AEC-C_B41231_B43231.book Seite 1 Mittwoch, 16. April 2008 2:27 14 Aluminum electrolytic capacitors Alu-X product lines Snap-in capacitors Series/Type: Data Sheet Date: B41231, B43231 April 2008 © EPCOS AG 2008. Reproduction, publication and dissemination of this publication and the information contained therein without EPCOS’ prior express consent is prohibited. AEC-C_B41231_B43231.book Seite 2 Mittwoch, 16. April 2008 2:27 14 Snap-in capacitors Standard series – 85 °C Snap-in capacitors Standard series – 85 °C B41231, B43231 B41231, B43231 General-purpose grade capacitors Applications ■ Switch-mode power supplies in industrial and entertainment electronics Features ■ High ripple current capability ■ RoHS-compatible ■ Load life of 2000 h at 85 °C Construction ■ ■ ■ ■ Aluminum case, fully insulated Snap-in solder pins to hold component in place on PC-board Minus pole marking on the insulating sleeve Case with safety vent Please read Cautions and warnings and Important notes at the end of this document. 2 04/08 AEC-C_B41231_B43231.book Seite 3 Mittwoch, 16. April 2008 2:27 14 Snap-in capacitors Standard series – 85 °C B41231, B43231 Specifications and characteristics in brief Rated voltage VR 10 … 500 V DC Operating temperature range VR ≤ 250 V DC: –40 °C … +85 °C VR ≥ 315 V DC: –25 °C … +85 °C Rated capacitance CR 56 … 68000 µF (20 °C, 120 Hz) Capacitance tolerance ±20% Load life (85 °C, VR, IAC,R) M 2000 h Requirements: ∆C/C ≤ ±20% of initial value tan δ ≤ 2 times initial specified limit Ileak ≤ initial specified limit Leakage current Ileak ⎛ CR ⋅ V ------R-⎞ (20 °C, after 5 minutes) I leak ≤ 0.02 µA ⋅ ⎝ ------µF V ⎠ Dissipation factor (max.) (20 °C, 120 Hz) VR (V DC) 10 16 25 tan δ 0.50 0.50 0.40 0.40 0.30 0.25 0.20 0.15 0.12 Low temperature stability (impedance ratio) (120 Hz) VR (V DC) 10 16 ... 160 200 ... 250 315 ... 400 450 ... 500 Z ( – 25 °C ) --------------------------Z ( +20 °C ) 5 4 7 8 8 Z ( – 40 °C ) --------------------------Z ( +20 °C ) 18 15 12 – – Shelf life After storage for 1000 h at 85 °C, the capacitors shall meet the requirement of load life test after reforming process. After test: VR to be applied for 30 minutes, 24 to 48 hours before measurement. Frequency multiplier for rated ripple current ≤50 V 35 50 63 80 100 160 ... 250 ... 450 ... 200 400 500 0.15 50 Hz 120 Hz 1 kHz 10 kHz 20 kHz 0.95 1.00 1.10 1.15 1.15 63 ... 100 V 0.95 1.00 1.16 1.30 1.33 ≥160 V 0.90 1.00 1.20 1.50 1.55 Temperature multiplier for rated ripple current <160 V +40 °C +55 °C +70 °C +85 °C 2.1 2.1 1.5 1.0 ≥160 V 1.7 1.5 1.3 1.0 Please read Cautions and warnings and Important notes at the end of this document. 3 04/08 0.20 AEC-C_B41231_B43231.book Seite 4 Mittwoch, 16. April 2008 2:27 14 Snap-in capacitors Standard series – 85 °C B41231, B43231 Dimensional drawing 41 ± ˚ 25˚ d+1 max. Minus pole marking l+2 max. Base 6.0±1* Insulating sleeve 0.8 0.8±0.1 ±0. 1 1.5±0.1 Safety vent on the base Mounting holes ø2±0.1 .2 ±0 10 KAL1095-Q-E * = Shorter terminal (4.0 ± 0.5) is also available upon request. Please read Cautions and warnings and Important notes at the end of this document. 4 04/08 AEC-C_B41231_B43231.book Seite 5 Mittwoch, 16. April 2008 2:27 14 Snap-in capacitors Standard series – 85 °C B41231, B43231 Overview of available types B41231 VR (V DC) 10 16 25 35 Case dimensions d × l (mm) CR (µF) 22 × 30 25.4 × 25 4700 5600 22 × 25 22 × 35 25.4 × 30 6800 22 × 30 25.4 × 25 22 × 40 25.4 × 30 30 × 25 8200 22 × 35 25.4 × 30 22 × 45 25.4 × 35 30 × 30 × 25 22 × 40 25.4 × 30 22 × 50 25.4 × 40 30 × 30 10000 22 12000 22 × 25 22 × 30 25.4 × 25 22 × 45 25.4 × 35 30 × 25 25.4 × 45 30 × 35 35 × 30 15000 22 × 30 25.4 × 25 22 × 35 25.4 × 30 30 × 25 22 × 50 25.4 × 40 30 × 30 30 35 × 40 × 35 18000 22 × 35 25.4 × 25 22 × 40 25.4 × 35 30 × 30 25.4 × 45 30 × 35 30 35 × 45 × 40 22000 22 × 40 25.4 × 30 30 × 25 22 × 50 25.4 × 40 30 × 30 30 35 × 35 × 30 35 × 45 27000 22 × 45 25.4 × 35 30 × 30 25.4 × 45 30 × 35 35 × 25 30 35 × 45 × 35 33000 22 25.4 30 35 × 50 × 40 × 30 × 25 30 35 × 40 × 30 30 35 × 50 × 40 39000 25.4 × 45 30 × 35 35 × 30 30 35 × 45 × 35 35 × 45 47000 25.4 × 50 30 × 40 35 × 30 30 35 × 50 × 40 56000 30 35 × 45 × 35 35 × 45 68000 35 × 40 35 × 50 Please read Cautions and warnings and Important notes at the end of this document. 