Preliminary Datasheet AH922 UNIPOLAR HALL-EFFECT SWITCH General Description Features The AH922 is a unipolar Hall-effect one-chip switch with digital output, solution for sense magnetic field. It is designed in mixed signal CMOS and chopper technology. This IC is quite suitable for use in automotive, industrial and consumer applications. The two sensors are suited for operation over extended temperature ranges. • • • • • • • The AH922 Hall-effect switch is combined with a voltage regulator, Hall-voltage generator, chopper small-signal amplifier, Schmitt trigger and open-drain output. Wide Operating Voltage Range Chopper Stabilization Extremely Low Switch Point Drift Superior Temperature Stability High Sensitivity Integrated Hall Sensor Solid State Reliability Robust EMC Capability Applications • • • • The AH922 is available in TO-92S-3 and SOT-23-3 packages. TO-92S-3 5V/12V DC Brushless Motor/Fan Solid State Switch Speed Detection Revolution Counting SOT-23-3 Figure 1. Package Types of AH922 Nov. 2011 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 1 Preliminary Datasheet AH922 UNIPOLAR HALL-EFFECT SWITCH Pin Configuration Z3 Package (TO-92S-3) N Package (SOT-23-3) 3 3 2 1 2 1 (Front View) (Top View) Figure 2. Pin Configuration of AH922 Pin Description Pin Number TO-92S-3 SOT-23-3 Pin Name Function 1 1 VCC Supply voltage 2 3 GND Ground pin 3 2 OUT Output pin Nov. 2011 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 2 Preliminary Datasheet AH922 UNIPOLAR HALL-EFFECT SWITCH Functional Block Diagram Figure 3. Functional Block Diagram of AH922 Nov. 2011 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 3 Preliminary Datasheet AH922 UNIPOLAR HALL-EFFECT SWITCH Ordering Information AH922 - G1: Green Circuit Type TR: Tape & Reel Blank: Bulk Package Z3: TO-92S-3 N: SOT-23-3 Package Temperature Range TO-92S-3 Part Number Marking ID Packing Type AH922Z3-G1 922 Bulk AH922NTR-G1 GT4 Tape & Reel -40 to 125°C SOT-23-3 BCD Semiconductor's Pb-free products, as designated with "G1" suffix in the part number, are RoHS compliant and green. Nov. 2011 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 4 Preliminary Datasheet AH922 UNIPOLAR HALL-EFFECT SWITCH Absolute Maximum Ratings (Note 1) Parameter Symbol Value Unit Supply Voltage VCC 24 V Output Current (Continuous) IOUT 25 mA Power Dissipation Operation Temperature Storage Temperature Maximum Junction Temperature ESD (Human Body Model) TO-92S-3 400 SOT-23-3 230 PD mW TA -50 to 150 ºC TSTG -65 to 150 ºC TJ (Max) 165 ºC ESD 4000 V Note 1: Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “Recommended Operating Conditions” is not implied. Exposure to “Absolute Maximum Ratings” for extended periods may affect device reliability. Recommended Operating Conditions Parameter Symbol Min Max Unit Supply Voltage VCC 3.5 22 V Operating Ambient Temperature TA -40 125 ºC Nov. 2011 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 5 Preliminary Datasheet AH922 UNIPOLAR HALL-EFFECT SWITCH Electrical Characteristics VCC =12V, TA=25°C, unless otherwise specified. Parameter Symbol Supply Voltage VCC Supply Current ICC Saturation Voltage Conditions Min Typ Max Unit 3.5 12 22 V VCC=12V, B<BRP 3 5 mA VCC=12V, B>BOP 3 5 mA Operating VSAT IOUT=20mA, B>BOP 185 500 mV ILEAKAGE VOUT=20V, B<BRP 0.1 5 µA Output Rising