Advanced Monolithic Systems AMS6101 2A SWITCH STEP-UP DC/DC CONVERTER RoHS compliant FEATURES APPLICATIONS • 2A, 0.2Ω, internal switch • Operating voltage as low as 2.7V • 600 kHz operation frequency • Over temperature protection • 8-Lead SOIC-EDP package • LCD TVs and LCD monitors • Battery Chargers • Portable (Notebook) Computers • Handheld Devices • Portable Applications • Consumer Electronics • GSM/CDMA Phones • Digital Cameras GENERAL DESCRIPTION The AMS6101 is an adjustable step-up DC/DC converter with a 2A internal switch. With the ability to set the output voltage up to 23V, the AMS6101 is an ideal part for biasing TFT displays. The AMS6101 can be operated at switching frequencies of 600 kHz allowing for easy filtering and low noise. An external compensation pin gives the user flexibility in setting frequency compensation, which makes possible the use of small, low ESR ceramic capacitors at the output. The AMS6101 is available in a low profile 8-lead SOIC EDP (thermally enhanced) package. ORDERING INFORMATION OUTPUT VOLTAGE Adjustable PIN CONNECTIONS PACKAGE TYPE TEMP. 8 Lead SOIC RANGE AMS6101S -25°C to 125°C TYPICAL APPLICATION 8L SOIC SO Package (S) VCC 1 8 EN PGD 2 7 PGND SW 3 6 FB AGND 4 5 COMP Top View Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723 AMS6101 PIN DESCRIPTION AMS6101 PIN NUMBERS 1 NAME DESCRIPTION VCC Analog power input. 2 PWGD 3 SW Power good output. Open collector output. A low on the pin indicates that the output is less than the desired output voltage. There is an internal rising filter on the output of the PWGD comparator. Power switch input. Internal switch connected between SW pin and GND pin. 4 AGND Analog ground. 5 COMP Compensation network connection. Connected to the output of the voltage error amplifier. 6 F/B Feedback input pin of the error comparator. 7 PGND Power Ground-Noisy internal ground-Return currents from the power switch (SW). 8 EN Shutdown control input, active high. Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723 AMS6101 ABSOLUTE MAXIMUM RATINGS (note 1) VCC SW Voltage F/B Voltage Comp EN PWGD 15V 23V 7V 7V 7V 15V Maximum Junction Temperature Power Dissipation (Note2) Lead Temperature Vapor Phase (60 sec) Infrared (15 sec) ESD Susceptibility 150°C Internally Limited 300°C 215°C 220°C 2kV ELECTRICAL CHARACTERISTICS Electrical Characteristics at TA= 25 °C, VIN=2.7V, IL = 0A (unless otherwise noted) PARAMETER Quiescent Current TEST CONDITIONS Min. (Note3) FB = 0V (Not Switching) V EN = 0V Feedback Voltage Switch Current Limit VIN = 2.7 (Note 5) Load Regulation VIN = 3.3V Feedback Voltage Line Regulation FB Pin Bias Current Input Voltage Range Error Amp Transconductance Error Amp Voltage Gain Maximum Duty Cycle Switching Frequency Shutdown Pin Current 2.0V ≤ VIN ≤ 12.0V Switch Leakage Current Switch RDSON Enable Threshold ∆I = 5µA 1.2285 3 2.0 mA 5 10 µA 1.26 4 1.2915 0.9 135 135 85 600 0.01 -0.5 0.01 0.2 0.6 0.6 1.92 1.82 195 V A mV/mA 0.013 0.5 2.5 40 Units 1.3 6.7 78 480 V EN = VIN V EN = 0V V SW = 18V VIN = 2.7V, ISW = 1A Output High Output Low AMS6101 Typ. Max. (Note4) (Note3) 0.1 20 15 290 720 0.1 -1 3 0.4 %V nA V µmho V/V % kHz µA µA Ω V V V V 0.3 On Threshold 1.8 2.0 Off Threshold 1.7 1.9 Thermal Resistance Junction to Ambient Note: 1). Absolute maximum ratings are limits beyond which damage to the device may occur. Operating Ratings are conditions for which the device is intended to be functional. 2). The maximum allowable power dissipation is a function of the maximum junction temperature, TJ(MAX), the junction-toambient thermal resistance, θJA, and the ambient temperature, TA. The maximum allowable power dissipation at any ambient temperature is calculated using: PD (MAX) = (TJ (MAX) – TA) θJA. Exceeding the maximum allowable power dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. 3). All limits guaranteed at room temperature (standard typeface) and at temperature extremes (bold typeface). 4). Typical numbers are at 25°C and represent the most likely norm. 5). Current limit at 0% duty cycle. Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723 AMS6101 TYPICAL PERFORMANCE CHARACTERISTICS Full Load Switching Full Load Ripple (Wide Band) Start Up from Enable into Full Load Start Up from Enable into Light Load Switch Full Load Rise Time Switch Full Load Fall Time Efficiency 90 88 86 84 % 82 80 78 76 74 72 70 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5 Load Current Efficiency for 5V input and 12V Output Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723 AMS6101 PACKAGE DIMENSIONS inches (millimeters) unless otherwise noted. 8 LEAD SOIC PLASTIC PACKAGE (S) 0.189-0.197* (4.801-5.004) 8 7 6 8 5 0.228-0.244 (5.791-6. 197) 0.123 (3.12) 0.137 (3.48) 7 6 5 0.150-0.157** (3.810-3.988) 1 2 3 1 4 2 3 4 0.010-0.020 x 45° (0.254-0.508) 0.053-0.069 (1.346-1.752) 0.004-0.010 (0.101-0.254) 0.014-0.019 (0.355-0.483) 0.024(0.61) 0.090 (2.28) 0.102 (2.59) 0.050 (1.270) TYP 0.008-0. 010 (0.203-0.254) 0°-8 ° TYP 0.016-0.050 (0.406-1.270) S (SO- 8 ) AMS DRW# 042293 *DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE 0.050(1.27) 0.063(1.60) **DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE 0.105(2.67) 0.213(5.41) 0.138 (3.50) RECOMMENDED LAYOUT PATTERN Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723