part number: 10-00113 description: Cable, 2000 mm, 50-00010 locking dc plug to stripped/tinned leads, 18 AWG, UL2468 date: unit: page: rev: 05/28/09 mm 1 of 3 A Specifications: plug description (1) Ø2.1 x 5.5 x 30 ± 0.5, black insulator, P/N 50-00010 plug overmold (2) 30P, PVC, black cable description (3) UL2468, 0.16 x 41 strands, twin wire cable outer diameter 4.4 (2.2 x 2) ± 0.1 cable color black cable gauge AWG #18 cable length 2000 ± 50 twist tie (4) black, 89 ± 3 rated load 12 Vdc @ 5 A Notes: Function test: no open, no reversed polarity, no short circuit, no INT Hi-POT test: 600 Vac, 0.5 mA, 1 sec. RoHS compliant Mechanical drawing: Initial Date 29033 Avenue Sherman Ste 203 Valencia, CA 91355 tolerance X: ±0.5 mm .X: ±0.3 mm ph 661.702.0035 fx 661.702.0038 .XX: ±0.05 mm www.tensility.com part number: 10-00113 description: Cable, 2000 mm, 50-00010 locking dc plug to stripped/tinned leads, 18 AWG, UL2468 date: unit: page: rev: 05/28/09 mm 2 of 3 A Cable specifications: conductors gauge 18 AWG material brass copper cord size 41/0.16 BC jacket material F0068C 48PB (4026) color black diameter Ø4.4 (2.2 x 2) ± 0.10 electrical & physical properties rated voltage 300 V rated temperature 80 °C insulation resistance 0.76 (15.6 °C) mΩ / m min. resistance @ 20 °C 21.8 mΩ/m max spark test 5.0 KV material unaged aging test insulation tensile strength (kfg/mm min) 1.05 elongation (%min) 100 2 condition 113°C/168 h elongation (% unaged min) 65 tensile strength (% unaged min) 75 deformation (121± 1 °C x 1 hour) ≤50% cold bend (-10 ± 1 °C x 1 hour) OK heat shock (121 ± 1 °C x 1 hour) OK flame test VW-1 Cable cross section: conductor PVC insulation 29033 Avenue Sherman Ste 203 Valencia, CA 91355 ph 661.702.0035 fx 661.702.0038 www.tensility.com part number: 10-00113 description: Cable, 2000 mm, 50-00010 locking dc plug to stripped/tinned leads, 18 AWG, UL2468 date: unit: page: rev: 05/28/09 mm 3 of 3 A Revision notes: Rev Date Description A May 28, 2009 initial release Specification Approval Spec sign-off verifies that you have reviewed the entire specification, tested a sample of the product, and confirm that it meets your requirements. This specification reflects the part as it will be ordered. Orders will not be processed until the specification pages have been initialed and the approval page has been signed. This specification is confidential and is not to be transmitted without prior approval from Tensility. Signature Title Name Date 29033 Avenue Sherman Ste 203 Valencia, CA 91355 ph 661.702.0035 fx 661.702.0038 www.tensility.com