de-assertion MIN MAX UNITS Notes 1.8 ms 1 15 ns 1 300 us 1 10 ns 1 5 ns 1 5 ns 1 Fall/rise time of PD#, PCI_STOP# and CPU_STOP# inputs AC Electrical Characteristics - Low Power Differential Outputs PARAMETER SYMBOL CONDITIONS MIN MAX Rising Edge Slew Rate tSLR Differential Measurement 1 4 UNITS NOTES V/ns 1,2 1 Falling Edge Slew Rate tFLR Differential Measurement 4 V/ns 1,2 Rise/Fall Time Variation tSLVAR Single-ended Measurement 125 ps 1 Maximum Output Voltage VHIGH Includes overshoot 1150 mV 1 Minimum Output Voltage VLOW Includes undershoot -300 mV 1 Differential Voltage Swing VSWING Differential Measurement 300 mV 1 Crossing Point Voltage VXABS Single-ended Measurement 300 550 mV 1,3,4 Crossing Point Variation VXABSVAR Single-ended Measurement 140 mV 1,3,5 Duty Cycle DCYC Differential Measurement 55 % 1 CPU Jitter - Cycle to Cycle CPUJ C2C Differential Measurement 85 ps 1 SRC Jitter - Cycle to Cycle SRCJ C2C Differential Measurement 125 ps 1 DOT Jitter - Cycle to Cycle DOTJ C2C Differential Measurement 250 ps 1 45 CPU[1:0] Skew CPUSKEW10 Differential Measurement 100 ps 1 CPU[2_ITP:0] Skew CPUSKEW20 Differential Measurement 150 ps 1 SRC[3:0] Skew SRCSKEW Differential Measurement 250 ps 1 Electrical Characteristics - PCICLK/PCICLK_F PARAMETER SYMBOL CONDITIONS MIN MAX Long Accuracy ppm see Tperiod min-max values -300 300 Clock period Tperiod Absolute min/max period Tabs 33.33MHz output nominal/spread 29.49100 Output High Voltage VOH IOH = -1 mA 2.4 Output Low Voltage VOL 33.33MHz output nominal 33.33MHz output spread 29.99100 30.00900 ns 6 30.15980 ns 6 30.65980 ns 6 V 1 IOL = 1 mA 0.4 V OH @MIN = 1.0 V Output High Current IOH Output Low Current IOL Rising Edge Slew Rate tSLR Measured from 0.8 to 2.0 V Falling Edge Slew Rate tFLR Measured from 2.0 to 0.8 V Duty Cycle dt1 VT = 1.5 V -33 VOH@MAX = 3.135 V VOL @ MIN = 1.95 V -33 30 Skew tskew VT = 1.5 V tdelay VT = 1.5 V Jitter, Cycle to cycle tjcyc-cyc VT = 1.5 V 1 1 mA 1 mA 1 mA 1 4 V/ns 1 1 4 V/ns 1 45 55 % 1 1 250 0 nominal 500 IDT® PC MAIN CLOCK - CK540 V mA 38 VOL @ MAX = 0.4 V Intentional PCI-PCI delay UNITS NOTES 1,6 ppm ps 1 ps 1,9 ps 1 1247B—07/19/10 7 9UMS9001 PC MAIN CLOCK - CK540 Advance Information Electrical Characteristics - USB48MHz PARAMETER Long Accuracy SYMBOL ppm CONDITIONS see Tperiod min-max values MIN -100 MAX 100 UNITS NOTES ppm 1,2 Clock period Tperiod 48.00MHz output nominal 20.83125 20.83542 ns 2 Absolute min/max period Tabs 48.00MHz output nominal 20.48130 21.18540 ns 2 Output High Voltage VOH IOH = -1 mA 2.4 V 1 Output Low Voltage VOL IOL = 1 mA V 1 mA 1 Output High Current Output Low Current IOH IOL 0.4 V OH @MIN = 1.0 V -29 VOH@MAX = 3.135 V VOL @ MIN = 1.95 V -23 mA 1 mA 1 27 mA 1 29 VOL @ MAX = 0.4 V Rising Edge Slew Rate tSLR Measured from 0.8 to 2.0 V 1 2 V/ns 1 Falling Edge Slew Rate tFLR Measured from 2.0 to 0.8 V 1 2 V/ns 1 Duty Cycle dt1 VT = 1.5 V 45 55 % 1 Jitter, Cycle to cycle tjcyc-cyc VT = 1.5 V 350 