Bulletin I2028 rev. D 01/05 105PF40T Stud Version STANDARD RECOVERY DIODES (Lead-Free) Features 105 A High surge current capability Very low VF Major Ratings and Characteristics Parameters 105PF Units 105 A 150 °C 160 A @ 50Hz 2300 A @ 60Hz 2400 A @ 50Hz 23900 A2 s @ 60Hz 26450 A2 s IF(AV) @ TC IF(RMS) IFSM I2t VRRM range 400 V TJ range - 40 to 180 °C www.irf.com case style DO-203AB (DO-5) 1 105PF40T Final I2028 rev. D 01/05 ELECTRICAL SPECIFICATIONS Voltage Ratings Type number 105PF Voltage VRRM, maximum VRSM, maximum non- IRRM max. Code repetitive peak reverse voltage V repetitive peak reverse voltage V @ TJ = 150°C 40 400 500 5 mA Forward Conduction Parameter I F(AV) 105PF Units Conditions Max. average forward current 105 A @ Case temperature 150 °C 180° conduction, half sine wave 150 A 135 °C I F(RMS) Max. RMS forward current 160 A I FSM Max. peak, one-cycle forward, 2300 t = 10ms non-repetitive surge current 2400 t = 8.3ms reapplied t = 10ms 100% VRRM A 1970 I 2t Maximum I2t for fusing 2050 t = 8.3ms reapplied 26450 t = 10ms No voltage 23900 t = 8.3ms reapplied t = 10ms 100% VRRM t = 8.3ms reapplied A2s 19400 17440 I 2√t Maximum I2√t for fusing V F(TO) Value of threshold voltage rf 200 V TJ = TJ max. 1.0 mΩ TJ = TJ max. 1.05 V Value of forward slope Max. forward voltage drop Sinusoidal half wave, Initial TJ = TJ max. kA2√s t = 0.1 to 10ms, no voltage reapplied 0.75 resistance VFM No voltage VIpk= 200A, TJ = 25°C, tp = 400µs rectangular wave Thermal and Mechanical Specifications Parameter 105PF TJ Max. junction operating temperature range -40 to 180 Tstg Max. storage temperature range -40 to 180 RthJC Max. thermal resistance, junction to case RthCS Max. thermal resistance, case to heatsink 0.25 T Allowable mounting torque 2.8 Nm (1) As general recommendation we suggest to tight on hexagon and not on nut (2) Torque must be appliable only to hexagon and not to plastic structure wt Approximate weight Case style 2 0.25 Units Conditions °C °C/W AC operation Mounting surface, smooth, flat and greased Top thread; using bus-bar or plate, only. 25 lbf · in Avoid silicone grease on thread 3.4 +0-10% Nm Bottom base; tighting on nut (1) 30 lbf · in 2.3 +0-10% Nm 20 lbf · in Lubricated threads 17 (0.6) g (oz) unleaded device DO-203AB (DO5) Not lubricated threads Bottom base; tighting on hexagon (2) See Outline Table www.irf.com 105PF40T 105PF Series Conduction Angle 160 30˚ 140 60˚ 90˚ 120˚ 180˚ 120 20 40 60 80 100 120 140 160 120 100 RMS Limit 80 60 40 Conduction Angle 20 150PF Series 0 Peak Half Sine Wave Forward Current (A) 0 40 80 120 30˚ 60˚ 130 90˚ 120 120˚ 110 180˚ DC 100 50 100 150 200 150 100 RMS Limit 50 Conduction Period 105PF Series 0 0 50 100 150 200 Average Forward Current (A) Fig. 4 - Current Ratings Characteristics 1000 800 105PF Series 400 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current www.irf.com 200 Average Forward Current (A) 1200 250 DC 180˚ 120˚ 90˚ 60˚ 30˚ Fig. 3 - Current Ratings Characteristics 1400 1 250 160 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = Tj Max. @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 600 140 Average Forward Current (A) 140 1600 Conduction Period 150 Fig. 2 - Current Ratings Characteristics 160 1800 160 Average Forward Current (A) 180˚ 120˚ 90˚ 60˚ 30˚ 2000 105PF Series 170 Fig. 1 - Current Ratings Characteristics 180 2200 180 0 Maximum Allowable Case Temperature (°C) Maximum Allowable Case Temperature (°C) 0 Maximum Allowable Case Temperature (°C) 180 Peak Half Sine Wave Forward Current (A) Maximum Allowable Case Temperature (°C) Bulletin I2028 rev. D 01/05 250 2500 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial Tj = Tj Max. 2000 No Voltage Reapplied Rated Vrrm Reapplied 1500 1000 500 105PF Series 0 0.01 0.1 1 Pulse Train Duration (s) 10 Fig. 6 - Maximum Non-Repetitive Surge Current 3 105PF40T Final I2028 rev. D 01/05 1 Tj = Tj Max. Transient Impedance Z thJC (K/W) Instantaneous Forward Current (A) 1000 100 Tj = 25˚C 10 105PF Series 1 0.6 0.8 1 1.2 1.4 1.6 Steady State Value RthJC = 0.25 K/W (DC Operation) 0.1 0.01 85HF(R) Series 0.001 0.0001 0.001 0.01 0.1 1 10 Instantaneous Forward Voltage (V) Square Wave Pulse Duration (s) Fig. 7 - Forward Voltage Drop Characteristics Fig. 8 - Thermal Impedance ZthJC Characteristics Outline Table 105PF Case Style DO-203AB (DO-5) All dimensions in millimeters (inches) 4 www.irf.com 105PF40T Bulletin I2028 rev. D 01/05 Ordering Information Table Device Code 105 PF 40 T 1 2 3 4 1 - Current Rating (105 = 105A) 2 - PF = Plastic Package 3 - Voltage Rating (40 = 400V) 4 - T = Top Thread Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 01/05 www.irf.com 5