Series AM15EW-IZ 15 Watt | DC-DC Converter FEATURES: • RoHS compliant • Wide 4:1 input range • Low ripple and noise • Remote On/Off control • • • • Power modules for PCB mounting Regulated output Operating temperature range: -40 to +75ºC Capacitive loading up to 4500 µF (18-75V input) Models Single output Model Input Voltage (V) Output Voltage (V) 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 3.3 5 12 15 3.3 5 12 15 Input Voltage (V) Output Voltage (V) 9-36 9-36 9-36 18-72 18-72 18-72 ±5 ±12 ±15 ±5 ±12 ±15 AM15EW-2403SIZ AM15EW-2405SIZ AM15EW-2412SIZ AM15EW-2415SIZ AM15EW-4803SIZ AM15EW-4805SIZ AM15EW-4812SIZ AM15EW-4815SIZ Output Current max (A) Ripple & Noise % Vout, max Isolation (VDC) Efficiency (%) 80mV p-p 80mV p-p 1 1 80mV p-p 80mV p-p 1 1 1500 1500 1500 1500 1500 1500 1500 1500 77 80 85 84 77 80 85 84 Ripple & Noise % Vout, max Isolation (VDC) Efficiency (%) 1 1 1 1 1 1 1500 1500 1500 1500 1500 1500 80 85 84 80 85 84 4 3 1.25 1 4 3 1.25 1 Models Dual output Model AM15EW-2405DIZ AM15EW-2412DIZ AM15EW-2415DIZ AM15EW-4805DIZ AM15EW-4812DIZ AM15EW-4815DIZ Output Current max (A) ±1.5 ±0.625 ±0.5 ±1.5 ±0.625 ±0.5 Input Specifications Parameters Conditions Typical Voltage range Maximum 9-36 18-75 π (Pi) Network Filter Units VDC Isolation Specifications Parameters Rated voltage Resistance Capacitance Conditions Typical 60 sec Maximum Units VDC MOhm pF Maximum Units ±2 % ±0.5 % 1500 > 1000 1000 Output Specifications Parameters Voltage accuracy Short Circuit protection Over voltage protection Over load protection Line voltage regulation (Single) www.aimtec.com Conditions Auto recovery Auto recovery HL-LL Typical Continuous, Zener diode clamp protection Over 110% full load Tel: +1 514 620 2722 1 of 2 Toll free: + 1 888 9 AIMTEC (926 6832) North America only Series AM15EW-IZ 15 Watt | DC-DC Converter Output Specifications (continued) Parameters Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Dual) Temperature coefficient Conditions Typical HL-LL 25-100% 25-100% Maximum Units ±0.5 ±0.5 ±2 % % % %/oC ±0.05 General Specifications Parameters Switching frequency Operating temperature Storage temperature Case temperature Cooling Humidity Case material Weight Dimensions MTBF Conditions Typical 100% load Without derating 200 -40 to +75 -55 to +115 Maximum Units KHz o C o C o C 95 Free air convection Non condensing 95 % Nickel coated copper with non-conductive base 33 g Tolerance ±0.5mm 2.00 x 1.0 x 0.4 inches 50.8 x 25.4 x 10.2 mm > 800 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) Pin Out Specifications Dimensions Pin Single Dual 1 2 3 4 5 6 On/Off Control -V Input +V Input -V Output No pin +V Output On/Off Control -V Input +V Input -V Output Common +V Output Block diagram www.aimtec.com Tel: +1 514 620 2722 2 of 2 Toll free: + 1 888 9 AIMTEC (926 6832) North America only