ps 1 Electrical Characteristics - SMBus Interface PARAMETER SYMBOL SMBus Voltage VDD CONDITIONS Low-level Output Voltage Current sinking at VOLSMB = 0.4 V SCLK/SDATA Clock/Data Rise Time SCLK/SDATA Clock/Data Fall Time Maximum SMBus Operating Frequency VOLSMB @ IPULLUP IPULLUP SMB Data Pin TFI2C (Max VIL - 0.15) to (Min VIH + 0.15) (Min VIH + 0.15) to (Max VIL - 0.15) FSMBUS Block Mode TRI2C IDT® PC MAIN CLOCK - CK540 MIN MAX 2.7 5.5 V 1 0.4 V 1 mA 1 1000 ns 1 300 ns 1 100 kHz 1 4 UNITS Notes 1247B—07/19/10 8 9UMS9001 PC MAIN CLOCK - CK540 Advance Information Electrical Characteristics - REF-14.318MHz PARAMETER SYMBOL CONDITIONS MIN MAX Long Accuracy ppm see Tperiod min-max values -300 300 ppm 1,2 Clock period Tperiod 14.318MHz output nominal 69.8203 69.8622 ns 2 Absolute min/max period Tabs 14.318MHz output nominal 69.8203 70.86224 ns 2 Output High Voltage VOH IOH = -1 mA 2.4 V 1 Output Low Voltage VOL 0.4 V 1 -33 -33 mA 1 30 38 mA 1 1 4 V/ns 1 IOL = 1 mA VOH @MIN = 1.0 V, UNITS Notes Output High Current IOH Output Low Current IOL Rising Edge Slew Rate tSLR Measured from 0.8 to 2.0 V Falling Edge Slew Rate tFLR Measured from 2.0 to 0.8 V 1 4 V/ns 1 Duty Cycle dt1 VT = 1.5 V 45 55 % 1 Jitter tjcyc-cyc VT = 1.5 V 1000 ps 1 VOH@MAX = 3.135 V VOL @MIN = 1.95 V, VOL @MAX = 0.4 V Notes on Electrical Characteristics: 1 Guaranteed by design and characterization, not 100% tested in production. 2 Slew rate measured through Vswing centered around differential zero 3 Vxabs is defined as the voltage where CLK = CLK# 4 Only applies to the differential rising edge (CLK rising and CLK# falling) Defined as the total variation of all crossing voltages of CLK rising and CLK# falling. Matching applies to rising edge rate of CLK and falling edge of CLK#. It is measured using a +/-75mV window centered on the average cross point where CLK meets CLK#. The average cross point is used to calculate the voltage thresholds the oscilloscope is to use for the edge rate calculations 6 All Long Term Accuracy and Clock Period specifications are guaranteed assuming that REFOUT is at 14.31818MHz 5 7 Operation under these conditions is neither implied, nor guaranteed. 8 Maximum input voltage is not to exceed maximum VDD 9 See PCI Clock-to-Clock Delay Figure IDT® PC MAIN CLOCK - CK540 1247B—07/19/10 9 9UMS9001 PC MAIN CLOCK - CK540 Advance Information General I2C serial interface information for the 9UMS9001 How to Write: How to Read: Controller (host) sends a start bit. Controller (host) sends the write address D2 (H) ICS clock will acknowledge Controller (host) sends the beginning byte location = N ICS clock will acknowledge Controller (host) sends the data byte count = X ICS clock will acknowledge Controller (host) starts sending Byte N through Byte N + X -1 (see Note 2) • ICS clock will acknowledge each byte one at a time • Controller (host) sends a Stop bit • • • • • • • • • • • • • • • • • • • • • • Controller (host) will send