EPCOS B41820A6334M00

Single-Ended Capacitors
B41820
Low Profile – 85 °C
B41820
General purpose grade capacitors
Ultra-miniaturized dimensions
Applications
■ General-purpose applications,
mainly used in compact electronic equipments
Features
■ Ultra-miniaturized dimensions
■ Low profile
KAL0707-F
Construction
■
■
■
■
■
Dimension 4 × 5 mm
Charge-discharge proof, polar
Aluminum case with insulating sleeve
Minus pole marking on the insulating sleeve
Stand off rubber seal
Delivery mode
■ Bulk
■ Taped, Ammo pack
Refer to page 503 for further details and ordering example.
386 10/02
B41820
Low Profile – 85°C
Specifications and characteristics in brief
Rated voltage UR
6,3 … 50 VDC
Surge voltage US
Rated capacitance CR
1,15 · UR
0,1 … 22 µF
Capacitance tolerance
Useful life
± 20 %
85 °C; UR; I~R
40°C; UR; 1,3 · I~R
> 1 000 h
> 40 000 h
M
Requirements:
∆C/C
tan δ
IL
≤ ± 50 % of initial value
≤ 3 times initial specified limit
≤ initial specified limit
Failure percentage: ≤ 3 %
Failure rate:
≤ 100 fit (≤ 100 · 10 –9/h)
(for definiton “fit”, refer to chapter “Quality”, page 62)
Post test requirements:
Voltage endurance test
∆C/C ≤ ± 25 % of initial value
tan δ ≤ 2 times initial specified limit
IL
≤ initial specified limit
To IEC 60068-2-6, test Fc:
displacement amplitude 0,75 mm, frequency range 10 … 2000 Hz,
acceleration max. 10 g, duration 3 × 2 h
85°C; UR
1 000 h
Vibration resistance
IEC climatic category
To IEC 60068-1:
40/085/56 (– 40°C/+ 85°C/56 days damp heat test)
Sectional specification
IEC 60384-4
Dimensional drawing
d max.
d
+
øb
Stand-off rubber seal
a
max.
Minus pole
marking
15 min.
5 min.
KAL0812-M-E
Dimensions and weight
Dimensions (mm)
d×l
dmax × lmax
a ± 0,5
b
g
Approx. weight
4×5
4,5 × 6
1,5
0,45 ± 0,05
0,3
387 10/02
B41820
Low Profile – 85°C
Overview of available types
UR (VDC)
6,3
CR (µF)
Case dimensions d × l (mm)
10
16
35
50
0,10
4×5
0,22
0,33
4×5
4×5
0,47
4×5
1,0
4×5
2,2
3,3
4×5
4×5
4×5
4×5
4,7
10
4×5
4×5
15
22
4×5
Other capacitance and voltage ratings are available upon request.
Technical data and ordering codes
UR
VDC
CR
120 Hz
20 °C
µF
Case
dimensions
d×l
mm
IL, max
5 min
20 °C
µA
tan δmax ESRmax
120 Hz 120 Hz
20 °C
20 °C
Ω
I ~R
120 Hz
85 °C
mA
Ordering code 1)
22
4×5
3,0
0,22
14
22
B41820A2226M00*
10
15
4×5
3,0
0,20
18
20
B41820A3156M00*
16
10
6,3
4×5
3,0
0,17
23
18
B41820A4106M00*
35
3,3
4,7
4×5
4×5
3,0
3,0
0,12
0,12
48
34
12
14
B41820A7335M00*
B41820A7475M00*
50
0,10
0,22
4×5
4×5
3,0
3,0
0,10
0,10
1 326
603
1,0
2,0
0,33
4×5
3,0
0,10
402
4,0
B41820A6334M00*
0,47
4×5
3,0
0,10
282
5,0
B41820A6474M00*
1,0
2,2
4×5
4×5
3,0
3,0
0,10
0,10
133
60
7,0
11
B41820A6105M00*
B41820A6225M00*
3,3
4×5
3,0
0,10
40
13
B41820A6335M00*
B41820A6104M00*
B41820A6224M00*
Preferred types
1) * = “0” for bulk version.
For taping versions, other lead configurations and packing information see page 503.
388 10/02
B41820
Low Profile – 85°C
Equivalent series resistance ESR
at f = 120 Hz versus temperature T
Typical behavior
Frequency factor of permissible
ripple current I~
versus frequency f
KAL0739-I
2,6
B41820
Ι ~f
Ι ~120 Hz
KAL0740-L
12
B41820
ESR T
ESR 25 ˚C
35 V, 50 V
2,0
1,8
8
1,6
1,4
6
1,2
6,3 V, 10 V, 16 V
1,0
4
0,8
16 V
50 V
0,6
2
0,4
0,2
0 1
10
10 2
10 3
0_
Hz 10 4
f
Impedance Z at f = 10 kHz
versus temperature T
Typical behavior
_ 20
0
20
40
60
˚C 100
T
Impedance Z
versus frequency f
Typical behavior at 20 °C
KAL0741-U
10 3
KAL0742-3
10 4
B41820
Ω
40
B41820
Ω
Z
Z
10
10 3
0,47 µF/50 V
10 µF/16 V
2
0,47 µF/50 V
10 µF/16 V
10 2
10 1
10 1
10 0
_ 40
_ 20
0
20
40
60
˚C 100
T
10 0
10 1
389 10/02
10 2
10 3
10 4
10 5 Hz 10 6
f
B41820
Low Profile – 85°C
Impedance Z
versus frequency f and temperature T
for 0,47 µF/50 V
Typical behavior
Impedance Z
versus frequency f and temperature T
for 10 µF/16 V
Typical behavior at 20 °C
KAL0743-B
10 4
Ω
Z
KAL0744-J
10 3
B41820
B41820
Ω
Z
10 3
_ 40 ˚C
10 2
_ 25 ˚C
_ 40 ˚C
10 2
0 ˚C
10 1
20 ˚C
_ 25 ˚C
85 ˚C
0 ˚C
10 1
10 0
20 ˚C
85 ˚C
10 0
10 1
10 2
10 3
10 4
10 5 Hz 10 6
f
10
_1
10 1
390 10/02
10 2
10 3
10 4
10 5 Hz 10 6
f
Herausgegeben von EPCOS AG
Unternehmenskommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet.
Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG
oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without
EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics
Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on the type in question please
also contact one of our Sales Offices.