APT24M80B
APT24M80S
800V, 25A, 0.39Ω Max
N-Channel MOSFET
Power MOS 8™ is a high speed, high voltage N-channel switch-mode power MOSFET.
A proprietary planar stripe design yields excellent reliability and manufacturability. Low
switching loss is achieved with low input capacitance and ultra low Crss "Miller" capacitance. The intrinsic gate resistance and capacitance of the poly-silicon gate structure
help control slew rates during switching, resulting in low EMI and reliable paralleling,
even when switching at very high frequency. Reliability in flyback, boost, forward, and
other circuits is enhanced by the high avalanche energy capability.
TO
-2
47
D3PAK
APT24M80B
APT24M80S
D
Single die MOSFET
G
S
TYPICAL APPLICATIONS
FEATURES
• Fast switching with low EMI/RFI
• PFC and other boost converter
• Low RDS(on)
• Buck converter
• Ultra low Crss for improved noise immunity
• Two switch forward (asymmetrical bridge)
• Low gate charge
• Single switch forward
• Avalanche energy rated
• Flyback
• RoHS compliant
• Inverters
Absolute Maximum Ratings
Symbol
ID
Parameter
Unit
Ratings
Continuous Drain Current @ TC = 25°C
25
Continuous Drain Current @ TC = 100°C
16
A
IDM
Pulsed Drain Current
VGS
Gate-Source Voltage
±30
V
EAS
Single Pulse Avalanche Energy 2
975
mJ
IAR
Avalanche Current, Repetitive or Non-Repetitive
12
A
1
85
Thermal and Mechanical Characteristics
Min
Characteristic
Typ
Max
Unit
W
PD
Total Power Dissipation @ TC = 25°C
625
RθJC
Junction to Case Thermal Resistance
0.20
RθCS
Case to Sink Thermal Resistance, Flat, Greased Surface
Operating and Storage Junction Temperature Range
150
°C
Soldering Temperature for 10 Seconds (1.6mm from case)
WT
Package Weight
300
0.22
oz
6.2
g
10
in·lbf
1.1
N·m
Mounting Torque ( TO-247 Package), 6-32 or M3 screw
MicrosemiWebsite-http://www.microsemi.com
04-2009
TL
Torque
-55
Rev B
TJ,TSTG
°C/W
0.11
050-8135
Symbol
Static Characteristics
TJ = 25°C unless otherwise specified
Symbol
Parameter
VBR(DSS)
Drain-Source Breakdown Voltage
ΔVBR(DSS)/ΔTJ
Breakdown Voltage Temperature Coefficient
RDS(on)
Drain-Source On Resistance
VGS(th)
Gate-Source Threshold Voltage
ΔVGS(th)/ΔTJ
IGSS
Gate-Source Leakage Current
Dynamic Characteristics
Symbol
Forward Transconductance
Ciss
Input Capacitance
Crss
Reverse Transfer Capacitance
Coss
Output Capacitance
3
VDS = 800V
TJ = 25°C
VGS = 0V
TJ = 125°C
Typ
Max
0.87
0.31
4
-10
0.39
5
100
500
±100
VGS = ±30V
Unit
V
V/°C
Ω
V
mV/°C
µA
nA
TJ = 25°C unless otherwise specified
Parameter
gfs
800
VGS = VDS, ID = 1mA
Threshold Voltage Temperature Coefficient
Zero Gate Voltage Drain Current
Min
VGS = 10V, ID = 12A
3
IDSS
Test Conditions
VGS = 0V, ID = 250µA
Reference to 25°C, ID = 250µA
