ETC AMP-06

The Analog Mixed Signal Company
Amplifier
ID:
011
Name
AMP-06
Description
This op-amp is designed for on chip signal processing, especially as a low-noise amplifier. It uses pole splitting for
compensation and is designed for stable operation at unity gain frequency. The results are simulated with extracted
parasitics. To adapt this op-amp to other demands, scale the output stage and the Miller-cap or change the bias
currents.
Conditions
Temperature
Reference Current (Iref)
VDD
27°C
10 µA
2.5 V
VSS
-2.5 V
Load
100 kOhms || 10 pF
Simulated Data
Symbol
VDD
Unit
V
Reference Current
Iref
µA
Supply Current
IDD
µA
Input Offset Voltage
VIO
mV
Parameter
Supply Voltage
Min
Typ
5
Max
Condition
270
Unity Gain
10
Unity Gain, No Parasitics, delta
L=0.1µm
Unity Gain, No Parasitics, delta
L=0.1µm
1.23
TK VIO
Voltage Gain
Transit Frequency
Phasemargin
0.01% Settling Time
Slew Rate
Maximum Large Signal
Frequency
Output Swing
TK(VIO)
µV/K
v
fT
Îm
dB
MHz
S
VOUT
Static Nonlinearity
Common Mode Range
Common Mode Rejection Ratio
Power Supply Rejection Ratio
15.13
98.9
8.42
ns
V/µs
627
2.95
Amplitude = 0.5 V
Amplitude = 0.5 V
kHz
325
Amplitude = +/- 1.5V
V
-2.44
-2.4
ppm
VCM
V
CMRR
PSRR
dB
dB
-2.25
-1.25
170.8
186.2
1.57
1.55
5
< 10 ppm
< 5 ppm
VDD = +5 V, Unity Gain
CMRR > 54dB @ 10 Hz
CMRR > 171dB @ 10 Hz
f CM= 100 Hz, VCM = 0V
f PS= 100 Hz