5 04/08 AEC-C_B41231_B43231.book Seite 6 Mittwoch, 16. April 2008 2:27 14 Snap-in capacitors Standard series – 85 °C B41231, B43231 Overview of available types B41231 VR (V DC) 50 63 80 100 Case dimensions d × l (mm) CR (µF) 1200 22 × 25 22 × 30 25.4 × 25 1500 22 × 30 22 × 35 25.4 × 30 30 × 25 1800 22 × 25 22 × 30 25.4 × 25 22 × 40 25.4 × 35 30 × 30 2200 22 × 30 25.4 × 25 22 × 35 25.4 × 30 30 × 25 22 × 45 25.4 × 40 30 × 30 2700 22 × 35 25.4 × 30 22 × 40 25.4 × 35 30 × 30 25.4 × 45 30 × 35 35 × 30 22 × 35 25.4 × 30 30 × 25 22 × 45 25.4 × 40 30 × 30 25.4 × 50 30 × 40 35 × 35 22 × 40 25.4 × 35 30 × 30 22 × 50 25.4 × 45 30 × 35 30 35 × 45 × 35 × 50 × 40 × 35 × 30 25.4 × 50 30 × 40 35 × 30 30 35 × 50 × 40 35 × 45 3300 22 × 30 25.4 × 25 3900 4700 22 25.4 30 35 × 40 × 35 × 25 × 25 22 25.4 30 35 5600 22 25.4 30 35 × 45 × 40 × 30 × 25 25.4 × 45 30 × 35 35 × 30 30 35 × 45 × 35 6800 22 25.4 30 35 × 50 × 45 × 35 × 30 25.4 × 50 30 × 40 35 × 30 35 × 40 8200 25.4 × 50 30 × 40 35 × 30 30 35 × 45 × 35 35 × 45 10000 30 35 × 45 × 35 30 35 × 50 × 40 12000 30 35 × 50 × 40 35 × 45 15000 35 × 45 18000 35 × 50 Please read Cautions and warnings and Important notes at the end of this document. 6 04/08 AEC-C_B41231_B43231.book Seite 7 Mittwoch, 16. April 2008 2:27 14 Snap-in capacitors Standard series – 85 °C B41231, B43231 Overview of available types B43231 VR (V DC) 160 200 250 315 Case dimensions d × l (mm) CR (µF) × 20 100 22 120 22 × 25 25.4 × 20 22 × 25 25.4 × 20 22 × 30 25.4 × 25 30 × 20 × 20 22 × 25 25.4 × 20 22 25.4 30 35 × 35 × 30 × 25 × 20 150 180 22 220 22 × 20 22 × 25 25.4 × 20 22 × 25 25.4 × 25 30 × 20 22 25.4 30 35 × 40 × 30 × 25 × 20 270 22 × 25 25.4 × 20 22 × 25 25.4 × 25 30 × 20 22 × 30 25.4 × 25 30 × 20 22 25.4 30 35 × 45 × 35 × 30 × 25 330 22 × 25 25.4 × 20 22 × 30 25.4 × 25 30 × 20 22 25.4 30 35 × 35 × 30 × 25 × 20 22 25.4 30 35 × 50 × 40 × 35 × 30 390 22 × 25 25.4 × 25 30 × 20 22 25.4 30 35 × 30 × 25 × 25 × 20 22 25.4 30 35 × 40 × 30 × 25 × 20 25.4 × 45 30 × 35 35 × 30 470 22 × 30 25.4 × 25 30 × 20 22 25.4 30 35 × 35 × 30 × 25 × 20 22 25.4 30 35 × 45 × 35 × 30 × 25 35 30 × 35 × 40 560 22 25.4 30 35 × 35 × 30 × 25 × 20 22 25.4 30 35 × 40 × 35 × 25 × 20 22 25.4 30 35 × 50 × 40 × 30 × 25 35 × 40 680 22 25.4 30 35 × 40 × 30 × 25 × 20 22 25.4 30 35 × 45 × 40 × 30 × 25 25.4 × 45 30 × 35 35 × 30 35 × 45 820 22 25.4 30 35 × 45 × 35 × 30 × 25 22 25.4 30 35 × 50 × 45 × 35 × 30 30 35 × 40 × 35 35 × 50 Please read Cautions and warnings and Important notes at the end of this document. 7 04/08 AEC-C_B41231_B43231.book Seite 8 Mittwoch, 16. April 2008 2:27 14 Snap-in capacitors Standard series – 85 °C B41231, B43231 Overview of available types B43231 VR (V DC) 160 200 250 Case dimensions d × l (mm) CR (µF) 1000 22 25.4 30 35 × 50 × 40 × 30 × 25 30 35 × 40 × 30 30 35 × 45 × 40 1200 25.4 × 45 30 × 35 35 × 30 30 35 × 45 × 35 35 × 45 1500 30 35 × 40 × 35 30 35 × 50 × 40 35 × 50 1800 35 × 40 35 × 45 Please read Cautions and warnings and Important notes at the end of this document. 