Time tRISING RL=1kΩ,CL=20pF 0.4 2 µs Output Falling Time tFALLING RL=1kΩ,CL=20pF 0.4 2 µs Output Leakage Current Magnetic Characteristics VCC =12V, TA=25°C, unless otherwise specified. Parameter Symbol Min Typ Max Unit Operating point BOP 80 110 140 Gauss Releasing point BRP 35 65 95 Gauss Hysteresis BHYS 20 45 70 Gauss Nov. 2011 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 6 Preliminary Datasheet AH922 UNIPOLAR HALL-EFFECT SWITCH Magnetic Characteristics (Continued) Figure 4. Magnetic Flux Density of AH922 Nov. 2011 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 7 Preliminary Datasheet AH922 UNIPOLAR HALL-EFFECT SWITCH Test Circuit and Test Conditions Figure 5. Test Circuit of AH922 Figure 6. Test Condition of AH922 (Supply Current) Note 2: The output is open during measurement. Note 3: The device is put under the magnetic field: B<BRP. Nov. 2011 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 8 Preliminary Datasheet AH922 UNIPOLAR HALL-EFFECT SWITCH Test Circuit and Test Conditions (Continued) Figure 7. Test Condition of AH922 (Output Saturation Voltage) Note 4: The output saturation voltage VSAT is measured at VCC=12V. Note 5: The device is put under the magnetic field: B>BOP. Figure 8. Test Condition of AH922 (Output Leakage Current) Note 6: The device is put under the magnetic field: B<BRP. Note 7: VDC=12V. Nov. 2011 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 9 Preliminary Datasheet AH922 UNIPOLAR HALL-EFFECT SWITCH Typical Performance Characteristics 4.0 4.5 4.0 3.5 ICC (mA) ICC (mA) 3.5 3.0 2.5 3.0 2.5 2.0 2.0 VCC=3.5V VCC=5V 1.5 VCC=12V VCC=24V 1.0 1.5 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 -25 0 25 220 140 200 120 180 125 100 160 VCC=3.5V VCC=5V VSAT (mV) VSAT (mV) 100 Figure 10. ICC vs. TA 160 80 60 VCC=12V VCC=24V IOUT=20mA 140 120 40 100 20 80 5 10 15 20 -25 25 0 25 50 75 100 125 o IOUT (mA) TA ( C) Figure 11. VSAT vs. IOUT Nov. 2011 75 TA ( C) Figure 9. ICC vs. VCC 0 0 50 o VCC (V) Figure 12. VSAT vs. TA Rev. 1. 0 BCD Semiconductor Manufacturing Limited 10 Preliminary Datasheet AH922 UNIPOLAR HALL-EFFECT SWITCH Typical Performance Characteristics (Continued) 150 150 140 BOP 130 BRP BHYS 100 90 80 70 100 90 80 70 60 50 50 40 40 30 20 -50 30 6 8 10 12 14 16 18 20 22 24 26 BHYS 110 60 4 BRP 120 110 2 BOP 130 BOP/BRP/BHYS (Gauss) BOP/BRP/BHYS (Gauss) 120 140 -25 0 25 50 75 100 125 150 o VCC (V) TA ( C) Figure 13. BOP/ BRP/ BHYS vs. VCC Figure 14. BOP/ BRP/ BHYS vs. TA 450 400 SOT-23-3 TO-92S-3 350 PD (mW) 300 250 200 150 100 50 0 0 25 50 75 100 125 150 o TA ( C) Figure 15. PD vs. TA Nov. 2011 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 11 Preliminary Datasheet AH922 UNIPOLAR HALL-EFFECT SWITCH Typical Application Output RL VCC CL 0.1 F Figure 16. Typical Application Circuit of AH922 Nov. 2011 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 12 Preliminary Datasheet UNIPOLAR HALL-EFFECT SWITCH AH922 Mechanical Dimensions TO-92S-3 Unit: mm(inch) ° ° Nov. 2011 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 13 Preliminary Datasheet AH922 UNIPOLAR HALL-EFFECT SWITCH Mechanical Dimensions (Continued) SOT-23-3 Unit: mm(inch) 2. 820(0. 111) 3. 020(0. 119) 0. 100(0. 004) 0. 200(0. 008) 0.300(0.012) 0.600(0.024) 1.500(0.059) 1.700(0.067) 2.650(0.104) 2.950(0.116) 1. 300(0. 