AZ100LVEL11 www.azmicrotek.com PECL/ECL 1:2 Differential Fanout Buffer FEATURES DESCRIPTION • • • The AZ100LVEL11 is a differential 1:2 fanout gate. The device is functionally similar to the E111 device but with higher performance capabilities. Having within-device skews and output transition times significantly improved over the E111, the AZ100LVEL11 is ideally suited for those applications that require the ultimate in AC performance. • The differential inputs of the AZ100LVEL11 employ clamping circuitry to maintain stability under open input conditions. If the inputs are left open, the Q outputs will go LOW. The AZ100LVEL11 is a direct replacement for the ON Semi MC100LVEL11 and MC100EL11 APPLICATIONS • BLOCK DIAGRAM 265ps propagation delay 5ps skew between outputs Internal input pull-down resistors Direct replace for ON Semi MC100LVEL11 and MC100EL11 General applications PACKAGE AVAILABILITY • • • • Order Number MLP8 SOIC8 MSOP8 Green/RoHS Compliant/Pb-Free Package Marking 1 AZ100LVEL11NG MLP8 L1G2 AZ100LVEL11D+1 SOIC8 AZM100+LVEL112 AZ100LVEL11TG1 MSOP8 AZHGLV112 1 Tape & Reel - Add 'R1' at end of order number for 7in (1k parts), 'R2' (2.5k) for 13in 2 See www.azmicrotek.com for date code format www.azmicrotek.com +1-480-962-5881 Request a Sample 1630 S Stapley Dr, Suite 127 Mesa, AZ 85204 USA May 2012, Rev 2.0 Arizona Microtek, Inc. AZ100LVEL11 ECL/PECL 1:2 Differential Fanout Buffer PIN DESCRIPTION AND CONFIGURATION Table 1 - Pin Description Pin 1 Name Q0 Type Input Function Data Input 2 Q0 Input Data Input 3 Q1 Input Data Input 4 Q1 Output Data Input 5 VEE Power Negative Supply 6 D Output Data Output 7 8 D VCC Output Power Data Output Positive Supply MLP8 Q0 1 8 VCC Q0 1 Q0 7 D Q0 2 2 8 VCC 7 D SOIC8 MSOP8 Q1 3 6 D Q1 3 6 D Q1 4 5 VEE Q1 4 5 VEE Figure 1 - Pin Configuration for MLP8 & SOIC8/MSOP8 For MLP8, leave center bottom pad open or connect to VEE www.azmicrotek.com +1-480-962-5881 Request a Sample 2 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ100LVEL11 ECL/PECL 1:2 Differential Fanout Buffer ENGINEERING NOTES 800 700 Vout pp (mV) 600 500 400 300 200 100 0 0 200 400 600 800 1000 1200 1400 1600 1800 2000 Frequency (MHz) Figure 2 - Typical Output Swing PERFORMANCE DATA Table 2 – Absolute Maximum Ratings Symbol Characteristic Condition Rating Unit VCC PECL Power Supply VEE = 0V 0 to +8.0 V VI PECL Input Voltage VEE = 0V 0 to +6.0 V VEE ECL Power Supply VCC = 0V -8.0 to 0 V VI ECL Input Voltage VCC = 0V -6.0 to 0 V IOUT Output Current Continuous 50 Surge 100 TA Operating Temperature Range -40 to +85 °C mA TSTG Storage Temperature Range -65 to +150 °C ESDHBM Human Body Model 2500 V ESDMM Machine Model 200 V ESDCDM Charged Device Model 2500 V www.azmicrotek.com +1-480-962-5881 Request a Sample 3 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ100LVEL11 ECL/PECL 1:2 Differential Fanout Buffer Table 3 - ECL DC Characteristics ECL DC Characteristics (VEE = -3.0V to -5.5V, VCC = GND) Symbol -40 °C Characteristic 0 °C 25 °C 85 °C Unit Min Typ Max Min Typ Max Min Typ Max Min Typ Max -1085 -1005 -880 -1025 -955 -880 -1025 -955 -880 -1025 -955 -880 mV -1830 -1695 -1555 -1810 -1705 -1620 -1810 -1705 -1620 -1810 -1705 -1620 mV VOH Output HIGH Voltage1 VOL Output LOW Voltage 1 VIH Input HIGH Voltage -1165 -880 -1165 -880 -1165 -880 -1165 -880 mV VIL Input LOW Voltage -1810 -1475 -1810 -1475 -1810 -1475 -1810 -1475 mV IIL Input LOW Current -150 IIH Input HIGH Current 150 µA µA IEE Power Supply Current 34 mA 1 -150 -150 150 22 -150 150 31 23 150 31 24 31 28 Each output is terminated through a 50Ω resistor to VCC -2V Table 4 - LVPECL DC Characteristics LVPECL DC Characteristics (VEE = GND, VCC = +3.3V) Symbol -40 °C Characteristic 0 °C 25 °C 85 °C Unit Min Typ Max Min Typ Max Min Typ Max Min Typ Max VOH Output HIGH Voltage1 2215 2295 2420 2275 2345 2420 2275 2345 2420 2275 2345 2420 mV VOL Output LOW Voltage1 1470 1605 1745 1490 1595 1680 1490 1595 1680 1490 