Film Capacitors MKP 2/4 pins Switching – DC link Series/Type: B32674, B32676, B32678 Date: June 2006 Version: 1 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color to "white" (or invisible). This ensures that the table disappears for the customer PDF. To update the data sheet, click on the symbol "Preview" and then "Close". Please do not alter the header or footer when copying the content. Identification/Classification 1: (header 1 + top left header bar) Film capacitors Identification/Classification 2: (header 2 + bottom left header bar) MKP 2/4 pins Ordering code: (top right header bar) B32674, B32676, B32678 Series/Type: (top right header bar) Switching – DC link Preliminary data (optional): (if necessary) Department: Date: 2006-06-07 © EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Film capacitors MKP 2/4 pins B32674, B32676, B32678 Switching – DC link Please refer to typical waveforms on page 5. Note: Not for across the line applications! Only unidirectional AC voltage! 2006-06-07 Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 7 Film capacitors MKP 2/4 pins B32674, B32676, B32678 Switching – DC link Please refer to typical waveforms on page 5. Note: Not for across the line applications! Only unidirectional AC voltage! 2006-06-07 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 7 Film capacitors MKP 2/4 pins B32674, B32676, B32678 Switching – DC link Please refer to typical waveforms on page 5. Note: Not for across the line applications! Only unidirectional AC voltage! 2006-06-07 Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 7 Film capacitors MKP 2/4 pins B32674, B32676, B32678 Switching – DC link Typical waveforms: UPK UN (V) = maximum operating peak of voltage of either polarity but of a non-reversing waveform, for which the capacitor has been designed, for continuous operation. ûac = 0.1 · UN (DC) UPK (V) = this is the maximum permissible recurrent voltage that may appear for max. 1% of the period. 2006-06-07 Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 7 Cautions and warnings Page 6 of 7 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, EPCOS-JONES, Baoke, CeraDiode, CSSP, MLSC, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 7 of 7