AM30KW-C Series • POWER MODULES FOR PCB MOUNTING • SIX-SIDED CONTINUOUS SHIELD • 4:1 WIDE INPUT RANGE • HIGH EFFICIENCY • STANDARD PACKAGE GENERAL DESCRIPTION Our AM30KW-C series is a family of cost effective 30W single and dual output DC-DC converters. These converters are shielded on all six sides and encapsulated with a nickel-coated copper with a non-conductive base and dimensions of 50.8x40.64x11.9mm. The high performance features of our AM30KW-C components include short circuit protection with hiccup auto recovery, tight line regulation and a high efficiency operation coefficient up to 89%. 18 models operate from an input voltage of 24, 48VDC producing output voltages of 1.8, 2.5, 3.3, 5, 12, 15 & 24VDC, ±5, ±12, ±15VDC . The normal operation is specified over the full operating temperature range of 25°C to +71°C with no derating required. Cooling is done by free air convection. ELECTRICAL SPECIFICATIONS All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Input Specifications: Output Specifications: Voltage range 24 VDC, 10~40VDC Voltage accuracy ±2%, max. 48 VDC, 18~75VDC Ripple (1.8 & 5V) 100mVmax Filter π (Pi) Network Ripple (Others) ±1%, max. Noise ±1%, max. Isolation Specifications: Short circuit protection Hiccup, auto-recovery Rated voltage 1500VDC Over current protection Works over 120% of rating Resistance >1000 Mohms and recovers automatically Capacitance 1000pF Over voltage protection Zener diode clamp protection Line regulation (HL-LL) ±0.5%, typ. General Specifications: Load regulation (10-100%)±1%, typ.,100mV, max -(1,8 - 5V) Efficiency 78% to 83% Temperature coefficient ±0.02%/°C, typ. Switching frequency 300KHz, typ. 100% load Physical Specifications: Environmental Specifications: Dimensions 50.8 x 40.6 x 11.9mm,±0.5mm Operating temperature -25°C …+70°C 2.0 x 1.6 x 0.47inches Storage temperature -55°C …+105°C Weight 58g Case temperature +100°C, max. Case material Nickel-Coated Copper with Humidity (non-condensing) Up to 95% Non-Conductive base, Cooling Free-air convection six sides’ shielded MTBF: > 550,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25ºC) Specifications are subject to change without notification Continued on next page VISIT US AT WWW.AIMTEC.CA DC-DC CONVERTERS 30 watt dc-dc converters AM30KW-C Series OUTLINE DIMENSIONS & PIN CONNECTIONS MECHANICAL DIMENSION (Top View) DC-DC CONVERTERS Pin 1 2 3 4 5 6 7 DERATING BLOCK DIAGRAM SINGLE OUTPUT VOLTAGE Single Dual ON/Off +V Input -V Input Trim - V Output Common +V Output +V Output No Pin TRIMMING (V.DC) : 1.8V, 2.5V, 3.3V, 5V SINGLE OUTPUT VOLTAGE (V.DC) : 12V, 15V, 24V DUAL OUTPUT VOLTAGE TO ORDER CALL 1-888-9-AIMTEC AM30KW-C Series MODELS Single output DC-DC CONVERTERS Models AM30KW-2401SC AM30KW-2402SC AM30KW-2403SC AM30KW-2405SC AM30KW-2412SC AM30KW-2415SC AM30KW-2424SC AM30KW-4801SC AM30KW-4802SC AM30KW-4803SC AM30KW-4805SC AM30KW-4812SC AM30KW-4815SC AM30KW-4824SC Input Voltage 10VDC-40VDC 18VDC-75VDC Ouput Voltage 1.8VDC 2.5VDC 3.3VDC 5VDC 12VDC 15VDC 24VDC 1.8VDC 2.5VDC 3.3VDC 5VDC 12VDC 15VDC 24VDC Ouput Current max. 6000mA 6000mA 6000mA 6000mA 2500mA 2000mA 1250mA 6000mA 6000mA 6000mA 6000mA 2500mA 2000mA 1250mA MODELS Dual output Models Input Voltage Ouput Voltage Ouput Current max. AM30KW-2412DC AM30KW-4805DC AM30KW-4812DC AM30KW-4815DC 10VDC-40VDC ±12VDC ±5VDC ±12VDC ±15VDC 1250mA 3000mA 1250mA 1000mA 18VDC-75VDC TO ORDER CALL 1-888-9-AIMTEC