APT24M80B_S
Min
Test Conditions
VDS = 50V, ID = 12A
VGS = 0V, VDS = 25V
f = 1MHz
Co(cr)
4
Effective Output Capacitance, Charge Related
Co(er)
5
Effective Output Capacitance, Energy Related
Typ
21
4595
80
455
Max
Unit
S
pF
215
VGS = 0V, VDS = 0V to 533V
Qg
Total Gate Charge
Qgs
Gate-Source Charge
Qgd
Gate-Drain Charge
td(on)
Turn-On Delay Time
tr
td(off)
tf
Current Rise Time
Turn-Off Delay Time
105
150
25
75
26
38
115
33
VGS = 0 to 10V, ID = 12A,
VDS = 400V
Resistive Switching
VDD = 533V, ID = 12A
RG = 4.7Ω 6 , VGG = 15V
Current Fall Time
nC
ns
Source-Drain Diode Characteristics
Symbol
IS
ISM
Parameter
Continuous Source Current
(Body Diode)
Pulsed Source Current
(Body Diode) 1
VSD
Diode Forward Voltage
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
dv/dt
Peak Recovery dv/dt
Test Conditions
MOSFET symbol
showing the
integral reverse p-n
junction diode
(body diode)
Min
Typ
D
Max
Unit
25
A
G
85
S
ISD = 12A, TJ = 25°C, VGS = 0V
ISD = 12A, VDD = 100V 3
diSD/dt = 100A/µs, TJ = 25°C
ISD ≤ 12A, di/dt ≤1000A/µs, VDD = 533V,
TJ = 125°C
1.0
880
11
V
ns
µC
10
V/ns
1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature.
2 Starting at TJ = 25°C, L = 13.54mH, RG = 10Ω, IAS = 12A.
04-2009
3 Pulse test: Pulse Width < 380µs, duty cycle < 2%.
4 Co(cr) is defined as a fixed capacitance with the same stored charge as COSS with VDS = 67% of V(BR)DSS.
5 Co(er) is defined as a fixed capacitance with the same stored energy as COSS with VDS = 67% of V(BR)DSS. To calculate Co(er) for any value of
VDS less than V(BR)DSS, use this equation: Co(er) = 1.46E-8/VDS^2 + 1.87E-8/VDS + 7.21E-11.
6 RG is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452)
050-8135
Rev B
Microsemi reserves the right to change, without notice, the specifications and information contained herein.
APT24M80B_S
60
30
V
GS
= 10V
T = 125°C
J
TJ = -55°C
V
GS
= 10, & 15V
25
ID, DRIAN CURRENT (A)
ID, DRAIN CURRENT (A)
50
40
TJ = 25°C
30
20
TJ = 125°C
10
V
GS
= 6, & 6.5V
5.5V
20
15
5V
10
5
4.5V
TJ = 150°C
0
4V
0
0
5
10
15
20
25
30
VDS(ON), DRAIN-TO-SOURCE VOLTAGE (V)
0
Figure 2, Output Characteristics
90
NORMALIZED TO
VDS> ID(ON) x RDS(ON) MAX.
250µSEC. PULSE TEST
@ <0.5 % DUTY CYCLE
80
VGS = 10V @ 12A
2.5
ID, DRAIN CURRENT (A)
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
Figure 1, Output Characteristics
3.0
5
10
15
20
25
30
VDS, DRAIN-TO-SOURCE VOLTAGE (V)
2.0
1.5
1.0
70
60
50
TJ = -55°C
40
TJ = 25°C
30
TJ = 125°C
20
0.5
10
0
0
-55 -25
0
25 50 75 100 125 150
TJ, JUNCTION TEMPERATURE (°C)
Figure 3, RDS(ON) vs Junction Temperature
0
1
2
3
4
5
6
7
8
VGS, GATE-TO-SOURCE VOLTAGE (V)
Figure 4, Transfer Characteristics
6,000
30
TJ = -55°C
Ciss
20
TJ = 125°C
15
10
1,000
Coss
100
