Section 2; Fil.Rep.LEDs for pdf 19/1/00 1:13 pm Page 42 FILAMENT REPLACEMENT LEDs - MULTI-LED CLUSTER • LED bulkhead unit • Outstanding reliability and optical performance • ‘Fit and Forget’ solution 084 SERIES MLQ = 1 LEDs Dimensions in mm (Typical) Scale 0.25:1 Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to a single unmodified discrete LED. PART NUMBER COLOUR LENS VOLTAGE AC/DC Vopr CURRENT DC lopr LUMINOUS INTENSITY lv@20mA WAVE LENGTH λp VIEWING ANGLE OPERATING TEMP Topr STORAGE TEMP Tstg Wide -20~+85 -20~+85 °C °C HIGH HIGHINTENSITY INTENSITY 084-501-22 Red 24 220 2750 084-521-22 Yellow Coloured Diffused 24 220 4500 590 084-532-22 Green 24 220 6000 525 084-930-22 Blue 084-997-22 White 084-501-75 Red 084-521-75 Yellow 660 24 220 2000 470 24 220 3000 • 110 40 2750 660 Coloured Diffused 110 40 4500 590 Water Clear 084-532-75 Green 110 40 6000 525 084-930-75 Blue 110 40 2000 470 084-997-75 White 110 40 3000 • 084-501-76 Red 230* 20 2750 660 084-521-76 Yellow Coloured Diffused 230* 20 4500 590 084-532-76 Green 230* 20 6000 525 230* 20 2000 470 230* 20 3000 • Vac/Vdc mA mcd nm 084-930-76 Blue 084-997-76 White Water Clear Water Clear UNITS * = 230 Volt product is available in AC only • = Typical emission colour: x=0.31, y=0.32. Colour temperature 8000K. Intensities (Iv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. FOR NEW PRODUCTS SEE OUR WEBSITE Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 • email: [email protected] • website: www.marl.co.uk • website: www.marl-leds.com