start bit. Controller (host) sends the write address D2 (H) ICS clock will acknowledge Controller (host) sends the begining byte location = N ICS clock will acknowledge Controller (host) will send a separate start bit. Controller (host) sends the read address D3 (H) ICS clock will acknowledge ICS clock will send the data byte count = X ICS clock sends Byte N + X -1 ICS clock sends Byte 0 through byte X (if X(H) was written to byte 8). Controller (host) will need to acknowledge each byte Controller (host) will send a not acknowledge bit Controller (host) will send a stop bit Index Block Read Operation Index Block Write Operation Controller (Host) starT bit T Slave Address D2(H) WR WRite Controller (Host) T starT bit Slave Address D2(H) WR WRite ICS (Slave/Receiver) ICS (Slave/Receiver) ACK ACK Beginning Byte = N Beginning Byte = N ACK ACK RT Repeat starT Slave Address D3(H) RD ReaD Data Byte Count = X ACK Beginning Byte N ACK X Byte ACK Data Byte Count = X ACK Beginning Byte N Byte N + X - 1 ACK X Byte ACK P stoP bit Byte N + X - 1 N P IDT® PC MAIN CLOCK - CK540 Not acknowledge stoP bit 1247B—07/19/10 10 9UMS9001 PC MAIN CLOCK - CK540 Advance Information Byte 0 FS Readback, SS Enable, STOP Control Register Bit 7 6 5 4 3 2 1 0 Pin - Name FSLC FSLB CPU_SS_EN LCD_Enable SRC3_STOP SRC2_STOP SRC1_STOP SRC0_STOP Description CPU Freq. Sel. Bit MSB CPU Freq. Sel. Bit LSB Spread spectrum enable for CPU/SRC/PCI outputs Turns On LCD PLL SRC 3 Stop Control SRC 2 Stop Control SRC 1 Stop Control SRC 0 Stop Control Type RW RW RW RW RW RW RW RW 0 1 See Frequency Select Table SS Disabled Off SS Enabled On Free Running Stops with PCI_STOP# Assertion Default Latch Latch 1 1 0 0 0 0 Byte 1 LCD Quick Config and CPU Stop ControlRegister Bit 7 6 5 4 3 2 1 0 Pin Name CPU_ITP_STOP CPU1_STOP CPU0_STOP LCD_SS_EN LCD_SSC_SEL LCD_CF2 LCD_CF1 LCD_CF0 Description CPU_ITP Stop Control CPU1 Stop Control CPU0 Stop Control Turns on SS for LCD PLL Select down or center SSC PLL3 Quick Config Bit 2 PLL3 Quick Config Bit 1 PLL3 Quick Config Bit 0 Type RW RW RW RW RW RW RW RW 0 Free Running Off Down spread 1 Stops with CPU_STOP# assertion On Center spread See Table 2: LCD Quick Configuration Default 0 1 1 1 0 0 0 1 Byte 2 Output Enable and Stop Control Register Bit 7 6 5 4 3 2 1 0 Pin Name PCI_F2_STOP PCI1_STOP PCI0_STOP REF_OE USB_OE PCIF2_OE PCI1_OE PCI0_OE Description Free running PCI Stop Control PCI1 Stop Control PCI 0 Stop Control Output enable for REF Output enable for USB Output enable for PCI2 Output enable for PCI1 Output enable for PCI0 Type RW RW RW RW RW RW RW RW Description Output enable for CPU_ITP Output enable for CPU1 Output enable for CPU0 Reserved Output enable for SRC4 Output enable for SRC4 Output enable for SRC4 Output enable for SRC4 0 Disabled Disabled Disabled Disabled Disabled 1 Stops with PCI_STOP# assertion Output Enabled Output Enabled Output Enabled Output Enabled Output Enabled Default 0 1 1 1 1 1 1 1 