1595 1680 mV VIH 2135 2420 2135 2420 2135 2420 2135 2420 mV VIL Input HIGH Voltage Input LOW Voltage 1490 1825 1490 1825 1490 1825 1490 1825 mV IIL Input LOW Current -150 IIH Input HIGH Current 150 µA µA IEE Power Supply Current 34 mA 1 -150 -150 150 22 -150 150 31 23 150 31 24 31 28 Each output is terminated through a 50Ω resistor to VCC -2V Table 5 - PECL DC Characteristics PECL DC Characteristics (VEE = GND, VCC = +5.0V) Symbol -40 °C Characteristic 0 °C 25 °C 85 °C Unit Min Typ Max Min Typ Max Min Typ Max Min Typ Max 3915 3995 4120 3975 4045 4120 3975 4045 4120 3975 4045 4120 mV 3170 3305 3445 3190 3295 3380 3190 3295 3380 3190 3295 3380 mV VOH Output HIGH Voltage1 VOL Output LOW Voltage 1 VIH Input HIGH Voltage 3835 4120 3835 4120 3835 4120 3835 4120 mV VIL Input LOW Voltage 3190 3525 3190 3525 3190 3525 3190 3525 mV IIL Input LOW Current -150 IIH Input HIGH Current 150 µA µA IEE Power Supply Current 34 mA 1 -150 -150 150 22 -150 150 31 23 31 150 24 31 28 Each output is terminated through a 50Ω resistor to VCC -2V www.azmicrotek.com +1-480-962-5881 Request a Sample 4 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ100LVEL11 ECL/PECL 1:2 Differential Fanout Buffer Table 6 - AC Characteristics AC Characteristics (VEE = -3.0V to -5.5V, VCC = GND or VEE = GND, VCC = +3.0V to +5.0V) -40 °C Symbol Characteristic tPLH/tPHL Propagation Delay to Output Unit Max Min Typ Max Min Typ Max Min Typ Max 135 260 335 185 260 335 190 265 340 215 310 365 ps 5 5 20 5 20 5 20 ps 5 5 20 5 20 5 20 ps Within Device Skew VPP 85 °C Typ 2 3 25 °C Min Duty Cycle Skew1 tskew 0 °C Minimum Input Swing 150 VCMR Common Mode Range4 VEE + 1.2 VCC 0.2 VEE + 1.2 VCC 0.2 VEE + 1.2 VCC 0.2 VEE + 1.2 VCC 0.2 V tr/tf Output Rise/Fall Times Q (20%-80%) 100 260 100 260 100 260 100 260 ps 150 150 1 Within-device skew defined as identical transitions on similar paths through a device. 2 Duty cycle skew is the difference between a tPLH and tPHL propagation delay through a device. 3 4 mV 150 VPP is the minimum peak-to-peak differential input swing for which AC parameters guaranteed. The device has a DC gain of 40. The VCMR range is referenced to the most positive side of the differential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies between VPP (min) and 1V. www.azmicrotek.com +1-480-962-5881 Request a Sample 5 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ100LVEL11 ECL/PECL 1:2 Differential Fanout Buffer PACKAGE DIAGRAM MLP8 Green/RoHS compliant/Pb-Free MSL=1 www.azmicrotek.com +1-480-962-5881 Request a Sample 6 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ100LVEL11 ECL/PECL 1:2 Differential Fanout Buffer PACKAGE DIAGRAM SOIC8 Green/RoHS compliant/Pb-Free MSL=1 www.azmicrotek.com +1-480-962-5881 Request a Sample 7 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ100LVEL11 ECL/PECL 1:2 Differential Fanout Buffer PACKAGE DIAGRAM MSOP8 Green/RoHS compliant/Pb-Free MSL=1 Arizona Microtek, Inc. reserves the right to change circuitry and specifications at any time without prior notice. Arizona Microtek, Inc. makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Arizona Microtek, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Arizona Microtek, Inc. does not convey any license rights nor the rights of others. Arizona Microtek, Inc. products are not designed, intended or authorized for use as components in systems intended to support or sustain life, or for any other application in which the failure of the Arizona Microtek, Inc. product could create a situation where personal injury or death may occur. Should Buyer purchase or use Arizona Microtek, Inc. products for any such unintended or unauthorized application, Buyer shall indemnify and hold Arizona Microtek, Inc. and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Arizona Microtek, Inc. was negligent regarding the design or manufacture of the part. www.azmicrotek.com +1-480-962-5881 Request a Sample 8 May 2012, Rev 2.0