051) 1. 600(0. 063) Package Sensor Location 0. 200(0. 008) 0. 770(0. 030) 1. 070(0. 042) 1. 800(0. 071) 2. 000(0. 079) 0 8 0. 300(0. 012) 0. 500(0. 020) 1.450(0.057) MAX. 0. 950(0. 037) TYP 0. 000(0. 000) 0. 150(0. 006) 0. 900(0. 035) 1. 300(0. 051) Nov. 2011 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 14 BCD Semiconductor Manufacturing Limited http://www.bcdsemi.com IMPORTANT NOTICE IMPORTANT NOTICE BCD Semiconductor BCD Semiconductor Manufacturing Manufacturing Limited Limited reserves reserves the the right right to to make make changes changes without without further further notice notice to to any any products products or or specifispecifications herein. cations herein. BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited does does not not assume assume any any responsibility responsibility for for use use of of any any its its products products for for any any particular purpose, particular purpose, nor nor does does BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited assume assume any any liability liability arising arising out out of of the the application application or or use use of any of any its its products products or or circuits. circuits. BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited does does not not convey convey any any license license under under its its patent patent rights rights or or other rights other rights nor nor the the rights rights of of others. others. MAIN SITE SITE MAIN - Headquarters BCD Semiconductor Manufacturing Limited BCD Semiconductor Manufacturing Limited - Wafer Fab No. 1600, Zi Xing Road, Shanghai ZiZhu Science-basedLimited Industrial Park, 200241, China Shanghai SIM-BCD Semiconductor Manufacturing Tel: Fax: +86-21-24162277 800,+86-21-24162266, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6485 1491, Fax: +86-21-5450 0008 REGIONAL SALES OFFICE Shenzhen OfficeSALES OFFICE REGIONAL - Wafer FabSemiconductor Manufacturing Limited BCD Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. - IC Design Group 800 Yi Shan Road, Shanghai 200233, China Corporation Advanced Analog Circuits (Shanghai) Tel: +86-21-6485 1491,YiFax: 0008200233, China 8F, Zone B, 900, Shan+86-21-5450 Road, Shanghai Tel: +86-21-6495 9539, Fax: +86-21-6485 9673 Taiwan Office Shanghai Semiconductor Manufacturing Co., Ltd., Shenzhen Office BCD Taiwan Semiconductor Shenzhen SIM-BCD Office Office (Taiwan) Company Limited Unit A Room 1203, Skyworth Bldg., Gaoxin Ave.1.S., Nanshan Shenzhen, 4F, 298-1, Guang Road,(Taiwan) Nei-Hu District, Taipei, Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd.District, Shenzhen Office BCDRui Semiconductor Company Limited China Taiwan Advanced Analog Circuits (Shanghai) Corporation Shenzhen Office 4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei, Tel: +86-755-8826 Tel: +886-2-2656 2808 Room E, 5F, Noble 7951 Center, No.1006, 3rd Fuzhong Road, Futian District, Shenzhen 518026, China Taiwan Fax: +86-755-88267951 7865 Fax: +886-2-2656 28062808 Tel: +86-755-8826 Tel: +886-2-2656 Fax: +86-755-8826 7865 Fax: +886-2-2656 2806 USA Office BCD Office Semiconductor Corp. USA 30920Semiconductor Huntwood Ave.Corporation Hayward, BCD CA 94544, USA Ave. Hayward, 30920 Huntwood Tel :94544, +1-510-324-2988 CA U.S.A Fax:: +1-510-324-2988 +1-510-324-2788 Tel Fax: +1-510-324-2788