Type RW RW RW RW RW RW RW RW 0 Output Disabled Output Disabled Output Disabled 1 Output Enabled Output Enabled Output Enabled Output Output Output Output Output Output Output Output Default 1 1 1 0 1 1 1 1 Type RW RW RW RW RW RW RW RW 0 Output Disabled Output Disabled 1 Output Enabled Output Enabled Not controlled by CLKREQ# Controlled by CLKREQ# Free Running Output Output Output Output Output Byte 3 Output Enable Register Bit 7 6 5 4 3 2 1 0 Pin Name CPU_ITP_OE CPU1_OE CPU0_OE Reserved SRC3_OE SRC2_OE SRC1_OE SRC0_OE Disabled Disabled Disabled Disabled Enabled Enabled Enabled Enabled Byte 4 Output Enable and CLKREQ# Control Register Bit 7 6 5 4 3 2 1 0 Pin Name DOT96_OE LCD100_OE Reserved Reserved SRC3_CR SRC2_CR SRC1_CR SRC0_CR Description Output enable for DOT96 Output enable for LCD100 Reserved Reserved SRC3 CLKREQ3# Enable SRC2 CLKREQ2# Enable SRC1 CLKREQ1# Enable SRC0 CLKREQ0# Enable IDT® PC MAIN CLOCK - CK540 Default 1 1 0 0 0 0 0 0 1247B—07/19/10 11 9UMS9001 PC MAIN CLOCK - CK540 Advance Information Byte 5 Drive Strength Control Register Bit 7 6 5 4 3 2 1 0 Pin Name PCI_F2 Strength PCI1 Strength PCI0 Strength 48MHz Strength REF Strength IO_VOUT2 IO_VOUT1 IO_VOUT0 Description Sets the PCI_F2 output drive strength Sets the PCI1 output drive strength Sets the PCI0 output drive strength Sets the 48MHz output drive strength Sets the REF output drive strength IO Output Voltage Select (Most Significant Bit) IO Output Voltage Select IO Output Voltage Select (Least Significant Bit) Type RW RW RW RW RW RW RW RW 0 1 1 Load 2 Loads 2 Loads 3 Loads Description Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Type RW RW RW RW RW RW RW RW 0 1 Default 0 0 0 0 0 0 0 0 Description Type R R R R R R R R 0 1 Default X X X X 0 0 0 1 0 1 Reserved Reserved Reserved Reserved Type R R R R RW RW RW RW Default 0 0 1 1 0 0 0 1 Name Description Type 0 7 LCD_STOP LCD Stop Control RW Free Running 6 5 4 3 2 1 0 Reserved Reserved Test Mode Select Test Mode Entry Reserved Reserved PLL1_SS Reserved Reserved Allows test select, ignores Test Sel input pin Enters into test mode, ignores input pin Reserved Reserved PLL1 Spread Spectrum Mode RW RW RW RW RW RW RW See Table 3: V_IO Selection (Default is 0.8V) Default 1 1 1 1 1 1 0 1 Byte 6 Reserved Register Bit 7 6 5 4 3 2 1 0 Pin Name Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Byte 7 Vendor ID/ Revision ID Bit 7 6 5 4 3 2 1 0 Pin Name Rev Code Bit Rev Code Bit Rev Code Bit Rev Code Bit Vendor ID bit Vendor ID bit Vendor ID bit Vendor ID bit 3 2 1 0 3 2 1 0 Revision ID Vendor ID ICS is 0001, binary Vendor specific Byte 8 Device ID Register Bit 7 6 5 4 3 2 1 0 Pin Name Device_ID3 Device_ID2 Device_ID1 Device_ID0 Reserved Reserved Reserved Reserved Description Package ID code Devide ID = 0011 Hex 56-pin QFN Byte 9 Test Mode Register Bit Pin IDT® PC MAIN CLOCK - CK540 1 Stops with PCI_STOP# assertion Outputs HI-Z Normal operation Outputs = REF/N Test mode Down-spread