8 04/08 315 AEC-C_B41231_B43231.book Seite 9 Mittwoch, 16. April 2008 2:27 14 Snap-in capacitors Standard series – 85 °C B41231, B43231 Overview of available types B43231 VR (V DC) 350 400 450 500 Case dimensions d × l (mm) CR (µF) 56 22 × 20 × 20 22 × 25 25.4 × 20 22 × 20 22 × 25 25.4 × 20 22 × 30 25.4 × 25 30 × 20 22 × 35 25.4 × 30 100 22 × 25 25.4 × 20 22 × 30 25.4 × 25 30 × 20 22 25.4 30 35 × 35 × 30 × 25 × 20 22 × 40 25.4 × 35 120 22 × 30 25.4 × 25 30 × 20 22 × 30 25.4 × 25 30 × 20 22 25.4 30 35 × 40 × 35 × 25 × 20 25.4 × 40 150 22 × 35 25.4 × 30 30 × 20 22 25.4 30 35 × 35 × 30 × 25 × 20 22 25.4 30 35 × 50 × 40 × 30 × 25 30 × 35 180 22 25.4 30 35 × 40 × 35 × 25 × 20 22 25.4 30 35 × 40 × 35 × 25 × 25 25.4 × 45 30 × 35 35 × 25 30 × 40 220 22 25.4 30 35 × 45 × 35 × 30 × 25 22 25.4 30 35 × 45 × 40 × 30 × 25 25.4 × 50 30 × 40 35 × 30 30 × 45 270 25.4 × 45 30 × 35 35 × 25 25.4 × 45 30 × 35 35 × 30 30 35 × 45 × 35 35 × 45 330 25.4 × 50 30 × 40 35 × 30 25.4 × 50 30 × 40 35 × 30 30 35 × 50 × 40 35 × 50 390 30 35 × 45 × 35 30 35 × 45 × 35 35 × 45 470 30 35 × 50 × 40 30 35 × 50 × 40 35 × 50 35 × 45 68 82 22 22 560 35 × 45 680 35 × 50 Please read Cautions and warnings and Important notes at the end of this document. 9 04/08 × 30 AEC-C_B41231_B43231.book Seite 10 Mittwoch, 16. April 2008 2:27 14 Snap-in capacitors Standard series – 85 °C B41231, B43231 Technical data and ordering codes B41231 VR V DC CR 120 Hz 20 °C µF IAC,R 120 Hz 85 °C A Case dimensions d×l mm Ordering code 10 12000 15000 15000 18000 18000 22000 22000 22000 27000 27000 27000 33000 33000 33000 33000 39000 39000 39000 47000 47000 47000 56000 56000 68000 22 22 25.4 22 25.4 22 25.4 30 22 25.4 30 22 25.4 30 35 25.4 30 35 25.4 30 35 30 35 35 × 25 × 30 × 25 × 35 × 25 × 40 × 30 × 25 × 45 × 35 × 30 × 50 × 40 × 30 × 25 × 45 × 35 × 30 × 50 × 40 × 30 × 45 × 35 × 40 3.31 3.82 3.39 4.28 4.17 4.79 4.71 4.83 5.30 5.26 5.41 5.82 5.81 5.69 5.81 6.31 6.22 6.38 6.83 6.78 6.62 7.31 7.18 7.76 B41231A3129M000 B41231A3159M000 B41231B3159M000 B41231A3189M000 B41231B3189M000 B41231A3229M000 B41231B3229M000 B41231C3229M000 B41231A3279M000 B41231B3279M000 B41231C3279M000 B41231A3339M000 B41231B3339M000 B41231C3339M000 B41231D3339M000 B41231A3399M000 B41231B3399M000 B41231C3399M000 B41231A3479M000 B41231B3479M000 B41231C3479M000 B41231A3569M000 B41231B3569M000 B41231A3689M000 16 10000 12000 12000 15000 15000 15000 18000 18000 18000 22000 22000 22000 27000 27000 27000 33000 33000 39000 22 22 25.4 22 25.4 30 22 25.4 30 22 25.4 30 25.4 30 35 30 35 30 × 25 × 30 × 25 × 35 × 30 × 25 × 40 × 35 × 30 × 50 × 40 × 30 × 45 × 35 × 25 × 40 × 30 × 45 3.32 3.55 3.89 4.29 4.45 4.56 4.77 4.96 5.10 5.51 5.51 5.39 6.06 5.98 5.80 6.56 6.41 7.08 B41231A4109M000 B41231A4129M000 B41231B4129M000 B41231A4159M000 B41231B4159M000 B41231C4159M000 B41231A4189M000 B41231B4189M000 B41231C4189M000 B41231A4229M000 B41231B4229M000 B41231C4229M000 B41231A4279M000 B41231B4279M000 B41231C4279M000 B41231A4339M000 B41231B4339M000 B41231A4399M000 Please read Cautions and warnings and Important notes at the end of this document. 10 04/08 AEC-C_B41231_B43231.book Seite 11 Mittwoch, 16. April 2008 2:27 14 Snap-in capacitors Standard series – 85 °C B41231, B43231 Technical data and ordering codes B41231 VR V DC CR 120 Hz 20 °C µF IAC,R 120 Hz 85 °C A Case dimensions d×l mm Ordering code 16 39000 47000 47000 56000 68000 35 30 35 35 35 × 35 × 50 × 40 × 45 × 50 6.96 7.62 7.54 8.08 8.53 B41231B4399M000 B41231A4479M000 B41231B4479M000 B41231A4569M000 B41231A4689M000 25 5600 6800 6800 8200 8200 10000 10000 12000 12000 12000 15000 15000 15000 18000 18000 22000 22000 27000 27000 33000 33000 39000 22 22 25.4 22 25.4 22 25.4 22 25.4 30 22 25.4 30 25.4 30 30 35 30 35 30 35 35 × 25 × 30 × 25 × 35 × 30 × 40 × 30 × 45 × 35 × 25 × 50 × 40 × 30 × 45 × 35 × 35 × 30 × 45 × 35 × 50 × 40 × 45 2.65 3.06 3.15 3.45 3.57 3.95 3.89 4.41 4.37 3.99 4.94 4.94 4.50 5.45 5.10 5.38 5.51 6.22 6.12 6.82 6.74 7.35 B41231A5568M000 B41231A5688M000 B41231B5688M000 B41231A5828M000 B41231B5828M000 B41231A5109M000 B41231B5109M000 B41231A5129M000 B41231B5129M000 B41231C5129M000 B41231A5159M000 B41231B5159M000 B41231C5159M000 B41231A5189M000 B41231B5189M000 B41231A5229M000 B41231B5229M000 B41231A5279M000 B41231B5279M000 