re.fm
77
y [ W
Q O O Q N R
P Q œ @ ˛ j œ @
ª S
P X “
2.6 GHz 75Ω RELAYS FOR
BROADCASTING INDUSTRY
20.2
.795
RE-RELAYS
FEATURES
11.2
.441
• Excellent high frequency characteristics (Impedance 75Ω)
8.9
.350
20.2
.795
11.2
.441
9.6
.378
mm inch
Frequency
V.S.W.R.
(Max.)
Insertion loss
(dB, Max.)
Isolation
(dB, Min.)
900MHz
2.6GHz
1.2
1.5
0.2
0.5
60
30
• Surface-mount terminal type also
available
SPECIFICATIONS
Characteristics
Contact
Arrangement
Contact material
Initial contact resistance
Contact rating
Rating
Contact carrying power
Max. switching voltage
Max. switching current
V.S.W.R.
High frequency
characteristics
Insertion loss
(Impedance
75Ω)
Isolation
Mechanical (at 180 cpm)
Expected life
(min. operations)
1W, 2.6GHz,
Impedance 75Ω,
V.S.W.R. & 1.5
Electrical
10mA 24V DC
(resistive load)
(at 20cpm)
1 Form C
Gold
Max. 100mΩ
1W
(at 2.6 GHz, Impedance
75 Ω, V.S.W.R. Max.1.5)
10mA 24V DC
(resistive load)
10W (at 2.6GHz,
Impedance 75 Ω,
V.S.W.R. Max.1.5)
30 V DC
0.5 A DC
Max. 1.2 (to 900MHz)
Max. 1.5 (to 2.6GHz)
Max. 0.2 (to 900MHz)
Max. 0.5 (to 2.6GHz)
Min. 60dB (to 900MHz)
Min. 30dB (to 2.6GHz)
106
TYPICAL APPLICATIONS
Broadcasting market
• Set Top Box (CS/BS tuner, CATV tuner)
• Multi-function TV
• Measuring instruments for broadcasting
500 Vrms
Ambient
temp.
Max. 10ms
Max. 5ms
Max. 60°C
Min. 500 m/s2{50 G}
Min. 1,000 m/s2{100 G}
10 to 55 Hz at double
amplitude of 3 mm
10 to 55 Hz at double
amplitude of 5 mm
–40°C to 60°C
–40°F to 140°F
Humidity
5 to 85% R.H.
Functional*7
Vibration resistance
Destructive
Conditions for operation,
transport and storage*8
(Not freezing and condensing
at low temperature)
Unit weight
Approx. 5 g .18 oz
Remarks
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as "Initial breakdown voltage" section.
*2 Detection current: 10mA
*3 Nominal operating voltage applied to the coil, excluding contact bounce time.
*4 By resistive method, nominal voltage applied to the coil: Contact carrying power:
10W, at 2.6GHz, Impedance 75Ω, V.S.W.R. & 1.5
*5 Half-wave pulse of sine wave: 11ms, detection time: 10µs.
6
* Half-wave pulse of sine wave: 6ms
*7 Detection time: 10µs
*8 Refer to 5. Conditions for operation, transport and storage mentioned in NOTES
3×105
3×105
Coil (at 20°C, 68°F)
Nominal operating power
Min. 100 MΩ (at 500 V DC)
500 Vrms
1,000 Vrms
Initial insulation resistance*1
Between open contacts
Initial
Between contact and coil
breakdown
2
Between contact and
voltage*
ground terminal
Operate time*3 (at 20°C)
Release time (without diode)*3 (at 20°C)
Temperature rise (at 20°C)*4
Functional*5
Shock resistance
Destructive*6
200 mW
ORDERING INFORMATION
Ex. ARE
Contact
arrangement
1: 1 Form C
1
Operating
function
3
Terminal shape
3: Single side Nil: Standard PC board
stable type
terminal
A: Surface-mount
terminal
Coil voltage
(DC)
03: 3 V
4H: 4.5 V
06: 6 V
09: 9 V
12: 12 V
24: 24 V
Packing style
Nil: Carton (PC board terminal)
Tube (Surface-mount
terminal)
Z: Tape and reel packing
(picked from 1/7 pin side)
Note: Tape and reel packing symbol “-Z” is not marked on the relay.
“X type tape and reel packing (picked from 8/9/10/11/12/13/14-pin side) is also availabe.
Suffix “X” instead of “Z”.
77
re.fm
78
y [ W
Q O O Q N R
U œ @
j œ @
ª X
S Q “
RE
TYPES AND COIL DATA (at 20°C 68°F)
• Packing of standard PC board terminal: 50 pcs. in an inner package (carton); 500 pcs. in an outer package
• Packing of surface-mount terminal: 25 pcs. in an inner package (tube); 200 pcs. in an outer package
400 pcs. in an inner package (tape and reel); 800 pcs. in an outer package
Standard
PC board
terminal
ARE1303
ARE134H
ARE1306
ARE1309
ARE1312
ARE1324
Surface-mount
terminal
ARE13A03
ARE13A4H
ARE13A06
ARE13A09
ARE13A12
ARE13A24
Nominal
voltage,
V DC
3
4.5
6
9
12
24
Pick-up voltage,
V DC (max.)