5
Crss
0
5
10
15
ID, DRAIN CURRENT (A)
Figure 5, Gain vs Drain Current
0
100 200 300 400 500 600 700 800
VDS, DRAIN-TO-SOURCE VOLTAGE (V)
Figure 6, Capacitance vs Drain-to-Source Voltage
90
16
ID = 12A
VDS = 160V
10
VDS = 400V
8
6
VDS = 640V
4
2
0
50
100
150
200
250
Qg, TOTAL GATE CHARGE (nC)
Figure 7, Gate Charge vs Gate-to-Source Voltage
70
60
50
TJ = 25°C
40
TJ = 150°C
30
20
10
0
0
0.3
0.6
0.9
1.2
1.5
VSD, SOURCE-TO-DRAIN VOLTAGE (V)
Figure 8, Reverse Drain Current vs Source-to-Drain Voltage
04-2009
12
80
Rev B
14
0
10
20
050-8135
0
VGS, GATE-TO-SOURCE VOLTAGE (V)
C, CAPACITANCE (pF)
TJ = 25°C
ISD, REVERSE DRAIN CURRENT (A)
gfs, TRANSCONDUCTANCE
25
200
100
100
IDM
ID, DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
APT24M80B_S
200
10
13µs
100µs
1ms
1
10ms
Rds(on)
IDM
10
13µs
100µs
1
100ms
0.1
TJ = 125°C
TC = 75°C
1
1ms
10ms
100ms
DC line
Rds(on)
TJ = 150°C
TC = 25°C
Scaling for Different Case & Junction
Temperatures:
ID = ID(T = 25°C)*(TJ - TC)/125
DC line
0.1
10
100
800
VDS, DRAIN-TO-SOURCE VOLTAGE (V)
Figure 9, Forward Safe Operating Area
C
1
10
100
800
VDS, DRAIN-TO-SOURCE VOLTAGE (V)
Figure 10, Maximum Forward Safe Operating Area
0.20
D = 0.9
0.15
0.7
Note:
0.5
0.10
PDM
ZθJC, THERMAL IMPEDANCE (°C/W)
0.25
t1
t2
0.3
t1 = Pulse Duration
0.05
0
10-5
t
Duty Factor D = 1/t2
Peak TJ = PDM x ZθJC + TC
SINGLE PULSE
0.1
0.05
10-4
10-3
10-2
10-1
RECTANGULAR PULSE DURATION (seconds)
Figure 11. Maximum Effective Transient Thermal Impedance Junction-to-Case vs Pulse Duration
1.0
D3PAK Package Outline
TO-247 (B) Package Outline
15.49 (.610)
16.26 (.640)
Drain
6.15 (.242) BSC
5.38 (.212)
6.20 (.244)
Drain
(Heat Sink)
e3 100% Sn Plated
4.69 (.185)
5.31 (.209)
1.49 (.059)
2.49 (.098)
4.98 (.196)
5.08 (.200)
1.47 (.058)
1.57 (.062)
15.95 (.628)
16.05(.632)
13.79 (.543)
13.99(.551)
Revised
4/18/95
20.80 (.819)
21.46 (.845)
1.04 (.041)
1.15(.045)
13.41 (.528)
13.51(.532)
Revised
8/29/97
11.51 (.453)
11.61 (.457)
3.50 (.138)
3.81 (.150)
050-8135
Rev B
04-2009
0.46 (.018)
0.56 (.022) {3 Plcs}
4.50 (.177) Max.
0.40 (.016)
0.79 (.031)
1.65 (.065)
2.13 (.084)
19.81 (.780)
20.32 (.800)
1.01 (.040)
1.40 (.055)
2.21 (.087)
2.59 (.102)
2.87 (.113)
3.12 (.123)
5.45 (.215) BSC
2-Plcs.
Dimensions in Millimeters and (Inches)
0.020 (.001)
0.178 (.007)
2.67 (.105)
2.84 (.112)
1.27 (.050)
1.40 (.055)
1.22 (.048)
1.32 (.052)
1.98 (.078)
2.08 (.082)
5.45 (.215) BSC
{2 Plcs.}
Gate
Drain
Source
Source
Drain
Gate
Dimensions in Millimeters (Inches)
Microsemi's products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786
5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.
3.81 (.150)
4.06 (.160)
(Base of Lead)
Heat Sink (Drain)
and Leads
are Plated