PRELIMINARY 1101 Series A1101R08A The A1101R08A is a high-performance, ETSI compliant radio module that incorporates the Texas Instruments CC1101 transceiver chip in the industry’s smallest package (9 x 16 x 2.5mm). Features • • • • • • • • • • • • • • • Frequency range: 865-868 MHz ETSI compliant, shielded package Digital RSSI output Programmable output power up to +10dBm High sensitivity (-112 dBm at 1.2 kBaud, 868 MHz 1% packet error rate) Ultra-small package size 9 x 16 x 2.5mm LGA footprint RoHS compliant Operating temperature -40 to +85C Impedance-controlled, multi-layer PCB 1.8 to 3.6 VDC Low current consumption (15 mA in RX, 1.2 kBaud, 868 MHz ) 200 nA sleep mode current consumption Efficient SPI interface; all registers can be programmed with one “burst” transfer Available in tape & reel and matrix tray Block diagram Benefits • • • • • • • • • • • • • No RF engineering experience necessary No additional “Intentional Radiator” certification required (ETSI EN 300 220) Minimal real estate required Easily implemented on a two layer PCB No additional harmonic filtering required 100% RF-tested in production Common footprint for product family No additional DC decoupling required Integrated analog temperature sensor Excellent receiver selectivity and blocking performance Suitable for frequency hopping systems, thanks to a fast-settling frequency synthesizer with 90 µs settling time Impedance-matched balun for optimized efficiency Support for asynchronous and synchronous serial receive/transmit mode for backwards compatibility with existing radio communication protocols PLEASE NOTE: Additional information on the Texas Instruments CC1101 device can be found in the company’s latest datasheet release at http://www.ti.com This product shall not be used in any of the following products or systems without prior express written permission from Anaren Microwave, Inc: (i) implantable cardiac rhythm management systems, including without limitation pacemakers, defibrillators and cardiac resynchronization devices; (ii) external cardiac rhythm management systems that communicate directly with one or more implantable medical devices; or (iii) other devices used to monitor or treat cardiac function, including without limitation pressure sensors, biochemical sensors and neurostimulators. Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057 800.411.6596 / http://www.anaren.com / [email protected] PRELIMINARY Footprint Product overview Refer to User’s Manual for additional layout guidelines. Dimensions in mm. The A1101R08A is a high-performance, ETSI compliant radio module that incorporates the Texas Instruments CC1101 transceiver chip in the industry’s smallest package (9 x 16 x 2.5mm) and is compatible with all TI-approved software stacks. With an LGA pad footprint, this module is designed to effortlessly integrate into a wide range of applications, including: industrial control, building automation, low-power wireless sensor networks, lighting control, and automated meter reading. The A1101R08A has an RoHS-compliant ENIG finish and is packaged on tape and reel for highvolume automated manufacturing. Pin diagram Nomenclature DNC = Do Not Connect A 1 2 3 4 5 6 7 Chip series Function Frequency band Form factor Design ID Application Packaging (Anaren) (1101, 2500) (R = radio only) (x100MHz) (A = Internal Antenna, C = Connector) (00 = Default) (G = General) (R = Tape/Reel, M = Matrix Tray) Caution! ESD sensitive device. Precautions should be used when handling the device in order to prevent permanent damage. Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057 800.411.6596 / http://www.anaren.com / [email protected] 1104a