(initial)
2.25
3.375
4.5
6.75
9
18
Drop-out
voltage, V DC
(min.)(initial)
0.3
0.45
0.6
0.9
1.2
2.4
Coil resistance,
Ω (±10%)
45
101
180
405
720
2,880
Nominal
operating current,
mA (±10%)
66.7
44.4
33.3
22.2
16.7
8.3
Nominal operating power,
mW
200
200
200
200
200
200
Max. allowable
voltage, V DC
3.3
4.95
6.6
9.9
13.2
26.4
DIMENSIONS
mm inch
1. Standard PC board terminal
Schematic (Bottom view)
20.2
.795
Stand off
1
11.2
.441
7
14 13 12 11 10 9 8
Direction indication
NC
COM
NO
(Deenergized condition)
8.6
.339
3.0
.118
0.3
.012
2.54
.100
0.5
.020
0.3
.012
(1.49)
(.059)
7.62
.300
0.3
.012
(2.09)
(.082)
General tolerance: ±0.3 ±.012
2. Surface mount terminal
(0.7)
(.028)
20.2
.795
Schematic (Top view)
NC
13.2 ±0.5 11.2
.520 ±.020 .441
COM
NO
14 13 12 11 10 9 8
Direction indication
(1.3)
(.511)
1
7
(Deenergized condition)
0.3
.012
8.6
.339
0.3
.012
9.6
.378
0.3
.012
2.54
.100
0.5
.020
(1.49)
(.059)
7.62
.300
(2.09)
(.082)
General tolerance: ±0.3 ±.012
REFERENCE DATA
1. High frequency characteristics
(Standard PC board terminal)
• Insertion loss characteristics
• Isolation characteristics
0
0
1.9
0.1
1.8
0.2
1.7
1.6
1.5
COM-NO
1.4
0.5
0.8
COM-NC
3GHz
900MHz
Frequency
COM-NC
30
40
50
60
0.6
1.2
1
78
0.4
0.7
20
COM-NC
0.3
1.3
1.1
10
Isolation, dB
2.0
Insertion loss, dB
V.S.W.R.
• V.S.W.R. characteristics
COM-NO
70
COM-NO
80
0.9
90
1.0
100
3GHz
900MHz
Frequency
3GHz
900MHz
Frequency
RE
NOTES
1.0mm .039inch
B
A
(2) IR (infrared reflow) soldering method
A:
B:
T5
T4
T3
T2
T1
t1
t2 t3 t4 t5
T1=150°C 302°F
T2=160°C 320°F
T3=183°C 361°F
T4=245°C 473°F
T5=270°C 518°F
t2 - t1 = 80 to 120 s
t5 - t3 = 30 to 40 s
t4 = 170 to 190 s
Temperature rise of relay itself may vary
according to the mounting level or the
heating method of reflow equipment.
Therefore, please set the temperature of
soldering portion of relay terminal and the
top surface of the relay case not to exceed
the above mentioned soldering condition.
It is recommended to check the temperature rise of each portion under actual
mounting condition before use.
4. Packing style
1) Tape dimensions
+0.1
+.004
.059−0
dia.
1.5−0
Relay polarity bar
5. Conditions for operation, transport
and storage
1) Ambient temperature, humidity, and atmospheric pressure during usage, transport, and storage of the relay:
(1) Temperature:
–40 to +60°C –40 to +140°F
(2) Humidity: 5 to 85% RH
(Avoid freezing and condensation.)
The humidity range varies with the temperature. Use within the range indicated
in the graph below.
(3) Atmospheric pressure: 86 to 106 kPa
Temperature and humidity range for usage, transport, and storage:
Humidity, %R.H.
,,,,,,,
,,,,,,,
,,,,,,,
,,,,,,,
,,,,,,,
1. Coil operating power
Pure DC current should be applied to the
coil. The wave form should be rectangular.
If it includes ripple, the ripple factor should
be less than 5%.
However, check it with the actual circuit
since the characteristics may be slightly
different.
2. Cleaning
For automatic cleaning, the boiling method is recommended. Avoid ultrasonic
cleaning which subjects the relays to high
frequency vibrations, which may cause
the contacts to stick.
It is recommended that alcoholic solvents
be used.
3. Soldering
1) The soldering shall be performed under
following condition.
Max. 260°C 500°F 10s
Max. 350°C 662°F 3s
The affect of the PCB on the relay will differ depending on the type of PCB used.
Please verify the type of PCB to be used.
Soldering time: within 5s
2) In case of automatic soldering, the following conditions should be observed
(Surface-mount terminal)
(1) Position of measuring temperature
4
.157
1.75
.069
2.0±0.15
.079±.006
20.2 44
±.012
20.75.795 1.732
.817
40.4
1.591
13.85
.545
+0.2
10.6−0.3
+.008
.417−.012
2) Dimensions of plastic reel
A: Surface of PC board where relay is mounted.
B: Above the PC board surface.
21±0.8±.031
dia.
.827
dia.
80±0.1
3.150±.004
±0.2
13 dia.
.512±.008 dia.
2.0±0.5
.079±.020
+0.2
44.4−0
+.008
1.748−0
Max. 50.5
1.988
(Avoid freezing
when used at
temperatures
lower than
0°C32°F)
5
–40
–40
(Avoid
condensation
when used at
temperatures
higher than
0°C32°F)
0
+60
+32
+140
Temperature, °C °F
0.4
.016
±0.3
1.7
.067
R0.75
RE Relay 20.0
.030
.787
1.5 .059
Tape coming out direction
85
Tolerance range
380±0.2 ±.008
14.961
2) Condensation
Condensation forms when there is a sudden change in temperature under high
temperature and high humidity conditions.
Condensation will cause deterioration of
the relay insulation.
3) Freezing
Condensation or other moisture may
freeze on the relay when the temperature
is lower than 0°C 32°F. This causes problems such as sticking of movable parts or
operational time lags.
4) Low temperature, low humidity environments
The plastic becomes brittle if the relay is
exposed to a low temperature, low humidity environment for long periods of time.
For Cautions for Use, see Relay Technical Information (Page 48 to 76).
3/7/2002
79
All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.
Go To Online Catalog