B41231A5339M000 B41231B5339M000 B41231A5399M000 35 4700 4700 5600 5600 6800 6800 6800 8200 8200 8200 10000 10000 10000 12000 22 25.4 22 25.4 22 25.4 30 22 25.4 30 22 25.4 30 25.4 × 30 × 25 × 35 × 30 × 40 × 30 × 25 × 45 × 35 × 30 × 50 × 40 × 30 × 45 3.06 2.98 3.28 3.39 3.73 3.67 3.76 4.13 4.10 4.22 4.68 4.68 4.58 5.18 B41231A7478M000 B41231B7478M000 B41231A7568M000 B41231B7568M000 B41231A7688M000 B41231B7688M000 B41231C7688M000 B41231A7828M000 B41231B7828M000 B41231C7828M000 B41231A7109M000 B41231B7109M000 B41231C7109M000 B41231A7129M000 Please read Cautions and warnings and Important notes at the end of this document. 11 04/08 AEC-C_B41231_B43231.book Seite 12 Mittwoch, 16. April 2008 2:27 14 Snap-in capacitors Standard series – 85 °C B41231, B43231 Technical data and ordering codes B41231 VR V DC CR 120 Hz 20 °C µF IAC,R 120 Hz 85 °C A Case dimensions d×l mm Ordering code 35 12000 12000 15000 15000 18000 18000 22000 30 35 30 35 30 35 35 × 35 × 30 × 40 × 35 × 45 × 40 × 45 5.11 5.24 5.72 5.88 6.28 6.46 7.07 B41231C7129M000 B41231D7129M000 B41231A7159M000 B41231B7159M000 B41231A7189M000 B41231B7189M000 B41231A7229M000 50 3300 3300 4700 4700 4700 4700 5600 5600 5600 5600 6800 6800 6800 6800 8200 8200 8200 10000 10000 12000 12000 15000 18000 22 25.4 22 25.4 30 35 22 25.4 30 35 22 25.4 30 35 25.4 30 35 30 35 30 35 35 35 × 30 × 25 × 40 × 35 × 25 × 25 × 45 × 40 × 30 × 25 × 50 × 45 × 35 × 30 × 50 × 40 × 30 × 45 × 35 × 50 × 40 × 45 × 50 2.97 3.06 3.83 3.98 3.86 4.19 4.26 4.44 4.35 4.44 4.77 4.76 4.92 5.04 5.43 5.38 5.26 6.07 5.97 6.62 6.55 7.20 7.74 B41231A6338M000 B41231B6338M000 B41231A6478M000 B41231B6478M000 B41231C6478M000 B41231D6478M000 B41231A6568M000 B41231B6568M000 B41231C6568M000 B41231D6568M000 B41231A6688M000 B41231B6688M000 B41231C6688M000 B41231D6688M000 B41231A6828M000 B41231B6828M000 B41231C6828M000 B41231A6109M000 B41231B6109M000 B41231A6129M000 B41231B6129M000 B41231A6159M000 B41231A6189M000 63 1800 2200 2200 2700 2700 3300 3300 3300 3900 3900 3900 22 22 25.4 22 25.4 22 25.4 30 22 25.4 30 × 25 × 30 × 25 × 35 × 30 × 35 × 30 × 25 × 40 × 35 × 30 2.20 2.50 2.58 2.94 3.04 3.14 3.26 3.34 3.60 3.74 3.85 B41231A8188M000 B41231A8228M000 B41231B8228M000 B41231A8278M000 B41231B8278M000 B41231A8338M000 B41231B8338M000 B41231C8338M000 B41231A8398M000 B41231B8398M000 B41231C8398M000 Please read Cautions and warnings and Important notes at the end of this document. 12 04/08 AEC-C_B41231_B43231.book Seite 13 Mittwoch, 16. April 2008 2:27 14 Snap-in capacitors Standard series – 85 °C B41231, B43231 Technical data and ordering codes B41231 VR V DC CR 120 Hz 20 °C µF IAC,R 120 Hz 85 °C A Case dimensions d×l mm Ordering code 63 4700 4700 4700 4700 5600 5600 5600 6800 6800 6800 8200 8200 10000 10000 12000 22 25.4 30 35 25.4 30 35 25.4 30 35 30 35 30 35 35 × 50 × 40 × 35 × 30 × 45 × 35 × 30 × 50 × 40 × 30 × 45 × 35 × 50 × 40 × 45 4.19 4.19 4.10 4.19 4.65 4.58 4.70 5.20 5.16 5.04 5.62 5.53 6.32 6.25 6.83 B41231A8478M000 B41231B8478M000 B41231C8478M000 B41231D8478M000 B41231A8568M000 B41231B8568M000 B41231C8568M000 B41231A8688M000 B41231B8688M000 B41231C8688M000 B41231A8828M000 B41231B8828M000 B41231A8109M000 B41231B8109M000 B41231A8129M000 80 1200 1500 1800 1800 2200 2200 2200 2700 2700 2700 3300 3300 3300 3900 3900 3900 4700 4700 4700 5600 5600 6800 8200 22 22 22 25.4 22 25.4 30 22 25.4 30 22 25.4 30 22 25.4 30 25.4 30 35 30 35 35 35 × 25 × 30 × 30 × 25 × 35 × 30 × 25 × 40 × 35 × 30 × 45 × 40 × 30 × 50 × 45 × 35 × 50 × 40 × 30 × 45 × 35 × 40 × 45 2.24 2.67 2.92 3.01 3.25 3.36 3.45 3.79 3.94 4.05 4.18 4.36 4.27 4.75 4.96 4.89 5.44 5.39 5.27 5.91 5.81 5.46 6.91 B41231A0128M000 B41231A0158M000 B41231A0188M000 B41231B0188M000 B41231A0228M000 B41231B0228M000 B41231C0228M000 B41231A0278M000 B41231B0278M000 B41231C0278M000 B41231A0338M000 B41231B0338M000 B41231C0338M000 B41231A0398M000 B41231B0398M000 B41231C0398M000 B41231A0478M000 B41231B0478M000 B41231C0478M000 B41231A0568M000 B41231B0568M000 B41231A0688M000 B41231A0828M000 Please read Cautions and warnings and Important notes at the end of this document. 