Center-spread Default 0 0 0 0 0 0 0 0 1247B—07/19/10 12 9UMS9001 PC MAIN CLOCK - CK540 Advance Information Test Clarification Table Comments TEST_SEL HW PIN Power-up w/ TEST_SEL = 1 to enter test mode Cycle power to disable test mode TEST_MODE -->low Vth input TEST_MODE is a real time input If TEST_SEL HW pin is 0 during power-up, test mode can be invoked through B9b3. If test mode is invoked by B9b3, only B9b4 is used to select HI-Z or REF/N FSLB/TEST_Mode pin is not used. Cycle power to disable test mode, one shot control SW HW TEST TEST_MODE ENTRY BIT HW PIN B9b3 REF/N or HI-Z B9b4 <2.0V >2.0V >2.0V >2.0V X 0 0 1 0 X X X 0 0 1 0 OUTPUT NORMAL HI-Z REF/N REF/N >2.0V 1 X 1 REF/N <2.0V X 1 0 HI-Z <2.0V X 1 1 REF/N B9b3: 1= ENTER TEST MODE, Default = 0 (NORMAL OPERATION) B9b4: 1= REF/N, Default = 0 (HI-Z) IDT® PC MAIN CLOCK - CK540 1247B—07/19/10 13 9UMS9001 PC MAIN CLOCK - CK540 Advance Information (Ref. ) Seating Plane (N D - 1)x e (Ref. ) A1 Index Area ND & NE Even A3 N L N Anvil Singulation 1 2 E2 OR E (Ref. ) b (Ref.) A D (N E - 1)x e E2 2 Sawn Singulation Top View e (Typ.) 2 If N D & N E are Even 1 e D2 2 ND & NE Odd Thermal Base D2 Chamfer 4x 0.6 x 0.6 max OPTIONAL C 0.08 C THERMALLY ENHANCED, VERY THIN, FINE PITCH QUAD FLAT / NO LEAD PLASTIC PACKAGE DIMENSIONS SYMBOL A A1 A3 b e DIMENSIONS MIN. MAX. 0.8 1.0 0 0.05 0.25 Reference 0.18 0.3 0.50 BASIC SYMBOL N ND NE D x E BASIC D2 MIN. / MAX. E2 MIN. / MAX. L MIN. / MAX. ICS 56L TOLERANCE 56 14 14 8.00 x 8.00 4.35 / 4.65 5.05 / 5.35 0.30 / 0.50 Ordering Information Part / Order Number 9UMS9001AKLF 9UMS9001AKLFT Shipping Package Tubes Tape and Reel Package 56-pin MLF 56-pin MLF Temperature 0 to +70° C 0 to +70° C “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant. “A” is the device revision designator (will not correlate with the datasheet revision). IDT® PC MAIN CLOCK - CK540 1247B—07/19/10 14 9UMS9001 PC MAIN CLOCK - CK540 Advance Information Revision History Rev. Issue Date Who A B 8/28/2008 7/19/2010 RDW RDW Description 1. Removed CK505 reference is Device ID byte of SMBus 2. Moved SMBus AFTER electrical characteristics 3. Made Data sheet Rev A device. 4. Move to Final 1. Corrected Pin type for Pins 8, 21, 23. Page # 8, 9, 10 2 Innovate with IDT and accelerate your future networks. Contact: www.IDT.com For Sales For Tech Support 800-345-7015 408-284-8200 Fax: 408-284-2775 408-284-6578 [email protected] Corporate Headquarters Asia Pacific and Japan Europe Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 (outside U.S.) IDT Singapore Pte. Ltd. 1 Kallang Sector #07-01/06 KolamAyer Industrial Park Singapore 349276 Phone: 65-6-744-3356 Fax: 65-6-744-1764 IDT Europe Limited 321 Kingston Road Leatherhead, Surrey KT22 7TU England Phone: 44-1372-363339 Fax: 44-1372-378851 © 2010 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT, ICS, and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA IDT® PC MAIN CLOCK - CK540 1247B—07/19/10 15