13 04/08 AEC-C_B41231_B43231.book Seite 14 Mittwoch, 16. April 2008 2:27 14 Snap-in capacitors Standard series – 85 °C B41231, B43231 Technical data and ordering codes B41231 VR V DC 100 CR 120 Hz 20 °C µF 1200 1200 1500 1500 1500 1800 1800 1800 2200 2200 2200 2700 2700 2700 3300 3300 3300 3900 3900 4700 4700 5600 IAC,R 120 Hz 85 °C A Case dimensions d×l mm 22 25.4 22 25.4 30 22 25.4 30 22 25.4 30 25.4 30 35 25.4 30 35 30 35 30 35 35 Please read Cautions and warnings and Important notes at the end of this document. × 30 × 25 × 35 × 30 × 25 × 40 × 35 × 30 × 45 × 40 × 30 × 45 × 35 × 30 × 50 × 40 × 35 × 45 × 35 × 50 × 40 × 45 2.39 2.46 2.83 2.93 3.00 3.26 3.39 3.49 3.58 3.74 3.66 4.33 4.27 4.37 4.76 4.72 4.85 5.36 5.27 5.86 5.80 6.34 14 04/08 Ordering code B41231A9128M000 B41231B9128M000 B41231A9158M000 B41231B9158M000 B41231C9158M000 B41231A9188M000 B41231B9188M000 B41231C9188M000 B41231A9228M000 B41231B9228M000 B41231C9228M000 B41231A9278M000 B41231B9278M000 B41231C9278M000 B41231A9338M000 B41231B9338M000 B41231C9338M000 B41231A9398M000 B41231B9398M000 B41231A9478M000 B41231B9478M000 B41231A9568M000 AEC-C_B41231_B43231.book Seite 15 Mittwoch, 16. April 2008 2:27 14 Snap-in capacitors Standard series – 85 °C B41231, B43231 Technical data and ordering codes B43231 VR V DC CR 120 Hz 20 °C µF IAC,R 120 Hz 85 °C A Case dimensions d×l mm Ordering code 160 220 270 270 330 330 390 390 390 470 470 470 560 560 560 560 680 680 680 680 820 820 820 820 1000 1000 1000 1000 1200 1200 1200 1500 1500 1800 22 22 25.4 22 25.4 22 25.4 30 22 25.4 30 22 25.4 30 35 22 25.4 30 35 22 25.4 30 35 22 25.4 30 35 25.4 30 35 30 35 35 × 20 × 25 × 20 × 25 × 20 × 25 × 25 × 20 × 30 × 25 × 20 × 35 × 30 × 25 × 20 × 40 × 30 × 25 × 20 × 45 × 35 × 30 × 25 × 50 × 40 × 30 × 25 × 45 × 35 × 30 × 40 × 35 × 40 1.01 1.20 1.32 1.33 1.36 1.45 1.59 1.62 1.69 1.75 1.78 1.96 2.03 2.08 2.12 2.27 2.23 2.29 2.33 2.61 2.59 2.67 2.73 3.01 3.01 2.95 3.01 3.23 3.18 3.26 3.73 3.83 4.39 B43231A1227M000 B43231A1277M000 B43231B1277M000 B43231A1337M000 B43231B1337M000 B43231A1397M000 B43231B1397M000 B43231C1397M000 B43231A1477M000 B43231B1477M000 B43231C1477M000 B43231A1567M000 B43231B1567M000 B43231C1567M000 B43231D1567M000 B43231A1687M000 B43231B1687M000 B43231C1687M000 B43231D1687M000 B43231A1827M000 B43231B1827M000 B43231C1827M000 B43231D1827M000 B43231A1108M000 B43231B1108M000 B43231C1108M000 B43231D1108M000 B43231A1128M000 B43231B1128M000 B43231C1128M000 B43231A1158M000 B43231B1158M000 B43231A1188M000 200 180 220 220 270 270 270 330 330 22 22 25.4 22 25.4 30 22 25.4 × 20 × 25 × 20 × 25 × 25 × 20 × 30 × 25 0.91 1.09 1.11 1.20 1.32 1.35 1.42 1.46 B43231A2187M000 B43231A2227M000 B43231B2227M000 B43231A2277M000 B43231B2277M000 B43231C2277M000 B43231A2337M000 B43231B2337M000 Please read Cautions and warnings and Important notes at the end of this document. 15 04/08 AEC-C_B41231_B43231.book Seite 16 Mittwoch, 16. April 2008 2:27 14 Snap-in capacitors Standard series – 85 °C B41231, B43231 Technical data and ordering codes B43231 VR V DC CR 120 Hz 20 °C µF IAC,R 120 Hz 85 °C A Case dimensions d×l mm Ordering code 200 330 390 390 390 390 470 470 470 470 560 560 560 560 680 680 680 680 820 820 820 820 1000 1000 1200 1200 1500 1500 1800 30 22 25.4 30 35 22 25.4 30 35 22 25.4 30 35 22 25.4 30 35 22 25.4 30 35 30 35 30 35 30 35 35 × 20 × 30 × 25 × 25 × 20 × 35 × 30 × 25 × 20 × 40 × 35 × 25 × 20 × 45 × 40 × 30 × 25 × 50 × 45 × 35 × 30 × 40 × 30 × 45 × 35 × 50 × 40 × 45 1.49 1.54 1.59 1.74 1.77 1.79 1.86 1.90 1.94 2.06 2.14 2.08 2.25 2.38 2.48 2.43 2.48 2.73 2.85 2.81 2.88 3.26 3.18 3.49 3.43 4.06 4.01 4.58 B43231C2337M000 B43231A2397M000 B43231B2397M000 B43231C2397M000 B43231D2397M000 B43231A2477M000 B43231B2477M000 B43231C2477M000 B43231D2477M000 B43231A2567M000 B43231B2567M000 B43231C2567M000 B43231D2567M000 B43231A2687M000 B43231B2687M000 B43231C2687M000 B43231D2687M000 B43231A2827M000 B43231B2827M000 B43231C2827M000 B43231D2827M000 B43231A2108M000 B43231B2108M000 B43231A2128M000 B43231B2128M000 B43231A2158M000 B43231B2158M000 B43231A2188M000 250 150 150 180 180 220 220 220 270 270 270 330 330 330 22 25.4 22 25.4 22 25.4 30 22 25.4 30 22 25.4 30 × 25 × 20 × 25 × 20 × 25 × 25 × 20 × 30 × 25 × 20 × 35 × 30 × 25 0.90 0.92 0.90 1.01 1.09 1.19 1.22 1.28 1.32 1.35 1.50 1.56 1.60 B43231E2157M000 B43231F2157M000 B43231E2187M000 B43231F2187M000 B43231E2227M000 B43231F2227M000 B43231G2227M000 B43231E2277M000 B43231F2277M000 B43231G2277M000 B43231E2337M000 B43231F2337M000 B43231G2337M000 Please read Cautions and warnings and Important notes at the end of this document. 16 04/08 AEC-C_B41231_B43231.book Seite 17 Mittwoch, 16. April 2008 2:27 14 Snap-in capacitors Standard series – 85 °C B41231, B43231 Technical data and ordering codes B43231 VR V DC CR 120 Hz 20 °C µF IAC,R 120 Hz 85 °C A Case dimensions d×l mm Ordering code 250 330 390 390 390 390 470 470 470 470 560 560 560 560 680 680 680 820 820 1000 1000 1200 1500 35 22 25.4 30 35 22 25.4 30 35 22 25.4 30 35 25.4 30 35 30 35 30 35 35 35 × 20 × 40 × 30 × 25 × 20 × 45 × 35 × 30 × 25 × 50 × 40 × 30 × 25 × 45 × 35 × 30 × 40 × 35 × 45 × 40 × 45 × 50 1.62 1.72 1.69 1.73 1.77 1.98 1.96 2.02 2.06 2.26 2.25 2.20 2.25 2.60 2.56 2.62 2.95 3.03 3.40 3.50 3.74 4.35 B43231H2337M000 B43231E2397M000 B43231F2397M000 B43231G2397M000 B43231H2397M000 B43231E2477M000 B43231F2477M000 B43231G2477M000 B43231H2477M000 B43231E2567M000 B43231F2567M000 B43231G2567M000 B43231H2567M000 B43231F2687M000 B43231E2687M000 B43231G2687M000 B43231E2827M000 B43231F2827M000 B43231E2108M000 B43231F2108M000 B43231E2128M000 B43231E2158M000 315 100 120 120 150 150 150 180 180 180 180 220 220 220 220 270 270 270 270 330 22 22 25.4 22 25.4 30 22 25.4 30 35 22 25.4 30 35 22 25.4 30 35 22 × 20 × 25 × 20 × 30 × 25 × 20 × 35 × 30 × 25 × 20 × 40 × 30 × 25 × 20 × 45 × 35 × 30 × 25 × 50 0.68 0.80 0.82 0.96 0.99 1.01 1.11 1.15 1.18 1.20 1.29 1.27 1.30 1.33 1.50 1.49 1.53 1.56 1.73 B43231A0107M000 B43231A0127M000 B43231B0127M000 B43231A0157M000 B43231B0157M000 B43231C0157M000 B43231A0187M000 B43231B0187M000 B43231C0187M000 B43231D0187M000 B43231A0227M000 B43231B0227M000 B43231C0227M000 B43231D0227M000 B43231A0277M000 B43231B0277M000 B43231C0277M000 B43231D0277M000 B43231A0337M000 Please read Cautions and warnings and Important notes at the end of this document. 17 04/08 AEC-C_B41231_B43231.book Seite 18 Mittwoch, 16. April 2008 2:27 14 Snap-in capacitors Standard series – 85 °C B41231, B43231 Technical data and ordering codes B43231 VR V DC CR 120 Hz 20 °C µF IAC,R 120 Hz 85 °C A Case dimensions d×l mm Ordering code 315 330 330 330 390 390 390 470 470 560 680 820 25.4 30 35 25.4 30 35 30 35 35 35 35 × 40 × 35 × 30 × 45 × 35 × 30 × 40 × 35 × 40 × 45 × 50 1.73 1.78 1.83 1.97 1.94 1.99 2.23 2.29 2.62 3.01 3.44 B43231B0337M000 B43231C0337M000 B43231D0337M000 B43231A0397M000 B43231B0397M000 B43231C0397M000 B43231A0477M000 B43231B0477M000 B43231A0567M000 B43231A0687M000 B43231A0827M000 350 82 100 100 120 120 120 150 150 150 180 180 180 180 220 220 220 220 270 270 270 330 330 330 390 390 470 470 560 680 22 22 25.4 22 25.4 30 22 25.4 30 22 25.4 30 35 22 25.4 30 35 25.4 30 35 25.4 30 35 30 35 30 35 35 35 × 20 × 25 × 20 × 30 × 25 × 20 × 35 × 30 × 20 × 40 × 35 × 25 × 20 × 45 × 35 × 30 × 25 × 45 × 35 × 25 × 50 × 40 × 30 × 45 × 35 × 50 × 40 × 45 × 50 0.62 0.73 0.75 0.86 0.88 0.90 1.01 1.05 1.01 1.17 1.21 1.18 1.20 1.35 1.34 1.38 1.41 1.64 1.61 1.65 1.89 1.87 1.83 2.12 2.09 2.43 2.40 2.73 3.13 B43231A4826M000 B43231A4107M000 B43231B4107M000 B43231A4127M000 B43231B4127M000 B43231C4127M000 B43231A4157M000 B43231B4157M000 B43231C4157M000 B43231A4187M000 B43231B4187M000 B43231C4187M000 B43231D4187M000 B43231A4227M000 B43231B4227M000 B43231C4227M000 B43231D4227M000 B43231A4277M000 B43231B4277M000 B43231C4277M000 B43231A4337M000 B43231B4337M000 B43231C4337M000 B43231A4397M000 B43231B4397M000 B43231A4477M000 B43231B4477M000 B43231A4567M000 B43231A4687M000 Please read Cautions and warnings and Important notes at the end of this document. 18 04/08 AEC-C_B41231_B43231.book Seite 19 Mittwoch, 16. April 2008 2:27 14 Snap-in capacitors Standard series – 85 °C B41231, B43231 Technical data and ordering codes B43231 VR V DC CR 120 Hz 20 °C µF IAC,R 120 Hz 85 °C A Case dimensions d×l mm Ordering code 400 68 82 82 100 100 100 120 120 120 150 150 150 150 180 180 180 180 220 220 220 220 270 270 270 330 330 330 390 390 470 470 560 22 22 25.4 22 25.4 30 22 25.4 30 22 25.4 30 35 22 25.4 30 35 22 25.4 30 35 25.4 30 35 25.4 30 35 30 35 30 35 35 × 20 × 25 × 20 × 30 × 25 × 20 × 30 × 25 × 20 × 35 × 30 × 25 × 20 × 40 × 35 × 25 × 25 × 45 × 40 × 30 × 25 × 45 × 35 × 30 × 50 × 40 × 30 × 45 × 35 × 50 × 40 × 45 0.56 0.66 0.68 0.78 0.81 0.82 0.86 0.88 0.90 1.01 1.05 1.08 1.09 1.17 1.21 1.18 1.28 1.35 1.41 1.38 1.41 1.64 1.61 1.65 1.89 1.87 1.83 2.12 2.09 2.43 2.40 2.73 B43231A9686M000 B43231A9826M000 B43231B9826M000 B43231A9107M000 B43231B9107M000 B43231C9107M000 B43231B9127M000 B43231A9127M000 B43231C9127M000 B43231A9157M000 B43231B9157M000 B43231C9157M000 B43231D9157M000 B43231A9187M000 B43231B9187M000 B43231C9187M000 B43231D9187M000 B43231E9227M000 B43231F9227M000 B43231B9227M000 B43231D9227M000 B43231A9277M000 B43231B9277M000 B43231C9277M000 B43231C9337M000 B43231A9337M000 B43231B9337M000 B43231C9397M000 B43231B9397M000 B43231B9477M000 B43231A9477M000 B43231A9567M000 450 56 68 68 82 82 82 100 100 100 22 22 25.4 22 25.4 30 22 25.4 30 × 20 × 25 × 20 × 30 × 25 × 20 × 35 × 30 × 25 0.39 0.46 0.47 0.54 0.56 0.57 0.63 0.65 0.67 B43231A5566M000 B43231A5686M000 B43231B5686M000 B43231A5826M000 B43231B5826M000 B43231C5826M000 B43231A5107M000 B43231B5107M000 B43231C5107M000 Please read Cautions and warnings and Important notes at the end of this document. 19 04/08 AEC-C_B41231_B43231.book Seite 20 Mittwoch, 16. April 2008 2:27 14 Snap-in capacitors Standard series – 85 °C B41231, B43231 Technical data and ordering codes B43231 VR V DC CR 120 Hz 20 °C µF IAC,R 120 Hz 85 °C A Case dimensions d×l mm Ordering code 450 100 120 120 120 120 150 150 150 150 180 180 180 220 220 220 270 270 330 330 390 470 35 22 25.4 30 35 22 25.4 30 35 25.4 30 35 25.4 30 35 30 35 30 35 35 35 × 20 × 40 × 35 × 25 × 20 × 50 × 40 × 30 × 25 × 45 × 35 × 25 × 50 × 40 × 30 × 45 × 35 × 50 × 40 × 45 × 50 0.68 0.73 0.76 0.73 0.75 0.89 0.89 0.87 0.89 1.02 1.01 0.98 1.18 1.17 1.14 1.35 1.33 1.55 1.54 1.74 1.99 B43231D5107M000 B43231B5127M000 B43231A5127M000 B43231C5127M000 B43231D5127M000 B43231A5157M000 B43231B5157M000 B43231C5157M000 B43231D5157M000 B43231A5187M000 B43231B5187M000 B43231C5187M000 B43231B5227M000 B43231A5227M000 B43231C5227M000 B43231A5277M000 B43231B5277M000 B43231B5337M000 B43231A5337M000 B43231A5397M000 B43231A5477M000 500 68 82 82 100 100 120 150 180 220 270 330 22 22 25.4 22 25.4 25.4 30 30 30 35 35 × 30 × 35 × 30 × 40 × 35 × 40 × 35 × 40 × 45 × 45 × 50 0.49 0.57 0.59 0.67 0.69 0.80 0.92 1.06 1.22 1.45 1.66 B43231A6686M000 B43231A6826M000 B43231B6826M000 B43231A6107M000 B43231B6107M000 B43231A6127M000 B43231A6157M000 B43231A6187M000 B43231A6227M000 B43231A6277M000 B43231A6337M000 Please read Cautions and warnings and Important notes at the end of this document. 20 04/08 AEC-C_B41231_B43231.book Seite 21 Mittwoch, 16. April 2008 2:27 14 Cautions and warnings General Also see “Important notes” on page 23. 1 Aluminum electrolytic capacitors have a bi-polar structure. This is marked on the body of the capacitor. A capacitor must not be mounted with reversed polarity. The application of an AC or reverse voltage may cause a short circuit or damage the capacitor. Bi-polar capacitors must not be used in AC applications, where the polarity may be reversed in the circuits or is unknown. 2 The DC voltage applied to the capacitor terminal must not exceed its rated operating voltage, as this will result in a rapid increase of the leakage current and may damage the capacitor. It is recommended to operate the capacitor at 70–80% of its rated voltage to optimize its service life. 3 The ripple current applied to the capacitor must be within the permitted range. An excessive ripple current leads to impaired electrical properties and may damage the capacitor. Note that the sum of the peak values of the ripple voltage and the DC operating voltage must not exceed the rated DC voltage. 4 Capacitors must be used within their permitted range of operating temperature. Operation at room temperature optimizes their service life. 5 Capacitors with case diameter ≥8 mm are equipped with a safety vent. In capacitors fitted with a lead or soldering lug, the safety vent is usually located at the base of the case. It needs sufficient space around it to operate optimally. The following dimensions are recommended: for case diameter d = 8 to 16 mm, more than 2 mm; for d =18 to 35 mm, more than 3 mm; and for d = 42 mm or more, more than 5 mm. 6 Capacitors should not be mounted with the safety vent face down on the board. Do not locate any wire or copper trace near the safety vent. Do not reverse the voltage, as this may result in excess pressure and the leakage of electrolyte. 7 Gas is released through the safety vent when the pressure inside the capacitor is too high. A gaseous liquid around the safety vent does not indicate a leakage of electrolyte. 8 The capacitor should be stored under conditions of normal temperature and in a non-acid, non-alkali environment of normal humidity. Exposure to high temperatures, for example under direct sunlight, will reduce its operating life. If the capacitor is stored in an environment containing acids or alkalis, the solderability of the leads may be affected. 9 The leakage current of an aluminum electrolytic capacitor may increase after a long period of storage. After such storage, the capacitor must be aged by applying the rated operating voltage for 6–8 hours before use. 10 Manual soldering: a Soldering must be performed within the specified conditions. Bit temperature: 350 °C; application time of soldering iron: 3 seconds. b Ensure that the soldering iron does not touch any part of the capacitor body. Please read Cautions and warnings and Important notes at the end of this document. 21 04/08 AEC-C_B41231_B43231.book Seite 22 Mittwoch, 16. April 2008 2:27 14 Cautions and warnings 11 Do not apply excessive force to the leads and terminals. Do not move the capacitor after soldering it onto the PC board and do not carry the PC board by gripping the capacitor. Observe the following rules to prevent undue stress to the capacitor: a Do not tilt or bend the capacitor after soldering. b Ensure that the terminal spacing matches the corresponding hole spacing on the PC board. 12 The aluminum case is not insulated from the cathode. Do not place a conductor under the aluminum capacitors on the PC board as this may cause a short circuit. The case and top of capacitors used in switched mode power supplies have a high-voltage-resistant heat shrink sleeve to ensure safe usage. 13 The leads of capacitors with a case diameter exceeding 14 mm cannot be used for fixing. Please read Cautions and warnings and Important notes at the end of this document. 22 04/08 Important notes Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 23 04/08